DEL 3: GJELDENDE REGELVERK
3.6 Innberetning av straffbare forhold; straffegrunnlag og strafferamme
3.6.7 Brudd på skatte- og avgiftslovgivningen
3.6.7.4 Innberetning av brudd på skatte- og avgiftslovgivningen
Fonte: Autor
PAREDE 05(a) E PAREDE 06 (b) – SEM ESCALA
(a) (b)
Fonte: Autor
PAREDE 07 – SEM ESCALA
PAREDE 08 – SEM ESCALA
Fonte: Autor
PERSPECTIVAS
PERSPECTIVA A – VISTA P01 E P04
PERSPECTIVA B – VISTA P02 E P03
Fonte: Autor
PERSPECTIVA C – VISTA AÉREA A PARTIR DA P01
8 ^ ; T /
OBS: Considerar continuidade das paredes P08 e P10 com a unidade vizinha. LISTA DE QUANTITATIVOS
Fonte: Autor
PLANTAS
PLANTA BAIXA – LINHAS DE REFERÊNCIA SEM ESCALA
PLANTA BAIXA – PRIMEIRA FIADA SEM ESCALA
PLANTA BAIXA – SEGUNDA FIADA SEM ESCALA
ELEVAÇÕES EM CORTE PAREDE P01 – SEM ESCALA
Fonte: Autor
PAREDE P02 – SEM ESCALA
Fonte: Autor
PAREDE P03 – SEM ESCALA
PAREDE P04 – SEM ESCALA
Fonte: Autor
PAREDE P05 (a) e PAREDE P06 (b) – SEM ESCALA
(a) (b)
Fonte: Autor
PAREDE P07 – SEM ESCALA
PAREDE P08 – SEM ESCALA
Fonte: Autor
PAREDE P09 – SEM ESCALA
Fonte: Autor
PAREDE P10 – SEM ESCALA
PERSPECTIVAS
PERSPECTIVA A – VISTA A PARTIR DA PAREDE P8
Fonte: Autor
PERSPECTIVA B – VISTA A PARTIR DA PAREDE P10
PERSPECTIVA C – VISÃO AÉREA A PARTIR DA PAREDE P10
Fonte: Autor
PERSPECTIVA D – VISTA EM DETALHE DE UMA UNIDADE HABITACIONAL
^ ! ' [ ? ?" ' N `X "" , B " = *%9 (
Fonte: Graphisoft, 2011
`X "" ,
Represents a wall element.
, ' a ` " !`T ; * ; * $ ; * 3 ; * . #$ ; * ; * ' ; * ; * ; * ; * ; * ; * #$ ; ++ "K ; ++ "K ' ; ++ "K $ ; ++ "K ; ++ "K ; ++ "K ; ++ "K I1J/K; `X "" , $ ; `X "" ; ?" ; ?" ; ?" ( ; ?" ( 1; ?" ; ?" 1; ?" ; ; E> ; `S " + - ; * J I K; * ; * $ ; ++ "K * $. $; ++ "K I/J3K; ` ,2 ? " , % $; `/ Y & (# ; ` ; ` ; ` ",& $; E> ; E> ! ; E> ; E> ! ; E> ; E> ! ;
?" ; ` ; ++ "K ; ++ "K L ; ++ "K ; ++ "K I3; E> $; ++ "K $; ++ "K I7; * % . ; * % . #$ ; * IG; ` " ! " , $* ; ` " !2 . */ ! % ; ?" ; ?" ; E> I8J7K; b IL #$ ;
!?
*General element header.
Pen attribute index of wall's contour. / ,
The linetype index of wall's contour. E
The pen index of wall's contour in 3D.
? " .2 ./ ,
Line type used when "OutLines Only" is selected from the "Floor Plan Display" popup. Corresponds to the "Uncut Lines" value in the Wall Settings dialog. ' ""
The pen index of wall's hatch OR pattern. ' ""
The pen index of wall's hatch background (0 = transparent). ' ""
Fill index of wall's hatch. Negative value means composite structure. '
Material index of the surface on the reference line side. Material index of the opposite surface.
Material index of the side surfaces. ' "
Attribute index of the extruded profile (0 if not profiled). See API_ProfileAttrType. ' " ,
The type of the cross section of the wall:
APISect_Normal Simple cross section element
APISect_Poly Profiled cross section element
APISect_Slanted Slanted cross section element
APISect_Trapez Trapezoid cross section element !
Not used. !
Use the composite structure's backgound pen to draw the composite. ", * &
The polygon wall's corners can be changed in case of L and T connections.
