5. Bow-Tie Analysis of BOP
5.5. Conclusion of analysis
Com base nas técnicas empregadas e resultados obtidos nesse trabalho, podemos sugerir para trabalhos futuros:
Estudar a incorporação de outras fases ativas sobre materiais mesoporosos tipo MCM- 48 e SBA-15 e verificar a sua capacidade de adsorção de CO2;
Buscar um método de impregnação que melhore a dispersão do metal na superfície do material e/ou adição de um promotor que aumente a dispersão do metal no suporte; Avaliar o comportamento dos materiais MCM-48 e SBA-15 na reação de reforma seca
119
Alexsandra Rodrigues do Nascimento, Setembro/2014
Referências bibliográficas
ABDULLAH, Z. A.; RAZALI, N.; LEE, K. T. Optimization of mesoporous K/SBA-15 catalyzed transesterification of palm oil using response surface methodology. Journal Fuel
Processing Technology, v. 90, p. 958-964, 2009.
ALEXANDRIDS, P.; HATTON, A. Poly(ethylene oxide)-poly(propylene oxide)- poly(ethylene oxide) block copolymer surfactants in aqueous solutions and at interfaces thermodynamics, structure, dynamics and modeling. Colloids and Surfaces A.,
Physicochemical and Engineering Aspects, v. 96, p. 46, 1995.
ALONSO, M.; RODRIGUEZ, N.; GONZALEZ, B.; GRASA, G.; MURILLO, R.; ABANADES, J. C. Carbon dioxide capture from combustion flue gases with a calcium oxide chemical loop experimental results and process development. Int. J. Greenh. Gas Con., v. 4, 167–173, 2010.
ARONU, U. E.; SVENDSEN, H. F.; HOFF, K. A. Investigation of amine amino acid salts for carbon dioxide absorption. Int. J. Greenh. Gas Con., 2010.
ATKINS, P. W.; PAULA, J. Físico-química. 9. ed. Rio de Janeiro: LCT, 2013. V. 1.
AUVRAY, X.; PEPIPAS, C.; ANTHORE, R.; RICO, I.; LATTES, A. X-ray Study of mesophases of cetyltrimethylammonium bromide in water, formamide and glycerol, J. Phys. Chem., v. 93, p. 7458, 1989.
BANERJEE, R.; FURUKAWA, H.; BRITT, D.; KOBLER, C.; KEEFFE, M. O. O.; YAGHI, M. Control of pore size and functionality in isoreticular zeolitic imidazolate frameworks and their carbon dioxide selective capture properties. J. Am. Chem. Soc., v. 131, 3875–3877, 2009. BASTIN, L.; BARCIA, P. S.; HURTADO, E. J.; SILVA, J. A. C.; RODRIGUES, A. E.; CHEN, B. A. Microporous metal-organic framework for separation of CO2/N2 and CO2/CH4 by fixed-bed adsorption. J. Phys. Chem. C, v. 112, 1575–1581, 2008.
BECK, J. S.; VARTULI, J. C.; ROTH, W. J.; LEONOWICZ, M. E.; KRESGE, C. T.; SCHMITT, K. D.; CHU, C. T. W.; OLSON, D. H.; SHEPPARD, E. W.; MCCULLEN, S. B.;
120
Alexsandra Rodrigues do Nascimento, Setembro/2014
HIGGINS, Y. B.; SCHELENKER, I. L. A new family of mesoporous molecular-sieves prepared with liquid-crystal templates. J. Am. Chem.Soc., v. 114, p.10843, 1992.
BELMABKHOUT, Y.; SAYARI, A. Effect of pore expansion and amine functionalization of mesoporous silica on CO2 adsorption over a wide range of conditions. Adsorption, v. 15, p. 318–328, 2009.
BELMABKHOUT, Y.; SERNA-GUERRERO, R.; SAYARI, A. Adsorption of CO2 from dry
gases on MCM-41 silica at ambient temperature and high pressure. 1: pure carbon dioxide adsorption. Chemical Engineering Science, v. 64, p. 3721-3728, 2009.
BELMABKHOUT, Y.; SERNA-GUERRERO, R.; SAYARI, A. Adsorption of CO2-
containing gas mixtures over amine-bearing pore-expanded MCM-41 silica: application for CO2 separation. Adsorption, v. 17, p. 395–401, 2011.
BENSON, S. M.; ORR JR, F. M. Carbon dioxide capture and storage. Mater. Res. Soc. Bull., v. 33, p. 303-305, 2008.
BÉRUBÉ, F.; KALIAGUINE, S. Calcination and thermal degradation mechanisms of triblock copolymer template in SBA-15 materials. Microporous and Mesoporous Materials, v. 115, p. 469-479, 2008.
BHAGIYALAKSHMI, M.; LEE, J. Y.; JANG, H. T. Synthesis of mesoporous magnesium oxide: Its application to CO2 chemisorption. International Journal of Greenhouse Gas Control, v. 4, p. 51–56, 2010.
BHAGIYALAKSHMI, M.; HEMALATHA, P.; GANESH, M.; PENG, M. M.; JANG, H. T. Synthesis of copper exchanged heteropolyacids supported on MCM-48 and its application for CO2 adsorption. Journal of Industrial and Engineering Chemistry, v. 17, p. 628–632, 2011. BLAMEY, J.; ANTHONY, E. J.; WANG, J.; FENNELL, P. S. The calcium looping cycle for large-scale CO2 capture. Prog. Energ. Combust., v. 36, 260–279, 2010.
BOUNACEUR, R.; LAPE, N.; ROIZARD, D.; VALLIERES, C.; FAVRE, E. Membrane processes for post-combustion carbon dioxide capture: a parametric study. Energy, v. 31, 2556–2570, 2006.
121
Alexsandra Rodrigues do Nascimento, Setembro/2014
BRITT, D.; FURUKAWA, H.; WANG, H. B.; GLOVER, T. G.; YAGHI, O. M. Highly efficient separation of carbon dioxide by metal-organic framework replete with open metal sites. PNAS, v. 106, 20637–20640, 2009.
BROWN, T.; LEMAY, H. E.; BURSTEN, B. E. Química: a ciência central. 9 ed. Prentice- Hall, 2005.
BROYER, M.; VALANGE, S.; BELLAT, J. P.; BERTRAND, O.; WEBWE, G.; GABELICA, Z. Influence of aging, thermal, hydrothermal and mechanical treatments on the porosity of MCM-41 mesoporous silica. Lagmuir, v. 18, p. 5083-5091, 2002.
BRUNAUER, S.; EMMETT, P. H.; TELLER, E. Adsorption of gases in multimolecular layers. J. Am. Chem. Soc., v. 60, p. 309, 1938.
BRUNAUER, S. The Adsorption of Gases and Vapors, University Press, Oxford, 1945. BURDYNY, T.; STRUCHTRUP, H. Hybrid membrane/cryogenic separation of oxygen from air for use in the oxy-fuel process. Energy, v. 35, 1884–1897, 2010.
CALADO, V.; MONTGOMERY, D. C. Planejamento de experimentos usando statistica. Rio de Janeiro: E-papers serviços editoriais, 2003.
CASKEY, S. R.; WONG-FOY, A. G.; MATZGER, A. J. Dramatic tuning of carbon dioxide uptake via metal substitution in a coordination polymer with cylindrical pores. J. Am. Chem.
Soc., v. 130, 10870–10871, 2008.
CHEN, C.; AHN, W-S. CO2 capture using mesoporous alumina prepared by a sol–gel process. Chemical Engineering Journal, v. 166, 646–651, 2011.
CHEN, C.; PARK, D-W.; AHN, W-S. CO2 capture using zeolite 13X prepared from
bentonite, Applied Surface Science, v. 292, 63– 67, 2014.
CHEN, L. Y.; JAENICKE, S.; CHUAH, G. K. Microporous Mater., v. 12, p. 323, 1997. CHOWDHURY, F. A.; OKABE, H.; SHIMIZU, S.; ONODA, M.; FUJIOKA, Y. Development of novel tertiary amine absorbents for CO2 capture. Energy Procedia, v. 1, 1241–1248, 2009.
