Statement of changes in equity
Note 2 Accounting policies
Após as análises e avaliação dos efeitos de variáveis de processamento térmico nas transformações de fase ferrita-austenita do aço inoxidável duplex UNS S32304 submetido a ciclos térmicos variados, concluiu-se que:
1- A temperatura de pico de 1250°C aplicada à liga por 10 minutos não leva à ferritização completa da microestrutura. No entanto, a temperatura de pico de 1300°C aplicada por 10 minutos resulta numa microestrutura completamente ferritizada de grãos grosseiros equiaxiais. Mesmo sob uma alta taxa de resfriamento (200°C/s) a partir da microestrutura completamente ferritizada, a austenita é reformada nos contornos de grãos ferríticos e inclusões da matriz; 2- Os grãos ferríticos crescem à medida que as lamelas de austenita pré-existente são dissolvidas. O tamanho médio dos grãos ferríticos, mantidos na temperatura de 1300°C, é proporcional à raiz quadrada do tempo (s);
3- A taxa de resfriamento (alta = 200°C/s ou baixa = 2°C/s) altera fortemente a morfologia da austenita reformada durante o resfriamento. Sob altas ou baixas taxas, a austenita se forma na seguinte sequência em função do abaixamento da temperatura: primeiramente como austenita alotriomórfa, seguida pela austenita de Widmanstätten e, por fim, como austenita intragranular. Sob um alto grau de superresfriamento (taxa de resfriamento elevada) a taxa de nucleação da austenita é aumentada, porém, o menor tempo em temperaturas elevadas torna a difusão cada vez mais desfavorecida durante o resfriamento. Se o grau de superresfriamento é diminuído (taxa de resfriamento baixa) a taxa de nucleação também diminui. Porém, o crescimento difusional da austenita é favorecido nas temperaturas mais elevadas durante o resfriamento. Se o resfriamento é iniciado a partir de uma microestrutura completamente ferrítica, a fração final de austenita aumenta à medida em que se aumenta a taxa de resfriamento. A fração final de austenita sempre segue a mesma tendência (polinomial de ordem 2) em função da temperatura isotérmica de manutenção: a fração de austenita reformada aumenta à medida que se diminui a temperatura de isoterma de 1150°C até 950°C e diminui de 950°C até 850°C, independentemente da taxa de resfriamento e do nível de ferritização (durante o aquecimento) da microestrutura.
4- Se durante o aquecimento a austenita não é completamente dissolvida, a reformação da austenita ocorre preferencialmente a partir da interface austenita/ferrita (pré-existente) em forma de pequenos “braços” em função das perturbações na interface (dependendo da taxa de
75 resfriamento). A fração final de austenita será maior nesse caso, onde a condição microestrutural inicial (antes do resfriamento) é parcialmente ferritizada.
5- Durante o aquecimento da liga UNS S32304 a temperaturas elevadas, a matriz ferrítica se torna supersaturada em elementos de liga gamagêneos, principalmente em N, à medida que ocorre a dissolução da austenita. Logo, nitretos de cromo precipitam nos contornos de grãos e subcontornos da matriz ferrítica durante o resfriamento. Quanto maior o nível de ferritização da microestrutura, maior será a quantidade de nitretos de cromo formada durante o resfriamento, mesmo sob taxas de resfriamento mais lentas. Os nitretos de cromo podem ocorrer
na forma de Cr2N ou CrN, sendo esta última, sua forma menos estável e, portanto, menos
comum. Uma extensa precipitação de nitretos de cromo faz com que a fração final de austenita seja diminuída.
76
7. SUGESTÕES PARA TRABALHO FUTUROS
1- Estudo das transformações de fases durante o aquecimento da liga UNS S32304 sob diferentes taxas de aquecimento utilizando-se um dilatômetro de têmpera;
2- Estudo, via EBSD 3D, dos efeitos do processamento térmico nas transformações de fase ferrita/austenita da liga UNS S32304;
3- Estudo, via TEM, das relações cristalográficas entre nitretos de cromo/ferrrita/austenita precipitados durante o resfriamento da liga UNS S32304 na condição completamente ferritizada.
4- Efeito da fração e de diferentes morfologias de austenita sobre propriedades mecânicas básicas, tenacidade à fratura, fadiga e resistência à corrosão da liga UNS S32304.
77
REFERÊNCIAS BIBLIOGRÁFICAS
[1] HERRERA, C.; PONGE, D. e RAABE, D. Design of a novel Mn-based 1 GPa duplex stainless TRIP steel with 60% ductility by a reduction of austenite stability. Acta Materialia, v.
59, p. 4653–4664. 2011.
[2] WAN, J.; RAN, Q.; LI, J.; XU, Y.; XIAO, X.; YU, H. e JIANG, L. A new resource-saving,
low chromium and low nickel duplex stainless steel 15Cr–xAl–2Ni–yMn. Materials and
Design, v. 53, p. 43-50. 2014.
[3] LODOÑO, A. J. R. Precipitação De Fases Intermetálicas E Austenita Secundária Na Zac De Soldagens Multipasse De Aços Inoxidáveis Duplex, 2001.Tese. Universidade de São Paulo. [4] CHEN, T. H.; YANG, J. R. Microstructural characterization of simulated heat affected zone in a nitrogen-containing 2205 duplex stainless steel. Materials Science & Engineering A, v. 338, p. 166-181. 2002.
[5] TAN, H; WANG, Z; JIANG, Y; YANG, Y; DENG, B.; SONG, H.; LI, J. Influence of welding thermal cycles on microstructure and pitting corrosion resistance of 2304 duplex stainless steels. Corrosion Science, v. 55, p. 368-377. 2012.
[6] CHEN, L.; TAN, H.; WANG, Z.; LI, J.; JIANG, Y. Influence of cooling rate on microstructure evolution and pitting corrosion resistance in the simulated heat-affected zone of 2304 duplex stainless steels. Corrosion Science, v. 58, p. 168–174. 2012.
[7] KRAUSS, G. Steels: Processing, Structure, and Performance. Ohio: ASM International, 2005. 614p.
[8] BHADESHIA, H.K.D.H.; HONEYCOMBE, R.W.K. Steels Microstructure and Properties. Third Edition. Cambridge: Butterworth-Heinemann, 2006. 344p.
[9] CHIAVERINI, V. Aços e ferros fundidos. 7ª edição. São Paulo: Associação brasileira de Metalurgia e Materiais, 2008. 599p.
[10] COSTA E SILVA, A. L. V. e MEI, P. R. Aços e suas ligas especiais.2ª edição. São Paulo: Blucher, 2006. 646p.
[11] DAVIS, J.R. ASM Specialty Handbook - Stainless Steels. Materials Park, OH: ASM International, 1994. 577p.
[12] Practical Guidelines for the Fabricacion of Duplex Stainless Steel. 2ª edição. Londres: International Molybdenum Association (IMOA), 2009. 63p.
78 [13] MUTHUPANDI, V.; SRINIVASAN, P. B.; SESHADRI, S. K.; SUNDARESAN, S. Effect of weld metal chemistry and heat input on the structure and properties of duplex stainless steel welds. Materials Science and Engineering A, v. 358, p. 9-16. 2003.
[14] MUTHUPANDI, V.; SRINIVASAN, P. B. Effect of nickel and nitrogen addition on the microstructure and mechanical properties of power beam processed duplex stainless steel (UNS 31803) weld metals. Materials Letters, v. 59, p. 2305-2309. 2005.
[15] GUO, Y.; SUN, T.; HU, J.; JIANG, Y.; JIANG, L.; LI, J. Microstructure evolution and pitting corrosion resistance of the Gleeble-simulated heat-affected zone of a newly developed lean duplex stainless steel 2002. Journal of Alloys and Compounds, v. 658, p. 1031-1040. 2016. [16] GUNN, R, N. Duplex Stainless Steels. Microstruture, properties and applications. Cambridge, England. Abington publishing, 2003. 204p.
[17] DOBRANSZKY, J.; SZABO, P. J.; BERECZ, T.; HORTKO, V.; PORTKO, M. Energy- dispersive spectroscopy and electron backscatter diffraction analysis of isothermally aged SAF 2205 type superduplex stainless steel. Spectrochim Acta B, v. 59, p. 1781-1788. 2004.
