O estudo realizado com os eletrodos modificados possibilitou verificar a viabilidade técnica de se revestirem eletrodos de baixo hidrogênio E7018 com filmes de plástico PVC, filmes de tinta alumínio spray para altas temperaturas e filmes de Al, para soldas estruturais de alta qualidade.
Concluiu-se que as modificações executadas nos eletrodos atingiram os objetivos esperados em diversos pontos no que tange ao conjunto das propriedades mecânicas e microestruturas, e principalmente quebrou o paradigma da proibição de colocação de novos materiais na poça de fusão de juntas soldadas de aços C-Mn.
Além desse objetivo principal, o estudo possibilitou verificar que:
Os filmes externos de Al, plástico (PVC) e/ou pintura de tinta alumínio para altas temperaturas, adicionados ao eletrodo AWS E7018, estabelecem uma efetiva barreira física à entrada de URA no revestimento do eletrodo.
A quantidade de Hd medido nas amostras modificadas ficou compatível com a classificação AWS para eletrodos de baixo hidrogênio;
Adições de filmes de pintura, PVC e/ou Al ao revestimento do eletrodo AWS E7018 não interferem negativamente na quantidade de Hd no MS;
Os eletrodos revestidos com PVC e/ou pintados apresentaram propriedades mecânicas semelhantes às dos eletrodos de referência, destacando-se a resistência, o teor de C e Mn e a tenacidade;
A microestrutura dos eletrodos pintados e revestidos com PVC é totalmente compatível com as das soldas de aço C-Mn, mostrada pelos eletrodos de referência;
A adição de filmes de alumínio promove um aumento da resistência mecânica da solda depositada e proporcional perda de tenacidade;
Não se evidenciaram significativas mudanças na composição química do depósito de solda após a adição de filmes de plástico PVC e/ou de tinta spray alumínio, exceto por leve aumento na percentagem de C;
Verificou-se após a adição de filmes de Al que a composição química do depósito ficou muito próxima da dos aços TRIP com Al.
SUGESTÕES PARA TRABALHOS FUTUROS
Estudar o efeito desses filmes nos eletrodos destinados a aços de baixa, média e alta liga;
Estudar a menor quantidade de filme de alumínio que pode ser adicionada ao eletrodo para que se atinjam ótimas propriedades mecânicas;
Estudar o regime de resfriamento para as chapas soldadas com eletrodos modificados e sua influência na microestrutura formada; Estudar o comportamento das soldas feitas com os eletrodos
revestidos com os filmes aos diversos tratamentos térmicos;
Estudar a viabilidade econômica de se adicionarem filmes nos eletrodos revestidos de baixo hidrogênio;
Estudar a aplicabilidade desses filmes a outros processos como arame tubular e TIG;
Estudar a possibilidade de soldar aços TRIP ao Al com eletrodos revestidos com filme de Al;
Estudar a alteração dos fumos gerados na soldagem pela adição de filmes de tinta, PVC e Al ao AWS E7018.
REFERÊNCIAS
1. AMERICAN WELDING SOCIETY; AWS D1.1/D1.1M – Structural Welding Code- Steel, Miami, Fl. 2010.
2. AMERICAN WELDING SOCIETY; AWS A4.3-93 – Standard Methods for Determination of the Diffusible Hydrogen Content of Martensitic, Bainitic and Ferritic, Steel Weld Metal Produced by Arc Welding, Miami, FL. 1993 (R2006).
3. AMERICAN WELDING SOCIETY; AWS A5.1/A5.1M – Specification for Carbon Steel Electrodes for Shielded Metal Arc Welding, Miami, FL. 2010. 4. YI, HUI-JUN; LEE, YONG-JUN; KIM, JONG-YUN; KANG, SUNG-SU. Effect of
microstructure and chemical composition on cold crack susceptibility of high-strength weld metal, Journal of Mechanical Science and Technology, p 2185~2193, 2011.
5. KOU, S. Welding Metallurgy, New York, 1987.
6. FORTES, C.; VAZ, C.T. Apostila Eletrodos Revestidos. Elektriska Svetsnings Aktie Bolaget (ESAB), Fevereiro, 2005.
7. PEREIRA, A.S.; BUSCHINELLI, A.J.A.; NIÑO, C.E; KEJELIN, N.Z. Soldagem em Operação de Dutos de Alta Resistência e Baixa Espessura com Ênfase nas Trincas a Frio, Soldagem & Inspeção, Vol. 17, Nº. 2, p.088-095, São Paulo, Abr/Jun 2012.
8. MODENESI, P.J. Soldabilidade dos Aços Transformáveis. Departamento de Engenharia Metalúrgica e de Materiais. Universidade Federal de Minas Gerais, Belo Horizonte, 2012.
9. VAZ, CLAUDIO TURANI, FELIZARDO, IVANILZA, BRACARENSE, ALEXANDRE QUEIROZ, ATT ALL, Desenvolvimento de Eletrodo Revestido do Tipo Baixo Hidrogenio Impermeáveis, UFMG- DEM, XXXVI – Consolda, ABS, 2010.
10. VON HOFE, DETLEF, State of the art of international standardization in the field of wending and allied processes, Dusseldorf, Germany. Soldagem e inspeção.V15.2010.
11. BUBNOFF, D.V.; VENTRELLA, V.A. Relação Entre Microestrutura / Tenacidade ao Impacto do Metal de Solda do Aço API X-70 Soldado Por Eletrodo Revestido AWS E8010-G. Congresso Brasileiro de Ciência dos Materiais - CBECIMAt. Ilha Solteira - SP: [s.n.]. 2002.
12. Da SILVA, R. F. Caracterização da Zona Termicamente Afetada de Aço produzido Via Resfriamento Acelerado. Dissertação de Mestrado. UFMG, abril 2010.
13. TERASHIMA, S.; BHADESHIA, H.K.D.H., Changes In Toughness At Low Oxygen Concentrations In Steel Weld Metals. Science and Technology of Welding and Joining, Vol 11 Nº. 5, p. 509~516. 2006.
14. LEE, H.W.; CHOE, W.H.; PARK, J.U.; KANG, C.Y.; PARK, W.J. Weld metal hydrogen assisted cracking in 50 mm TMCP steel plate with SAW process, Science and Technology of Welding and Joining, v 11, p 243~249, 2006
15. DALLAM, C.B.; OLSON, D.L. Stress and Grain Size Effects on Weld Metal Ferrite Formation. The nucleation rate of acicular ferrite is greatly affected by the austenite grain size. WELDING RESEARCH SUPPLEMENT. P.198-205. May 1989.
16. ALEXANDROV, Boian T., Evaluation of the Influence of Hydrogen on the Cold Cracking Formation in Welded Joints, Summary of dissertation for the degree of Doctor of Philosophy, Technical University of Sofia, October 2001, Bulgaria.
17. RANATOWSKI, EUGENIUSZ, Quantitative Evaluation of Hydrogen Induced Cold Cracking in Welded Joints, Technical University, Mechanical Department, Str. Prof. E. Kaliskiego 7, 85-796 Bydgoszcz.
18. CHUN-ZHAU, MING; SHANG, YI-YING; XIAO, FU REN; ATT ALL, Investigation on the H2S Resistant Behaviors of Acicular Ferrite and Ultrafine Ferrite, Materials Letteres 57(2002) 141-145.
19. HUI-JUN YI, YONG-JUN LEE, JONG-YUN KIM AND SUNG-SU KANG, Effect of microstructure and chemical composition on cold crack susceptibility of high strength weld metal, JMST, Korea, 2011.
20. CWIEK, J. Hydrogen Degradation of High Strength Steel, Journal of Achievements in Materials and Manufacturing Engineering, 2009, volume 37. 21. CRUZ JUNIOR, J. A.; Desenvolvimento do Aço Alto C-Si e Cr com matriz
nanoestruturada de martensita e bainita. Dissertação de Mestrado. UFMG. 2011.
22. SAKINO, YOSHIHIRO; KIM, YOU-CHUL, Effect of Heat Cycle in Multi-layer Welding on Charpy Absorbed Energy in Low and High toughness Steel, JWRI, Vol. 40 (20110, nº 2.
23. Phase Transformation in welding, Suranaree University Technology, sep-dec 2007.
24. SEO, J. S., KIM, H. J., RYOO, H. S., Microstructural Parameter Controlling Weld Metal Cold Cracking, Journal of Achievements in Materials and Manufacturing Engineering, april 2008, vol 27.
