• No results found

IPTC 11968 Comprehensive Mini-Frac Testing in the Gullfaks Field as a Tool for Characterization of Reservoir Structure and Rock Mechanics.

N/A
N/A
Protected

Academic year: 2022

Share "IPTC 11968 Comprehensive Mini-Frac Testing in the Gullfaks Field as a Tool for Characterization of Reservoir Structure and Rock Mechanics."

Copied!
18
0
0

Laster.... (Se fulltekst nå)

Fulltekst

Referanser

RELATERTE DOKUMENTER

11 and 12 - (a), (c), and (e), the maximum peel/shear stress of sinusoid joints at one end of the adhesive joint has become more than the value of peel stress for the flat joints, so

Results of the static undrained triaxial tests in compression are presented as shear stress (τ) and pore pressure (u) versus axial strain (ε a ), and as shear stress versus

Evolution of shear stress and friction coefficient versus shear displacement for Draupne DST15 (a,b) following the constant normal load procedure at three different shear

The ideas launched by the Beveridge Commission in 1942 set the pace for major reforms in post-war Britain, and inspired Norwegian welfare programmes as well, with gradual

This research has the following view on the three programmes: Libya had a clandestine nuclear weapons programme, without any ambitions for nuclear power; North Korea focused mainly on

The system can be implemented as follows: A web-service client runs on the user device, collecting sensor data from the device and input data from the user. The client compiles

gradient. Moreover Appendix D shows that the distances for the gradients in each point can be different depending on how steep the gradients in the [\ and 45 ° -direction are.

An abstract characterisation of reduction operators Intuitively a reduction operation, in the sense intended in the present paper, is an operation that can be applied to inter-