Anisotropic Plasticity and Fracture of Three 6000-Series Aluminum Alloys

As part of enhancing the EU’s role in both civilian and military crisis management operations, the EU therefore elaborated on the CMCO concept as an internal measure for

The dense gas atmospheric dispersion model SLAB predicts a higher initial chlorine concentration using the instantaneous or short duration pool option, compared to evaporation from

Based on the above-mentioned tensions, a recommendation for further research is to examine whether young people who have participated in the TP influence their parents and peers in

Azzam’s own involvement in the Afghan cause illustrates the role of the in- ternational Muslim Brotherhood and the Muslim World League in the early mobilization. Azzam was a West

The failure strains of the Al-0.5Mg-0.4Si alloy in tempers T6x and T7 fit well to the trendline drawn for the AA6110, AA6063 and Al-0.5Mg-0.4Si alloys in temper T6, whereas the

Using tensile tests on smooth and V-notch axisymmetric specimens, in addition to Kahn tear tests, the influence of stress state on the plastic flow and fracture of three AlMgSi

Cauchy stress versus logarithmic strain in uniaxial tension from (a) representative tests in the rolling plane at 0°, 15°, 30°, 45°, 60°, 75° and 90° with respect to the

The ideas launched by the Beveridge Commission in 1942 set the pace for major reforms in post-war Britain, and inspired Norwegian welfare programmes as well, with gradual