25. IIW Sub-Commission IXJ. Guide to the light microscope examination of ferritic steel weld metals. IIW Doc. IX-1533-88, 1988.
26. YU-ISHI, KOMIZO, In-Situ Observation Techniques of Solidifications and Phase Transformations During Welding, JWRI- Joining and Welding Research Institute, 2011, vol 40.
27. NAKO H., HATANO H., OKAZAKI Y., YAMASHITA K., OTSU M., Crystal Orientation Relationships between Acicular Ferrite, Oxide, and the Austenite Matrix, ISIJ International, Vol. 54 (2014), No. 7, pp. 1690–1696.
28. EVANS, G.M., The Effect of Aluminum in Shielded Metal Arc C-Mn Steel Multipass Deposits, Hardness and toughness are most affected by varying levels of aluminum in the weld metal, Zurich Switzerland, 1991, janury.
29. THEWLIS, G. Classification and quantification of microstructures in steels. Materials perspective. Materials Science and Technology, Vol. 20, February 2004.
30. LINNERT, George E., Welding Metallurgy, carbono and alloy steels, fourth edition, AWS, Miami, Florida, USA,1994.
31. FREIRE JÚNIOR, RAIMUNDO CARLOS SILVERIO, MACIEL, THEOPHILO M., DA SILVA, PAULO GUEDES, Avaliação da Susceptibilidade à Formação de Trincas a Frio em Juntas Soldadas de Aços ARBL, DEPARTAMENTO DE ENGENHARIA MECÂNICA - CCT – UFCG.
32. DALCIN, RAFAEL LUCIANO, Estudo da Soldagem Multipasses Entre os Aços Dissimilares Aisi 4140 e Astm A36 sem Tratamento Térmico Posterior, 2012, Horizontina.
33. KEEHAN, E., Effect of Microstructure on Mechanical Properties of High Strength Steel Weld Metals. CHALMERS UNIVERSITY OF TECHNOLOGY AND GÖTEBORG UNIVERSITY, Göteborg, Sweden, 2004
34. LIU, S.; OLSON, D.L. The Role of Inclusions in Controlling HSLA Steel Weld Microstructures. Nucleation of acicular ferrite is accelerated when there is a combination of large austenite grains and a high density of intragranular inclusions. WELDING RESEARCH SUPPLEMENT P.139-149, may 1985.
35. Chemical Reactions and Metal Flow in Welding, Suranaree University Technology, sep-dec 2007
36. PALIZDAR, YAHYA, Understanding the Effect of Aluminium on the Microstructure on Low Level Nitrogen Steel, School of Process, Environmental and Materials Engineering, April 2011.
37. LU, WEIYAN; LI, LIN; WANG, LI; HE, YANLIN; AND HUANG, SHUIGEN. Thermodynamic Assessment and Experimental Investigation of Fe-Al-C System, 2008, China.
38. MASSALSKI, T. B. Binary Alloy Phase Diagrams, Second Edition, v. 1, p. 147. 1990.
39. KIM, HANSOO; SUH, DONG-WOO AND KIM, NACK J., Fe–Al–Mn–C Lightweight Structural Alloys: A Review on the Microstructures and Mechanical Properties. doi:10.1088/1468-6996/14/1/014205. 2013, march.
40. WEGRZIN, T, Proposal of Welding Methods in Terms of the Amount of Oxygen Journal of Achievements in Materials and Manufacturing Engineering, 2011, volume 47.
41. POTAPOV, N. N. Oxygen Effect on Low-Alloy Steel Weld Metal Properties, Oxygen content in submerged arc weld metal depends on the concentration of oxides decomposed in the weld pool slag, Welding Dept., Scientific Industrial Corp. of Machinery Technology, Moscow, Russia, august 1993.
42. POKHODNYA, I. K. AND SHVACHKO, V. I., Effect of Hydrogen on Structure of Steel Welds, E. 0. Paton Electric Welding Institute, Kiev, 252650, ht. 1. Hydrogen Energy, Vol. 22, No. 2/3, Pp. 285-289, 1997, Ukraine.
43. EAGAR, T. W., Oxygen and Nitrogen Contamination During Arc Welding, Department of Materials and Engineering – Massachusetts Institute of Technology, 1979, Cambridge.
44. YAZDIPOUR, N., HAQ, A.J., MUZAKA,K., PERELOMA, E.V., 2D Modelling of the Effect of Grain Size on Hydrogen Diffusion in X70 Steel, School of Mechanical, Materials & Mechatronic Engineering, University of Wollongong, Wollongong, NSW 2522, Computational Materials Science 56 (2012) 49–57, Australia.
45. BOELLINGHAUS, TH., WONGPANYA, P. Modeling of Hydrogen Assisted Cold Cracking in High Strength Steel Welds, Disponível em: < http://www.sut.ac.th/engineering/Metal/pdf/papers%20pornwasa/Jackson%20200 8.pdf>.
46. VAZ, CLAUDIO TURANI, FELIZARDO, IVANILZA, BRACARENSE, ALEXANDRE QUEIROZ, ATT ALL, Desenvolvimento de Eletrodo Revestido do Tipo Baixo Hidrogenio Impermeáveis, UFMG- DEM, XXXVII – Consolda, ABS, 2011.
47. SANTIAGO, GUSTAVO HUGO, VAZ, CLAUDIO TURANI, BRACARENSE, ALEXANDRE QUEIROZ, Avaliação da influência do Teor de Polímeros Sobre as Propriedades do Metal de Solda Produzido com Eletrodo Impermeáveis, UFMG- PPGMEC, XXXVIII – Consolda, ABS, 2012.
48. ASTM E 1245-94, Standart Test Methods for Determining the Inclusion or Second-Phase Constituent Content of Metals by Automatic Image Analysis, 1994.
49. BABU, S.S. et al., Modeling and Characterization of Nonequilibrium Weld Mcrostructure Evolution, 7th Internetional Conference on Numerical Analysis of Weldability – IIW, october 2003.
50. VAZ, C., Influência do polímero utilizado como aglomerante em eletrodos revestidos básicos sobre a formação de Ferrita Acicular no metal de solda, UFMG, 2014.
51. EVANS, G.M., Effect of Manganese on the Microstructure and Properties of All-Weld-Metal Deposits WJ, 1980.
52. SVENSSON, L E, B. GRETOFT, Microstructure and Impact Toughness of C- Mn Weld Metals. The formation of acicular ferrite in over half of the weld appears to be the key to improving impact toughness, WJ, dec. 1990.
53. EVANS, G. M., Factors Affecting the Microstructure and properties of C-Mn All-Weld-Metal Deposits WJ.
54. AMIRTHALINGAM, MURUGAIYAN, Microstructural Development during Welding of TRIP Steels, Department of Material Science and Engineering, Faculty of 3mE, Delft University of Technology, Netherlands, India, 2010, October.
55. BS EN ISO 3690:2012 WELDING AND ALLIED PROCESSES – Determination of hydrogen content in arc weld metal. BSI Standards Publication.
56. YURIOKA, N; SUZUKI, H.; Hydrogen assisted cracking in C-Mn and low alloy steel weldments. International Materials Reviews, 1990, Vol. 35, N.4.
57. WALLACE JOHN F., A Review of Welding Cast Steels and its Effects on Fatigue and Toughness Properties, Case Western Reserve University. Cleveland. Ohio.
58. LUU, W.C. and WU, J.K., The Influence of Microstructure on Hydrogen Transport in Carbon Steels, Institute of Materials Engineering, National Taiwan Ocean University, Keelung, Corrosion Science, Vol. 38, No. 2, pp. 239-245. 1996, Taiwan 20224.
59. BEIDOKHTI, B., DOLATI, A., KOUKABI, A.H., Effects of Alloying Elements and Microstructure on the Susceptibility of the Welded HSLA Steel to Hydrogen-Induced Cracking and Sulfide Stress Cracking, Materials Science and Engineering A 507 (2009)167 – 173.
60. TEMIZEL, GUVENC; OZENBAS, MACIT; Intermetallic Phase Formation at Fe- Al Film Interfaces, Department of Metallurgical and Materials Engineering, Middle East Technical University, 06531 Ankara – TURKEY, 2006, august. 61. CONNETABLE, DAMIEN; LACAZE, JACQUES; MAUGIS, PHILIPPE;
SUNDMAN, B. (2008), A Calphad Assessment of Al–C–Fe System with the Carbide Modelled as an Ordered Form of the fcc Phase. Calphad, vol. 32 (n° 2). pp. 361-370. ISSN 0364-5916.
