UNIS HSE documentation Version nr.: 3 Introduced date: 01.03.2012 Revision nr: 3 Revision date:09.01.2017 Document type: STANDARD OPERATING PROCEDURE - SOP
Made by: Lab leader Document code: SOP-template
Approved by: HMS direktør Page 1
Please fill in the following points as regarding your procedure
Standard Operating Procedures: name at the procedure
Principle Investigarot: your name
1. SAFETY
General laboratory safety applies.
Users must read and sign the Safety instructions for lab work at UNIS, including the following risk assessment. If the risk assessment is not complete, please report to lab leader or the person responsible for the lab.
Users must have had the necessary training before starting lab work.
Lab and scientific employees will lead the training of new employees/students including risk assessment for working alone at the lab.
Users must fill out the HSE documentations for lab work and do an agreement about using working alone alarm.
Users must read and understand safety datasheets for all chemical and solvents used, know how to use the fumehood, and familiarize themselves with the waste handling procedures at UNIS.
2. RESPONSIBILITIES
Lab leader at UNIS is responsible for making sure that people are using this procedure are qualified and have been through the necessary safety training. The users are responsible for following this SOP.
3. INTRODUCTION
4. PRINCIPLE
5. EQUIPMENT
Version: Page:
6. CHEMICAL - MATERIAL– SOLUTIONS- SOLVENT Product
index
CHEMICAL Supplier/Firm Quantity
7. SUBSTITUTE – is there an less hazardous alternative chemical/materials/solvent? Hasan alternative been considered? The selection of chemicals must be justified here.
8. PREPARATION
9. PROTOCOL/PROCEDURE
Version: Page:
Job safety analysis:
Subtask Undesirable episode Preventive measure 1
2 3 4 5
6 7 8 9
10 11
10. REFERENCES
Safety datasheets for chemicals and solvents.
Safety instructions for labwork at UNIS HSE documentation for lab work-
11. ATTAHCMENT
Risk assessment chemical health hazards
Version: Page:
