MARINE GEOTECHNICAL DESIGN

Most relevant cross sectional properties for the three different kinds of pontoon column cross sections applied in the global analyses are presented in Table 4-1.. Each stay cable

This Appendix includes results from static GeoSuite Stability calculations for the profiles shown in Figure 1-1.. The stability calculations are performed with both undrained and

This Enclosure shows stability checks of the back columns and tower of the cable stayed bridge for critical construction stages and the complete states.. Reference is made to

In the following effective areas and effective wind areas (including drag factors) are calculated for the climbing formwork at the top of the axis 1E column. These parameters apply

The effect of the proximity of the sea surface on the aerodynamic load coefficients was investigated separately in a wind tunnel test where the deck section was set close to the

The above procedure is illustrated in the example below which pairs the aerodynamic derivatives shown in Figure 3.2 with the structural properties of Storebælt East bridge

Concept development, floating bridge E39 Bjørnafjorden. Appendix G –

Concept development, floating bridge E39 Bjørnafjorden. Appendix G –