2.3 Scattering mechanisms
2.3.3 Volume scattering
De forma a da continuidade os trabalhos coma a fibra de licuri, algumas propostas de trabalhos podem ser sugeridas para trabalhos futuros.
a) Estudo de novas metodologias de tratamento sustentáveis e que não sejam demasiadamente custosas.
b) Estudos de outras geometrias de corpos de prova que façam com que os resultados se aproximem mais da realidade prática.
c) Estudo sobre a capacidade de isolamento térmico e acústico dos compósitos.
d) Estudos de envelhecimento acelerado dos compósitos e das fibras.
e) Estudos de envelhecimento natural de longo prazo.
f) Estudo de novas técnicas de moldagem de forma a poder aumentar o teor de fibra nos compósitos.
REFERÊNCIAS
ACKER, A. P e ULM, B. F. J. Creep and shrinkage of concrete: physical origins and practical measurements. Nuclear Engineering and Design, Vol. 203, pp.143 – 158, 2001.
AGOPYAN, V., SAVASTANO JR., H, JOHN, V. M., CINCOTTO, M. A. Developments on vegetable fibre–cement based materials in São Paulo, Brazil: an overview. Cement and Concrete Composites Vol. 27: 527 – 536, Philadelphia, 2005.
AMBROISE, J., MAXIMILIEN, S., PERA, J. Properties of Metakaolin Blended Cements. Advn Cem Bas Mat, Vol. 1, pp.161-168, 1994.
AMERICAN SOCIETY FOR TESTING AND MATERIALS. ASTM C 1609/C1609M. Standard Test Method for Flexural Performance of Fiber-Reinforced Concrete (Using Beam With Third-Point Loading) Philadelphia, 2010.
AMERICAN SOCIETY FOR TESTING AND MATERIALS. ASTM C157/C157M. Length Change of Hardened Hydraulic-Cement Mortar and Concrete. Philadelphia, 2008.
AMERICAN SOCIETY FOR TESTING AND MATERIALS. ASTM C618: Standard Specification for Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use in Concrete. Philadelphia, 2012.
AMERICAN SOCIETY FOR TESTING AND MATERIALS. C1.581/C1.581M. Determining Age at Cracking and Induced Tensile Stress Characteristics of Mortar and Concrete under Restrained Shrinkage. Philadelphia, 2009.
AMERICAN SOCIETY FOR TESTING AND MATERIALS. C580. Standard Test Method for Flexural Strength and Modulus of Elasticity of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes. Philadelphia, 2008.
ASSOCIAÇÃO BRASILEIRA DE NORMAS TÉCNICAS NBR 11.578, - Cimento Portland composto — Especificação. Rio de Janeiro, 1997.
ASSOCIAÇÃO BRASILEIRA DE NORMAS TÉCNICAS NBR 11.579, - Cimento Portland composto — Determinação do índice de finura por meio da peneira 75 µm (nº 200). Rio de Janeiro, 2012.
ASSOCIAÇÃO BRASILEIRA DE NORMAS TÉCNICAS NBR 11.582, - Cimento Portland — Determinação da expansibilidade Le Chatelier, Rio de Janeiro, 2012.
ASSOCIAÇÃO BRASILEIRA DE NORMAS TÉCNICAS NBR 12.653. Materiais pozolânicos — Requisitos. Rio de Janeiro, 2012.
ASSOCIAÇÃO BRASILEIRA DE NORMAS TÉCNICAS NBR 13.280. Argamassa para assentamento e revestimento de paredes e tetos - Determinação
da densidade de massa aparente no estado endurecido – Método de ensaio. Rio de Janeiro, 2005.
ASSOCIAÇÃO BRASILEIRA DE NORMAS TÉCNICAS NBR
15.261.Determinação da variação dimensional (retratação ou expansão linear). Rio de Janeiro, 2005.
ASSOCIAÇÃO BRASILEIRA DE NORMAS TÉCNICAS NBR 15.630. Argamassas pra revestimento de paredes e tetos: Determinação do módulo de elasticidade dinâmico através da propagação de onda ultrassônica. Rio de Janeiro, 2009.
ASSOCIAÇÃO BRASILEIRA DE NORMAS TÉCNICAS NBR 7.215. Cimento Portland – determinação da resistência à compressão. Rio de Janeiro, 1997
ASSOCIAÇÃO BRASILEIRA DE NORMAS TÉCNICAS NBR 7.251. Agregado em estado solto - Determinação da massa unitária – Método de ensaio. Rio de Janeiro, 1982.