62. NAYAKA, S.S., BALTAZAR HERNANDEZ, V.H., OKITA, Y., ZHOU, Y., Microstructure–Hardness Relationship in the Fusion Zone of TRIP Steel welds, Materials Science and Engineering A 551 (2012) 73–81.
63. SWENSON, L.E.; Control of microstructures and properties in steel arc welds, CRC Press USA 1994.
64. PALIZDAR, Y., COCHRANE, R.C., BRYDSON, R., SAN MARTIN, D., SCOTT, A. J., The effect of deliberate aluminum additions on the microstructure of rolled steel plate characterized using EBSD. 2010.
65. CWIEK, J., BACZYNSKA, M., Behaviour of nitride layers subjected to influence of hydrogen, Materials Science of Engineering, 2010, V 43.
66. BABU, S.S., DAVID, S.A., VITEK, J.M., DEBROY, T., Phase Transformation and Microstructure Development in Low Alloy Steel Welds, Vancouver, Canada, 1995.
67. DIAS, F. DA CRUZ, Uso do software Image J para análise quantitativa de imagens de microestruturas de materiais, INPE, 2008.
68. CAJU, M.G., Avaliação do nível de hidrogênio difusível no metal de solda depositado por diferentes eletrodos revestidos, UFRGS, 2012.
69. OLIVEIRA, S.P., MIRANDA, P.E.V., Concentração crítica de hidrogênio para a fragilização pelo hidrogênio em aços, Coppe/UFRJ, PEMM, Laboratório de Hidrogênio.
70. PADHI, G. KUMAR, KOMIZO, YU-ICHI, Difusible hydrogen in steel weldments – A status review, JWRI.V42.2013.
71. VAZ, C. T., BRACARENSE, A. Q., Influência do uso de PTFE como aglomerante em eletrodos revestidos básicos sobre a formação de ferrite acicular no metal de solda.
72. SURIAN, E., TROTTI, R.H., VEDIA, L.A. Influence of carbon on mechanical properties and microstructure of weld metal from a high strength SMA electrode, WJ, 1991.
73. LUPPO, M.I., OVEJERO-GARCIA, J. The influence of microstructure on the trapping and diffusion of hydrogen in a low carbon steel, Corrosion Science, V 32, 1991.
74. ASTM E 562, Standard Test Method for Determining Volume Fraction by Systematic Manual Point Count – American Society for Testing and Materials, Philadelphia, PA, 1995.
75. XIA, M., et al., Fuzion Zone Microstructure Evolution of Al-Alloyed TRIP Steel in Diode Laser Welding. Materials Transaction, Vol. 49. No.4 (2008) pp. 746 to 753.
76. LIS, A., DRYJA, M.; Microstructure Characterization of TRIP Steel CMnAlSi. GSTF Journal of Engineering Technology (JET) Vol. 2 No. 3, Dezembro de 2013. 77. EVANS, G. M., Effect of Manganese on the Microstructure and Properties of All-Welding-Metal Deposits. Supplement to the Welding Journal, March, 1980.
78. MAZIASZ P.J., GOODWIN G. M., ALEXANDER D. J. VISWANATHAN S., Alloy development and processing of FeAl – An overview, ASM international, Materials Park, OH, 1997.
79. MARKER, M., RICHTER, KLAWS W., Phase – Equilibria and Structural Investigation in the System Al - Fe – Si, Department of Inorganic Chemistry, Materials Chemistry, TOFA, Porto, 2010, September.
BIBLIOGRAFIA CONSULTADA
1. SOUZA E SÁ, A.R.D. Influência do Alumínio nas Propriedades Mecânicas do ADI (AUSTEMPERED DUCTILE IRON), Dissertação de Mestrado, p. 84, Belo Horizonte, MG. 2004, UFMG.
2. SALGADO, M.V.D.S.; SESMA, N.M.; MAGALHÃES, W.S.; Soldagem TIG.
Disponível em:
<http://sistemas.eel.usp.br/docentes/arquivos/984972/LOM3076/TrabalhoTIG.pdf >
3. PUC – RIO certificação digital Nº 0421070/CA. 4. PUC – RIO certificação digital Nº 0321311/CA.
5. LIMA, LUCIANA IGLÉSIAS LOURENÇO, Influência da Concentração de Hidrogênio na Suscetibilidade à Corrosão Sob Tensão de Junta Soldada com Metais Dissimilar em Ambiente do Circuito Primário de Reator Nuclear, Belo Horizonte, DEM - UFMG, 2011, MG.