[18] HERTZMAN, S.; FERRIRA, P.J.; BROLUND, B. An experimental and theoretical study of heat-affected zone austenite reformation in three duplex stainless steels. Metallurgical and Materials Transactions A, v. 28, p. 277-285. 1997.
[19] GARZON, C. M.; RAMIREZ, A. J. Growth kinetics of secondary austenite in the welding microstructure of a UNS S32304 duplex stainless steel. Acta Materialia, v. 54, p. 3321-3331. 2006.
[20] LIOU, H. Y.; HSIEH, R. I.; TSAI, W. T. Microstructure and pitting corrosion in simulated heat-affected zones of duplex stainless steels. Materials Chemistry and Physics, v. 74, p. 33-42. 2002.
[21] LIOU, H. Y.; HSIEH, R. I.; TSAI, W. T. Microstructure and stress corrosion cracking in simulated heat-affected zones of duplex stainless steels. Corrosion Science, v. 44, p. 2841-2856. 2002.
[22] LIPPOLD, J. C; KOTECKI, D. J. ; Welding Metallurgy and Weldability of Stainless Steels. Hoboken, NJ: John Willey & Sons, 2005. 357p.
[23] NOVIKOV, I. Teoria Dos Tratamentos Térmicos Dos Metais, Rio de Janeiro: UFRJ, 1994. 550p.
[24] PORTER, D. A.; EASTERLING, K. E; SHERIF, M. Y. Phase Transformation in Metals and Alloys, Boca Raton: CRC Press, 2009. 520p.
79 [25] AARONSON, H. I.; SPANOS, G.; MASAMURA, R. A.; VARDIMAN, R. G.; MOON, D. W.; MENON, E. S. K.; HALL, M. G. Sympathetic nucleation: an overview. Materials Science & Engineering B, v. 32, p. 107-123. 1995.
[26] DE MONLEVADE, E. F. Estudo Das Transições Morfológicas na Decomposição aa Austenita Utilizando um Par de Difusão Fe-5%Ni/Fe-10%Ni, 2013. Tese. Universidade de São Paulo.
[27] DUBÉ, C. A., AARONSON, H. I.; MEHL, R. F. La formation de la ferrite proeutectoïde dans les aciers au carbone. Revue de Metalurgie, v. 55, p. 201-210, 1958.
[28] AARONSON, H. I. The proeutectoid ferrite and the proeutectoid cementite reactions. In: ZACKAY, V.; AARONSON, H. I. Decomposition of austenite by diffusional processes. New York, Interscience Publishers, 1962, p. 387-546.
[29] KRAL, M. V.; SPANOS, G. Three dimensional morphology of cementite precipitates. ScriptaMaterialia, v. 36, p. 875-882, 1997.
[30] KRAL, M. V.; SPANOS, G. Three dimensional analysis and classification of grain- boundary nucleated proeutectoid ferrite precipitates. Metallurgical and Materials Transactions A. v. 36A, p. 1209-1218, 2005.
[31] MAEHARA, Y; OHMORI, Y; MURAYAMA, J; FUJINO, N; KUNITAKE, T. Metal Science 17,1983. 541p.
[32] KULLMANN, J. H; Ph.D. Thesis, Institut fur Werkstoffkunde und Material prufung, TU Vienna, 1990.
[33] PERREN, R. A; SUTER, T.; SOLENTHALER, C; GULLO, G; UGGOWITZER, P. J; OHNI, H. B; SPEIDEL, M.O. Corrosion resistance of super duplex stainless steels in chloride ion containing environments: investigations by means of a new microelectrochemical method II. Infuence of precipitates. Corrosion Science, v. 43, p. 727-745. 2001.
[34] DE LACERDA, J. C.; CÂNDIDO, L. C.; GODEFROID, L. B. Corrosion behavior of UNS S31803 steel with changes in the volume fraction of ferrite and the presence of chromium nitride. Materials Science and Engineering A, v. 648, p. 428-435. 2015.
[35] RAMIREZ, A. J.; LIPPOLD, J. C.; BRANDI, S. D. The Relationship between Chromium Nitride and Secondary Austenite Precipitation in Duplex Stainless Steels. Metallurgical and Materials Transactions A, v. 34, p. 1575-1597. 2003.