122
Alexsandra Rodrigues do Nascimento, Setembro/2014
CINKE, M.; LI, J.; BAUSHLICHER, C.W.; RICCA, A.; MEYYAPPAN, M. CO2 adsorption
in single walled carbon nanotubes. Chem. Phys. Lett., v. 376, 761–766, 2013.
CIOLA, R. Fundamentos da Catálise. Ed. da Universidade de São Paulo. São Paulo: Editora Moderna, 1981.
DARDE, V.; THOMSEN, K.; WELL, V. W. J. M.; STENBY, E. H. Chilled ammonia process for CO2 capture. Int. J. Greenh. Gas Con., v. 4, 131–136, 2010.
DAVAR, F.; FERESHTEH, Z.; SALAVATI-NIASARI, M. J. Alloys Compd., v. 476, p. 797, 2009.
DEDAVID, B. A.; GOMES, C. I.; MACHADO, G. Microscopia eletrônica de varredura: Aplicações e preparação de amostras: Materiais Poliméricos, metálicos e semicondutores. Porto Alegre: EDIPUCR S, 2007.
DOYLE, A.; HODNETT, B. K. Stability of MCM-48 in aqueous solution as a function of ph.
Microporous and Mesoporous Materials, v. 63, p. 53-57, 2003.
DRAGE, T. C.; SMITH, K. M.; PEVIDA, C.; ARENILLAS, A.; SNAPE, C. E. Development of adsorbent technologies for post-combustion CO2 capture. Energy Procedia, v. 1, 881–884, 2009.
FANG, F.; LI, Z. S.; CAI, N. S. CO2 capture from flue gases using a fluidized bed reactor with limestone. Korean J. Chem. Eng., v. 26, 1414–1421, 2009a.
FAVRE, E. Carbon dioxide recovery from post-combustion processes: can gas permeation membranes compete with absorption? J. Membr. Sci., v. 294, 50–59, 2007.
FIGUEIREDO, J. L.; RIBEIRO, F. R. Catálise Heterogênea. Lisboa: Fundação Calouste Gulbenkian, 1989.
FINSY, V.; MA, L.; ALAERT, L.; VOS, D. E.; BARON, C. V.; DENAYER, J. F. M.
Separation of CO2 mixtures with the MIL-53(Al) metal-organic framework,
123
Alexsandra Rodrigues do Nascimento, Setembro/2014
FREY, A. S.; HINRICHSEN, O. Comparison of differently synthesized Ni(Al)MCM-48 catalysts in the ethane to propene reaction. Microporous and Mesoporous Materials, v. 164, p. 164–171, 2012.
FUSCO, S.; BORZACCHIELLO, A.; NETTI, P. A. Perspectives on: PEO-PPO-PEO triblock copolymers and their biomedical applications interdisciplinary. Journal of Bioactive and
Compatible Polymers, v. 21, p. 149-163, 2006.
GIL, M.; TISCORNIA, I.; IGLESIA, Ó.; MALLADA, R.; SANTAMARÍA, J. Monoamine-
grafted MCM-48: An efficient material for CO2 removal at low partial pressures. Chemical Engineering Journal, v. 175, 291– 297, 2011.
HART, A.; GNANENDRAN, N. Cryogenic CO2 capture in natural gas. Energy Procedia, v.
1, 697–706, 2009.
HO, M. T.; ALLINSON, G. W.; WILEY, D. E. Reducing the cost of CO2 capture from flue
gases using membrane technology. Ind. Eng. Chem. Res., v. 47, 1562–1568, 2008a.
HO, S.; CHOU, T.C. The role of anion in the preparation of nickel catalyst detected by TPR and FT-IR spectra, Ind. Eng. Chem. Res., v. 34, p. 2279, 1995.
HOFFMANN, F.; CORNELIUS, M.; MORELL, J.; FROBA, M. Silica-based mesoporous
organic–inorganic hybrid materials. Angew. Makromol. Chem., v. 45, p. 3216, 2006.
HUANG, J.; ZOU, J.; HO, W. S. W. Carbon dioxide capture using a CO2-selective facilitated transport membrane. Ind. Eng. Chem. Res., v. 47, 1261–1267, 2008.
HUANG, L.; ZHANG, L.; SHAO, Q.; LU, L.; LU, X.; JIANG, S.; SHEN, W. Simulations of binary mixture adsorption of carbon dioxide and methane in carbon nanotubes: temperature, pressure, and pore size effects. J. Phys. Chem. C, v. 111, 11912–11920, 2007.
IGLESIAS, O. P. M.; MALLADA, R.; LINZ, Z.; ROCHA, J.; CORONAS, J.; SANTAMARIA, J. Synthesis and characterization of MCM-48 tubular membranes. Journal
124
Alexsandra Rodrigues do Nascimento, Setembro/2014
INTERNATIONAL ENERGY AGENCY. The Technology Roadmap, Carbon capture and
storage. France: 2013 edition.
JANG, D.; PARK, S-J. Influence of nickel oxide on carbon dioxide adsorption behaviors of activated carbons. Fuel, v. 102, p. 439–444, 2012.
JANG, H. T.; PARK, Y.; KO, Y. S.; LEE, J. Y.; MARGANDAN, B. Highly siliceous MCM- 48 from rice husk ash for CO2 adsorption. International Journal of Greenhouse Gas Control, v. 3, p. 545–549, 2009.
KALAVATHY, M. H.; KARTHIKEYAN, T.; RAJGOPAL, S.; MIRANDA, L. R. Kinetic and isotherm studies of Cu (II) adsorption onto H3PO4-activated rubber wood sawdust. Journal of Colloid and Interface Science, 2005.
KNUDSEN, J. N., JENSEN, J. N., VILHELMSEN, P. J., BIEDE, O. Experience with CO2
capture from coal flue gas in pilot-scale: testing of different amine solvents. Energy Procedia 1, 783–790, 2009.
KOZAK, F.; PETIG, A.; MORRIS, E.; RHUDY, R.; THIMSEN, D. Chilled ammonia process for CO2 capture. Enrgy Proced., v. 1, 1419–1426, 2009.
KRESGE, C. T., LEONOWICZ, M. E.; ROTH, W. J. Ordered mesoporous molecular sieves synthesized by a liquid-crystal template mechanism. Nature, v. 359, p. 710-712, 1992.
KRUK, M.; JARONIEC, M.; SAKAMOTO, Y.; RYOO, R.; KO, C. H. Determination of pore size and pore wall structure of mcm-41 by using nitrogen adsorption, transmission electron microscopy, and X-ray diffraction. Journal of Physical Chemistry B, v. 104, p. 292-301, 2000.
KRUK, M.; JARONIEC, M.; SHIN, H. J.; RYOO, R.; JOO, S. H. Optimization of silica/surfactant ratio in mcm-41 synthesis. Studies in Surfaces Science and Catalysis, v. 156, p. 55-62, 2005.
LARIBI, M. K.; BACHARI, R.; CHEBOUT, M. T. Synthesis, characterization and catalytic application of the nickel containing mesoporous silica. Journal of the Association of Arab
125
Alexsandra Rodrigues do Nascimento, Setembro/2014
LE QUÉRÉ, C.; MORIARTY, R.; ANDREW, R. M.; PETERS, G. P.; CIAIS, P.; FRIEDLINGSTEIN, P.; JONES, S. D.; SITCH, S.; TANS, P.; ARNETH, A.; BODEN, T. A.; BOPP, L.; BOZEC, Y.; CANADELL, J. G.; CHEVALLIER, F.; COSCA, C. E.; HARRIS, I.; HOPPEMA, M.; HOUGHTON, R. A.; HOUSE, J. I.; JAIN, A.; JOHANNESSEN, T.; KATO, E.; KEELING, R. F.; KITIDIS, V.; KLEIN GOLDEWIJK, K.; KOVEN, C.; LANDA, C. S.; LANDSCHÜTZER, P.; LENTON, A.; LIMA, I. D.; MARLAND, G.; MATHIS, J. T.; METZL, N.; NOJIRI, Y.; OLSEN, A.; ONO, T.; PETERS, W.; PFEIL, B.; POULTER, B.; RAUPACH, M. R.; REGNIER, P.; RÖDENBECK, C.; SAITO, S.; SALISBURY, J. E.; SCHUSTER, U.; SCHWINGER, J.; SÉFÉRIAN, R.; SEGSCHNEIDER, J.; STEINHOFF, T.; STOCKER, B. D.; SUTTON, A. J.; TAKAHASHI, T.; TILBROOK, B.; VAN DER WERF, G. R.; VIOVY, N.; WANG, Y. P.; WANNINKHOF, R.; WILTSHIRE, A.; ZENG, N. Global carbon budget, Earth Syst, 2014.