6. JAIWAL, DEEPTI, Analyzing the Effect of Parameters in Submerged Arc Welding Process, Department of Mechanical Engineering, Indian Institute of Technology, International Journal on Theoretical and Applied Research in Mechanical Engineering. ISSN, 2319 – 3182, Volume 2, Issue - 2, 2013.
7. FELIZARDO, I., BRACARENSE, A. Q., Processo de Soldagem com Eletrodo Revestido.
8. Estudo da zona Fundida, Transformações no Estado Sólido em Aços Carbono e Baixa Liga, Microestruturas Secundária e Terciária, UFSC, LABSOLDA.
9. EVANS, G. M., The Effect of Titanium in Manganese-Containing SMA Weld Deposits, A delicate balance between Ti and Mn contents must be attained before their full benefit to weld properties is realized, Zurich Switzerland,1993, march.
10. ALCANTARA, N. G. AND ROGERSON, J. H., A Prediction Diagram For Preventing Hydrogen-Assisted Cracking in Weld Meta A new concept — Average Cracking Coefficient — is introduced to help predict safe welding conditions to avoid hydrogen-assisted cracking in weld metal, 1984, april.
11. GUEDES, F.M.F., MAFFI,S., RAZZINI, G., PERALDO BICELLI, L., PONCIANO, J.A.C., Scanning Photoelectrochemical Analysis of Hydrogen Permeation on ASTM A516 Grade 60 Steel Welded Joints in a H2S Containing Solution, COPPE/UFRJ, 2003.
13. BESSON, RÉMY; LEGRIS, ALEXANDRE; CONNETABLE, DAMIEN; MAUGIS, PHILIPPE, (2008), Atomic-scale study of low-temperature equilibria in iron- rich Al-C-Fe. Physical Review B: Condensed Matter, vol. 78 (n° 1). 014204-1- 014204-11. ISSN 1098-0121.
14. SCHMIDOVÁ, EVA, Material Analyses of High Strength Steels for Automotive Safety Parts, Department of Mechanics, Materials and Machine Parts, UNIVERSITY OF PARDUBICE, 2012.
15. LÓPEZ CORTÉZ, VICTOR H., PÉREZ MEDINA, GLADYS Y., REYES VALDÉZ FELIPE A., LÓPEZ, HUGO F., Effects of the Heat Input in the Mechanical Integrity of the Welding Joints Welded by GMAW and LBW Process in Transformation Induced Plasticity Steel (TRIP) Used in the Automotive Industry.
16. Transformações no estado sólido em aços carbono e baixa liga, microestrutura segundária e terciária, Labsolda, UFSC.
17. POPOVIC, O., BURZIC, M., CVETKOVIC, R.P., MILUTINOVIC, Z., The effect of heat input on the weld metal toughness of surface welded joint, 14th
International Research/Expert Conference, TMT 2010.University of Belgrade Serbia.
18. SOARES DE ALBUQUERQUE, M.C., EVANGELISTA DE LIMA, I., MACIEL, T.M., Avaliação das propriedades mecânicas de um metal de solda de uma junta soldada de uma tubulação de aço ARBL, CBEM, 1999.
19. FONSECA, M. A., LACERDA, J.C., MEDEIROS, C.S., Efeito do insumo de calor na microestrutura da solda do aço NTU-SAR50 pelo processo a arco submerso.
20. VAZ, C,T., BRACARENSE, A.Q., FELIZARDO, I., PESSOA, E.C.P., Estudo da microestrutura e propriedades do metal de solda depositados por eletrodos revestidos impermeáveis do tipo baixo hidrogênio.
21. ASTM E 260 – Standard practice for packed column gas chromatography. 22. ROB DEKKERS, Ph.D. Thesis, Katholieke Universiteit Leuven, Leuven, Belgium
(2002).