80 [36] SIEURIN, H.; SANDSTROM, R. Austenite reformation in the heat-affected zone of duplex stainless steel. Materials Science & Engineering A, v. 418, p. 250-256. 2006.
[37] ASTM E3-01, Standard Practice for Preparation of Metallographic Specimens, ASTM
International, West Conshohocken, PA, 2001, www.astm.org.
[38] WESSMAN, S.; SELLEBY, M. Evaluation of austenite reformation in duplex stainless
steel weld metal using computational thermodynamics. Weld World, v. 58, p. 217–224. 2014.
[39] ATAMERT, S.; KING, J.E. Super duplex stainless steels - part 1 heat affected zone microstructures. Materials Science and Technology. v. 8, n. 10, p. 896-911, 1992.
[40] VAROL, I. Microstructure/Property Relationships in the Weld Heat Affected Zone of Duplex Stainless Steels. Columbus-Ohio, 1992, p. 261. Dissertation (Doctorate) - Department of Welding Engineering, The Ohio State University.
[41] BURKE, J. E.; TURNBULL, D. Recrystallization and Grain Growth. Progress in Metal Physics. 1952; 3:220-292. London: Pergamon Press.
[42] GARZON, C. M.; SERGIO, C. A. S.; BRANDI, D.; RAMIREZ, A. J. The relationship between atomic partitioning and corrosion resistance in the weld-heat affected zone microstructures of UNS S32304 duplex stainless steel. Journal of Materials Science, v. 42, p. 3321-3331. 2006.
[43] HERTZMAN, S.; ROBERTS, W.; LINDENMO, M. Microstructure and properties of nitrogenalloyed duplex stainless steel after welding treatments. In: Conference Duplex Stainless Steels’86, The Hauge-The Netherlands, 1986. Proceedings. The Netherlands, Nederlands Institut Voor Lastechniek, 1986, p. 257-267.
[44] GOOCH, T.G. Weldability of duplex ferritic-austenitic stainless steels. In: Conference
Duplex Stainless Steels’82, St. Louis-USA, 1982. Proceedings. Ohio, American Society
ofMetals, 1983, p. 573-602.
[45] VAROL, I.; LIPPOLD, J.C.; BAESLACK III, W.A. Welding of duplex stainless steels. Key Engineering Materials. v. 69-70, p. 217-252, 1992.
[46] CHARLES, J. Super duplex stainless steels: structure and properties. In: Conference
Duplex Stainless Steels’91, Beaune Bourcogne-France, 1991. Proceedings. France, 1991,
81 [47] OLSSON, J.; NORDIN, S. Applications and uses of duplex stainless steels. In: Conference
Duplex Stainless Steels’86, The Hauge-The Netherlands, 1986. Proceedings. The Netherlands,
Nederland’s Institut Voor Lastechniek, 1986, p. 219-225.
[48] SIMMONS, J.W. Overview: high-nitrogen alloying of stainless steels. Materials Science and Engineering A. v. A207, p. 159-169, 1996.
[49] KOMIZO, Y.; OGAWA, K.; AZUMA, S. HAZ embrittlement in high Cr-Mo duplex stainless steel and the effects of Ni and N. Welding International. v. 5, n. 4, p. 277-282, 1991. [50] CAO, H.L.; HERTZMAN, S. The relationship between impact properties and welding simulatedmicrostructures in three duplex stainless steels. In: Conference Duplex StainlessSteels’91, Beaune Bourcogne-France, 1991. Proceedings. France, 1991, p. 363-372. [51] LIPPOLD, J.C.; VAROL, I.; BAESLACK III, A. The influence of composition and microstructure on the HAZ toughness of duplex stainless steels at -20°C. Welding Journal. v. 73, n. 4, p. 75s-79s, 1994.
[52] ENJO, T.; KURODA, T.; IMANISHI, R. Microstructure and toughness in weld heat- affected zone of duplex stainless steel. Transactions of JWRI. v. 17, n. 2, p. 105-111, 1988. [53] TAN, H.; WANG, Z. Y.; JIANG, Y. M.; LI, J. Annealing temperature effect on the pitting corrosion resistance of plasma arc welded joints of duplex stainless steel UNS S32304 in 1.0 M NaCl. Corrosion Science, v. 53, p. 2191-2200. 2011.