LEE, S.; MAKEN, S.; PARK, J. W.; SONG, H. J.; PARK, J. J.; SHIM, J. G.; KIM, J. H.; EUM, H. M.. A study on the carbon dioxide recovery from 2 ton-CO2/day pilot plant at LNG based power plant. Fuel 87, 1734–1739, 2008.
LEE, S-Y.; YOO, H-M.; PARK, S. W.; PARK, S. H.; OH, Y. S.; RHEE, K. Y.; PARK, S-J. Preparation and characterization of pitch-based nanoporous carbons for improving CO2 capture. Journal of Solid State Chemistry, v. 215, 201–205, 2014.
LI, B.; DUAN, Y.; LUEBKE, D.; MORREALE, B. Advances in CO2 capture technology: A
patent review. Applied Energy, v. 102, 1439–1447, 2013.
LI, Z. S.; CAI, N. S.; CROISET, E. Process analysis of CO2 capture from flue gas using carbonation/calcination cycles. AIChE J., v. 54, 1912–1925, 2008b
LINHARES, L. A.; EGREJA FILHO, F. B.; BELLIS, V. M.; SANTOS, E. A.; IANHEZ, R. Langmuir and Freundlich models applied to copper and zinc adsorption in Brazilian soils.
Revista Tecnológica, v. 17, p. 49-60, 2008.
LU, D. Y.; HUGHES, R. W.; ANTHONY, E. J. Ca-based sorbent looping combustion for CO2 capture in pilot-scale dual fluidized beds. Fuel Process. Technol., v. 89, 1386–1395, 2008.
LU, J.; ZHANG, H.; CHENG, M.; WANG, L. CO2 capture through membrane gas absorption
with aqueous solution of inorganic salts-amino acid salts. J. Fuel Chem. Technol., v. 37, 77– 81, 2009.
126
Alexsandra Rodrigues do Nascimento, Setembro/2014
LUZ JR, G. E.; MELO, A. C. R.; LIMA, S. H.; ARAUJO, A. S.; FERNADES JR, V. Desidratação de etanol sobre material nanoestruturado do tipo La-SBA-15. Quimica Nova 33, v. 8, p. 1646-1648, 2010.
MACARIO, A. K.; GIORDINO, G.; IUCOLANO, F.; CAPUTO, D. Synthesis of mesoporous materials for carbon dioxide sequestration. Microporous and Mesoporous Mater., v. 81, p. 139-147, 2005.
MAJCHROWICZ, M. E.; BRILMAN, D. W. F.; GROENEVELD, M. J. Precipitation regime for selected amino acid salts for CO2 capture from flue gases. Energy Procedia, v. 1, 979–984, 2009.
MANGALAPALLY, H. P.; NOTZ, R.; HOCH, S.; ASPRION, N.; SIEDER, G.; GARCIA, H.; HASSE, H. Pilot plant experimental studies of post combustion CO2 capture by reactive absorption with MEA and new solvents. Energy Procedia, v. 1, 963–970, 2009.
MANOVIC, V.; LU, D.; ANTHONY, E. J.; Steam hydration of sorbents from a dual fluidized bed CO2 looping cycle reactor. Fuel, v. 87, 3344–3352, 2008b.