! /
Use the composite structure's contour line pen to draw the composite.
! /
Use the composite structure's separator line pen to draw the composite. ! 0 ""
Use the composite structure's fill pen to draw the composite. ,
The type of the geometry of the wall (see API_WallTypeID). The location of the reference line (see API_WallDirID). The height of the wall relative to its bottom.
? !
Base height of the wall relative to the floor level. * Y
The thickness of the wall at the beginning point.
* Y ;
The thickness of the wall at the end point. ''
The offset of the wall's base line from reference line at the beginning point (invalid for center wall directions).
'' ;
The offset of the wall's base line from reference line at the end point (invalid for center wall directions).
" &T &*
The height of the log for log walls (0 means normal wall). ? !0" &
APIWBeam_RefMater Apply Reference side material on horizontal edges.
APIWBeam_OppMater Apply Opposite side material on horizontal edges.
APIWBeam_HalfLog Start with half log.
APIWBeam_QuadricLog Use square (quadric) logs.
APIWBeam_AbsYZ Align texture to wall edges
APIWBeam_Stretched The log radius is measured from the opposite side.
APIWBeam_RightLog The logs are curved on the right side of the wall.
APIWBeam_LeftLog The logs are curved on the left side of the wall. = "
Defines the wall's relation to zones (see API_ZoneRelID). '
Some information in string form. Appears on top of the listing page of the Wall Settings dialog.
/
The pen attribute index of wall's separator lines. / ,
The linetype index of wall's separator lines. % ? " ,
The option to define which stories display the wall. ,2 ? " ,
Recalculate the story visibility automatically according to the actual vertical extent of the wall.
" Y &
Mode of linking to home story. ? &
The start (beginning) coordinate of the wall. The end coordinate of the wall.
",
The original outline of the wall. /
The index of the reference line beginning corner (if less than 0 then beginning edge). /
The index of the reference line end corner. '
The index of the reference material edge start. '
The index of the reference material edge end. The index of the opposite side material edge start. The index of the opposite side material edge end. &"
The rotation angle of the wall in radians. " ? "
Guid of text showing ID [info] (see API_Guid). / ? "
* X .
* ' "" `E
. "" ,
The priority of the wall in 2D and 3D intersections on a 1 to 16 scale.
Its actual values can be between 4300 and 5800; the conversion formula from the slider control value of the Wall Settings:
wallConnPriority = (value + 42) * 100.
! ,
For composite walls: use the priorities defined for each skin of the composite wall attribute instead of applying the uniform wall priority value set above.
? % 2 ./
Pen used when "Overhead All" is selected from the "Floor Plan Display" popup. Corresponds to the "Overhead Line Pens" value in the Wall Settings dialog.
? % 2 ./ ,
Line type used when "Overhead All" is selected from the "Floor Plan Display" popup. Corresponds to the "Overhead Lines" value in the Wall Settings dialog.
" ,
% . */ !
Determines which part of the wall is visible for multi story walls. " " *
Defines the angle for slanted and double slanted walls. "
Defines the angle for double slanted walls.
!
Y
For wall related memo data see the ACAPI_Element_GetMemo function.
@
!
2 + API 2.1 or later
^ ! ' [ ? ?" ' N `X "" " B
" = *%9 (
Fonte: Graphisoft, 2011
`X ""
"
Structure for retrieving connection data of a wall.
, ' a ` MM ; E> MM ; ` ", MM ; E> I1; ` ",& $; ` ! MM ; ` ! MM ! ; ` ! MM - ; ` ! MM ; ` ! MM =; E> I/JGK; E> ; E> ! ; E> - ; E> ; E> =; E> I3JGK; b IL - ;
!?
Coordinates of the modified outline polygon
Indices of the end coordinates of the subpolygons
Arc segments of the modified outline polygon ",
Modified outline polygon due to the connections &
List of walls connected to the beginning point of the wall with their beginning or end point (see figure).
List of walls connected to the end point of the wall with their beginning or end point (see figure).
'
List of walls connected with their reference line to the beginning or the end point of the wall (see figure).
List of walls connected to the reference line of the wall not at the endpoints (see figure)
List of walls having intersection with the reference line of the wall (available from 2.1)
&
Number of conBeg indices
Number of conEnd indices '
Number of conRef indices
Number of con indices
Number of conX indices (available from 2.1) < " , ' & ' . "" "
!
Y
To learn more about the usage of the wall relation structure please refer to the ACAPI_Element_GetRelations function.
@
!
2 + API 1.3 or later