23. VIANA, C.S., CHICOT, D., LESAGE, J., MIRANDA, P.E.V., Difusão do hidrogênio em martensita, Revista Matéria, 2004.
24. VIEIRA DE ARAÚJO, M.R., Caracterização microestrutural do metal de solda depositado por arco submerso em chapas de aço carbono estrutural, UNESP, 2006.
25. PAPIENNIK, S. K., YATES, S. R., CHELLEMI, O. D., A standardized approach for estimating the permeability of plastic films to soil fumigants under various field and environmental conditions, American society of agronomy, 2010.
26. FABRIS, S., FREIRE, M.T. DE A., REYES, FLEIX G. R., Embalagens plásticas: tipos de materiais, contaminação de alimentos e aspectos de legislação, Revista Brasileira de Toxicologia, 2006.
27. AGNELLI, J. A. M. Glossário de termos técnicos aplicados a polímeros, Boletim Técnico, Brasken, (2000).
28. FRAGA, F.E.N., TREVISAN, R.E., Influência da temperatura de pré- aquecimento em cordões de solda usando o teste G-Bop, UNICAMP, Faculdade de Eng. Mecânica, Dep. de Eng. de Fabricação.
29. SURIAN, E., TROTTI, R.H., DE VEDIA, L.A. All-weld-metal design for AWS E10018M, 11018M and 12018M type electrodes – The best combination of alloying elements to provide optimum toughness and strength is investigated, WJ, 1999.
30. MAROUÇO, E S; DINIZ, J. L. C., SANTOS FILHO, O. R., DE SOUZA, L. F. G., JORGE, J. C. F., Estudo do aporte térmiconas propriedades mecânicas de metais de solda de aço C-Mn obtidos pelo processo de arco submerso, dx.doi.org.10.4322/tmm.2013.018.
31. FLANIGEN, E.M., HILL, D.C., Union Carbide Corporation, US patent 4045593A, august 1977.
32. BOLLIENGHAUS, T; HOFFMIESTER, H; MIDDEL, C., Wending in the world, 1996.
33. GAJDA, B.; LIS, A. K., A study of microstructure and phase transformations of CMnAlSi TRIP steel. JAMME, Vol. 31. Issue 2. Dezembro de 2008.
34. NAYAK, S. S. et al., Microstructure-hardness relationship in the fuzion zone of TRIP steel welds. Materials Sciense and Engineering A 551 (2012) 73-81. 35. CORTÉZ, V. H. L., et al., Effects of the Heat Imput in the Mechanical Integrity
of the Welding Joints Welded by GMAW and LBW Process in Transformation Induced Plasticity Steel (TRIP) Use Used in the Automotive Industry. Soldag. Insp. São Paulo. Vol. 15. No.3. p. 234-241, Set. 2010.
36. VAN DER BURG, M. A. et al., Influence of Microstructure on Mechanical Properties od Two Sigle-Bead Ferritic Weld Metals. Supplement to the Welding Journal, March, 1985.
37. BS EN ISO 9016:2012, Destructive tests on welds in metallic materials – Impact tests – Test specimen location, notch orientation and examination. 38. ASTM A 488, Standard Practice for Steel Castings, Welding, Qualifications
of Procedures and Personnel, 2010.
39. VOTORANTIM. Folhas. Companhia Brasileira de Alumínio. Vetoral Folhas,
disponível em: <http://www.vmetais.com.br/pt-
BR/Negocios/Aluminio/Documents/Cat%C3%A1logo%20Folhas%20de%20Alum %C3%ADnio.pdf>.
APÊNDICE A – EFEITO NO HEAT INPUT
De acordo com resultados expressos na Tabela A.1, observa-se que todos os CPs apresentaram valores médios de aporte térmico (heat input) menor que 3,0 kJ/mm. Nota-se que o CP ALPI apresentou, dentre todos, a maior energia de soldagem.
Tabela A.1– Valores médios do aporte térmico dos CPs
CPs Tensão (V) Corrente (A) Velocidade (mm/min) Aporte Térmico (kJ/mm) ST01 23,2 160,5 158,09 1,45 BRH4R 27 150 162,5 1,48 PI 24,3 160,5 180 1,31 PVC 28 127 195 1,10 ALPI 27 188 197,5 1,55
Legenda: Eletrodos de referência Negrito: Melhores Resultados.
Para cálculo do valor médio de aporte térmico, foram medidos para cada