MATHIAS, P. M.; REDDY, S.; O’CONNELL, J. P. Quantitative evaluation of the chilled-
ammonia process for CO2 capture using thermodynamic analysis and process simulation. Int. J. Greenh. Gas Con., v. 4, 174–179, 2010.
MELLO, M. R.; PHANON, D.; SILVEIRA, G. Q.; LLEWELLYN, P. L.; RONCONI, C. M. Amine-modified MCM-41 mesoporous silica for carbon dioxide capture. Microporous and
Mesoporous Materials, v. 143, p. 174–179, 2011.
MERKEL, T. C.; LIN, H.; WEI, X.; BAKER, R. Power plant post-combustion carbon dioxide capture: an opportunity for membranes. J. Membr. Sci., 2010.
MESHKANI, F.; REZAEI, M.; ANDACHE, M. Investigation of the catalytic performance of Ni/MgO catalysts in partial oxidation, dry reforming and combined reforming of methane. J.
127
Alexsandra Rodrigues do Nascimento, Setembro/2014
MONT EZ, M. K.; MOLINA, R.; MORENO, S. Nickel catalysts obtained from hydrotalcites by coprecipitation and urea hydrolysis for hydrogen Production. Int. J.
Hydrogen Energy, v. 39, p. 8225-8237, 2014.
NA, B. K.; KOO, I. K.; EUM, H. M.; LEE, H.; SONG, H. K. CO2 recovery from flue gas by
PSA process using activated carbon. Korean J. Chem. Eng., v. 18, 220–227, 2010.
NORTHROP, P. S.; VALENCIA, J. A. The CFZTM process: a cryogenic method for handling high-CO2 and H2S gas reserves and facilitating geosequestration of CO2 and acid gases. Energy Procedia, v. 1, 171–177, 2009.
OLAJIRE, A. A. CO2 capture and separation technologies for end-of-pipe applications – a review. Energy, v. 35, 2610–2628, 2010.
OLIVEIRA, T. G.; MACHADO, S. W. M.; SANTOS, S. C. G.; SOUZA, M. J. B.;
PEDROSA, A. M. G. Adsorção de CO2 em peneiras moleculares micro e mesoporosas. Quim.
Nova 37, v. 4, p. 610-617, 2014.
PARK, S-J.; LEE, S-Y. A study on hydrogen-storage behaviors of nickel-loaded mesoporous MCM-41. Journal of Colloid and Interface Science, v. 346, p. 194–198, 2010.
PARK, Y.; MOON, D-K.; KIM, Y-H.; AHN, H.; LEE, C-H. Adsorption isotherms of CO2,
CO, N2, CH4, Ar and H2 on activated carbon and zeolite LiX up to 1,0 MPa. Adsorption, v. 20, p. 631–647, 2014.
PERRY E CHILTON. Chemical Engineers Handbook. Rio de Janeiro: Ed. Guanabara dois S.A., 1980.
PFAFF, I.; KATHER, A. Comparative thermodynamic analysis and integration issues of CCS steam power plants based on oxy-combustion with cryogenic or membrane based air separation. Energy Procedia, v. 1, 495–502, 2009.
PHAN, A.; DOONAN, C. J.; URIBE-ROMO, F. J.; KNOBLER, C.; O’KEEFFE, M.;
YAGHI, O. M. Synthesis, structure, and carbon dioxide of zeolítica imidazolate frameworks.
128
Alexsandra Rodrigues do Nascimento, Setembro/2014
POWELL, C. E.; QIAO, G. G. Polymeric CO2/N2 gas separation membranes for the capture
of carbon dioxide from power plant flue gases. J. Membr. Sci., v. 279, 1–49, 2006.
RAO, A. B.; RUBIN, E. S.; KEITH, D.W.; MORGAN, M. G. Evaluation of potential cost reductions from improved amine-based CO2 capture systems. Energ Policy, v. 34, 3765– 3772, 2006.
RODRIGUES, M. I.; LEMMA, A. F. Planejamento de Experimentos e Otimização de
Processos: uma estratégia sequencial de planejamentos. Campinas, SP: Casa do Pão Editora,
2005.
