The multi-needle Langmuir probe system on board NorSat-1

These results provide strong evidence that direct RBF methods can be used to accurately infer densities from experimental data, given that the models are trained using

There had been an innovative report prepared by Lord Dawson in 1920 for the Minister of Health’s Consultative Council on Medical and Allied Services, in which he used his

[2012] revisited the spacecraft potential technique and used calibrated Cluster data combined with measurements of solar irradiance to calculate more accurate cold plasma density

As former multi-ethnic major empires collapsed and new states emerged, the power balance and spheres of influence in the Middle East were also completely overturned (San Remo

A survey of the ICI-2 electron density and electric field data: (a) electron density measure- ments from the 4-needle ICI-2 Langmuir probe versus time of flight, (b) a

When using visual servoing with a 3D probe, the needle tracking problem is solved first and then the probe is controlled based on the estimated needle position.. In our application

It is possible to get either raw data (21 current measurements from each of the 4 probes) or the processed data (81 electron density and 8 spacecraft floating potential values) from

Instead of sweeping the bias voltage, the m-NLP design (Jacobsen et al. 2010) uses several cylindrical probes biased at different fixed voltages within the electron saturation