SAYARI, A.; BELMABKHOUT, Y.; SERNA-GUERRERO, R. Flue Gas Treatment via CO2
Adsorption. Chem. Eng. J., v. 171, 760–774, 2011.
SCHOLES, C. A.; KENTISH, S. E.; STEVENS, G. W. The effect of condensable minor components on the gas separation performance of polymeric membranes for carbon dioxide capture. Energy Procedia, v. 1, 311–317, 2009.
SCHOLES, C. A.; STEVENS, G. W.; KENTISH, S. E. The effect of hydrogen sulfide, carbon monoxide and water on the performance of a PDMS membrane in carbon dioxide/nitrogen separation. J. Membr. Sci., v. 350, 189–199, 2010.
SELVAM, P.; DAPURKAR, S. E. Catalytic activity of highly ordered mesoporous VMCM- 48, Applied Catalysis A: General, v. 276, p. 257–265, 2004.
SHI, J-L.; HUA, Z-L.; ZHANG, L-X. Nanocomposites from ordered mesoporous materials. J.
Mater. Chem., v. 14, p. 795-806, 2004.
SILVERSTEIN, R. M.; BASSLER, G. C.; MORRILL, T .C. Spectrometric Identification of
Organic Compounds. New York: John Wiley, 1991.
SOUZA, M. J. B.; SILVA, A. O. S.; AQUINO, J. M. F. B.; FERNANDES JR, V. J.; ARAUJO, A. S. Thermal analysis applied to template removal from siliceous MCM-48 nanoporous material. Journal of Thermal Analysis and Calorimetry, v. 79, p. 493-497, 2005.
129
Alexsandra Rodrigues do Nascimento, Setembro/2014
SU, F.; LU, C.; CHEN, W.; BAI, H.; HWANG, J. F. Capture of CO2 from flue gas via multiwalled carbon nanotubes. Sci. Total Environ., v. 407, 3017–3023, 2009.
TUINIER, M. J.; ANNALAND, M.V.; KRAMER, G. J.; KUIPERS, J. A. M. Cryogenic CO2
capture using dynamically operated packed beds. Chem. Eng. Sci., v. 65, 114–119, 2010.
TURRO, N. J.; CHUNGT, C. J. Photolumininescent Probes for water solubile Pllymers Pressureand Temperatyure Effectson a Poly01 Surfactant. Macromolecules, v. 17, p. 2123- 2126, 1984.
VALENTI, G.; BONALUMI, D.; MACCHI, E. Energy and exergy analyses for the carbon capture with the Chilled Ammonia Process (CAP). Energy Procedia, v. 1, 1059–1066, 2009. VAN HOIST, J.; VERSTEEG, G. F.; BRILMAN, D. W. F.; HOGENDOORN, J. A. Kinetic study of CO2 with various amino acid salts in aqueous solution. Chem. Eng. Sci., v. 64, 59– 68, 2009.
VARTULI, J. C.; SCHMITT, K. D.; KRESGE, C. T.; ROTH, W. J.; LEONOWICZ, M. E.; MCCULLEN, S. B.; HELLRING, S. D.; BECK, J. S.; SCHLENKER, J. L.; WANG, X.; MA, X.; SONG, C.; LOCKE, D. R.; SIEFERT, S.; WINANS, R. E.; MÖLLMER, J.; LANGE, M.; MÖLLER, A.; GLÄSER, R. Molecular basket sorbents polyethylenimine–SBA-15 for CO2 capture from flue gas: Characterization and sorption properties. Microporous and
Mesoporous Materials, v. 169, p. 103–111, 2013.
WANG, J.; CHEN, H.; ZHOU, H.; LIU, X.; QIAO, W.; LONG, D.; LING, L. Carbon dioxide capture using polyethylenimine-loaded mesoporous carbons. Journal of Environmental
Sciences, v. 25(1), 124–132, 2013.
WOJCIESZAK, R.; MONTEVERDI, S.; MERCY, M.; NOWAK, I.; ZIOLEK, M.; BETTAHAR, M. M. Nickel containing MCM-41 and AlMCM-41 mesoporous molecular sieves Characteristics and activity in the hydrogenation of benzene. Applied Catalysis A:
130
Alexsandra Rodrigues do Nascimento, Setembro/2014
YAN, X.; KOMARNENI, S.; YAN, Z. CO2 adsorption on Santa Barbara Amorphous-15
(SBA-15) and amine-modified Santa Barbara Amorphous-15 (SBA-15) with and without controlled microporosity. Journal of Colloid and Interface Science, v. 390, 217–224, 2013.
YANG, Q.; XUE, C.; ZHONG, C.; CHEN, J. F. Molecular simulation of separation of CO2
from flue gas in Cu-BTC metal-organic framework. AIChE J., v. 53, 2832–2840, 2007.
YANG, Y.; ZHAI, R.; DUAN, L.; KAVOSH, M.; PATCHIGOLLA, K.; OAKEY, J. Integration and evaluation of a power plant with a CaO-based CO2 capture system. Int. J. Greenh. Gas Con., v. 4, 603–612, 2010b.
YAZAYDIN, A. O.; SNURR, R. Q.; PARK, T. H.; KOH, K.; LIU, J.; VAN, M. D. L.; BENIN, A. I.; JAKUBCZAK, P.; LANUZA, M.; GALLOWAY, D. B.; LOW, J. J.; WILLIS, R. R. Screening of metal-organic frameworks for carbon dioxide capture from flue gas using a combined experimental and modeling approach. J. Am. Chem. Soc., v. 131, 18198–18199, 2009.
YI, H.; LI, F.; NING, P.; TANG, X.; PENG, J.; LI, Y.; DENG, H. Adsorption separation of CO2, CH4, and N2 on microwave activated carbon. Chemical Engineering Journal, v. 215– 216, 635–642, 2013.
YUE, M. B.; SUN, L. B.; CAO, Y.; WANG, Z. J.; WANG, Y.; YU, Q.; ZHU, J. H. Promoting the CO2 adsorption in the amine-containing SBA-15 by hydroxyl group. Microporous and Mesoporous Materials, v. 114, 74–81, 2008.
ZHAO, D.; FENG, J.; HUO, Q.; MELOSH, N.; FREDRICKSON, G. H.; CHMELKA, B. F.; STUCKY, G. D. Triblock Copolymer Syntheses of Mesoporous Silica with Periodic 50 to 300 Angstrom Pores. Science, v. 279, p. 548, 1998.
ZHAO, D.; HUO, Q. M.; FENG, J.; CHMELKA, B. F.; STUCKY, G. D. Nonionic Triblock and star diblock copolymer and oligomeric surfactant syntheses of highly ordered hydrothermally stable mesoporous silica structures. J. Am. Chem. Soc., v. 120, p. 6024-6036, 1998a.
131
Alexsandra Rodrigues do Nascimento, Setembro/2014
ZHAO, L.; RIENSCHE, E.; MENZER, R.; BLUM, L.; STOLTEN, D. A parametric study of CO2/N2 gas separation membrane processes for post-combustion capture. J. Membr. Sci., v. 325, 284–294, 2008.
ZUKAL, A.; AREAN, C. O.; DELGADO, M. R.; NACHTIGALL, P.; PULIDO, A.; MAYEROVÁ, J.; CEJKA, J. Combined volumetric, infrared spectroscopic and theoretical investigation of CO2 adsorption on Na-A zeólita. Microporous and Mesoporous Materials, v. 146, p. 97–105, 2011.
ZUKAL, A.; PASTVA, J.; CEJKA, J. MgO-modified mesoporous silicas impregnated by potassium carbonate for carbon dioxide adsorption. Microporous and Mesoporous Materials, v. 167, p. 44–50, 2013.
ZUKAL, A.; PAWLESA, J.; CEJKA, J. Isosteric heats of adsorption of carbon dioxide on zeolite MCM-22 modified by alkali metal cations. Adsorption, v. 15, 264–270, 2009.