ASSOCIAÇÃO BRASILEIRA DE NORMAS TÉCNICAS NBR 9.779. Argamassas e concretos endurecidos – determinação da absorção de água por capilaridade. Rio de Janeiro, 1995.
ASSOCIAÇÃO BRASILEIRA DE NORMAS TÉCNICAS NBR NM 11 - Cimento Portland - Análise química - Determinação de óxidos principais por complexometria Parte 2: Método ABNT, Rio de Janeiro, 2012.
ASSOCIAÇÃO BRASILEIRA DE NORMAS TÉCNICAS NBR NM 13 - Cimento Portland - Análise química - Determinação de óxido de cálcio livre pelo etileno glicol. Rio de Janeiro, 2012.
ASSOCIAÇÃO BRASILEIRA DE NORMAS TÉCNICAS NBR NM 15 - Cimento Portland - Análise química - Determinação de resíduo insolúvel. Rio de Janeiro, 2012.
ASSOCIAÇÃO BRASILEIRA DE NORMAS TÉCNICAS NBR NM 16 - .Cimento Portland - Análise química - Determinação de anidrido sulfúrico. Rio de Janeiro, 2012.
ASSOCIAÇÃO BRASILEIRA DE NORMAS TÉCNICAS NBR NM 17 - Cimento Portland - Cimento Portland - Análise química - Método de arbitragem para a determinação de óxido de sódio e óxido de potássio por fotometria de chama. Rio de Janeiro, 2012.
ASSOCIAÇÃO BRASILEIRA DE NORMAS TÉCNICAS NBR NM 18 - Cimento Portland - Análise química - Determinação de perda ao fogo, Rio de Janeiro, 2012.
ASSOCIAÇÃO BRASILEIRA DE NORMAS TÉCNICAS NBR NM 43 - Cimento portland - Determinação da pasta de consistência normal, Rio de Janeiro, 2003.
ASSOCIAÇÃO BRASILEIRA DE NORMAS TÉCNICAS NBR NM 65 - Cimento Portland - Determinação do tempo de pega. Rio de Janeiro, 2003.
ASSOCIAÇÃO BRASILEIRA DE NORMAS TÉCNICAS NBR NM 76 - Cimento Portland - Determinação da finura pelo método de permeabilidade ao ar (Método de Blaine) . Rio de Janeiro, 1998.
ASSOCIAÇÃO BRASILEIRA DE NORMAS TÉCNICAS. NBR 13.276. Argamassa para assentamento de paredes e revestimento de paredes e tetos – Determinação do teor de água para obtenção do índice de consistência padrão, Rio de Janeiro. 2005.
ASSOCIAÇÃO BRASILEIRA DE NORMAS TÉCNICAS. NBR 5.642. Telha de fibrocimento - Verificação da impermeabilidade. Rio de Janeiro, 1993.
ASSOCIAÇÃO BRASILEIRA DE NORMAS TÉCNICAS. NBR 5.738. Concreto – Procedimento para moldagem e cura de corpos-de-prova. Rio de Janeiro, 2008.
ASSOCIAÇÃO BRASILEIRA DE NORMAS TÉCNICAS. NBR 5.739. Concreto – Ensaio de compressão de corpos-de-prova cilíndricos. Rio de Janeiro, 2007.
ASSOCIAÇÃO BRASILEIRA DE NORMAS TÉCNICAS. NBR 7.211. Agregados para concreto - especificações. Rio de Janeiro, 2005.
ASSOCIAÇÃO BRASILEIRA DE NORMAS TÉCNICAS. NBR NM 248. Agregados – Determinação da Composição Granulométrica. Rio de Janeiro, 2003.
ASSOCIAÇÃO BRASILEIRA DE NORMAS TÉCNICAS. NBR NM 27. Agregados - Redução da amostra de campo para ensaios de laboratório. Rio de Janeiro, 2001.
ASSOCIAÇÃO BRASILEIRA DE NORMAS TÉCNICAS. NBR NM 52. Agregado miúdo - Determinação da massa específica e da massa específica aparente. Rio de Janeiro, 2002.
BANTHIA, N. e GUPTA, R. Influence of polypropylene fiber geometry on plastic shrinkage cracking in concrete. Cement and Concrete Research, Vol. 36, pp.1263 – 1267, 2006.
BARATA, M. S. e ANGÉLICA, R. S. Atividade pozolânica dos resíduos cauliníticos das indústrias de mineração de caulim da Amazônia. Revista Matéria, Vol. 16, n. 3, pp. 795 – 810, 2011.
BARR, B., GETTU, R., AL-ORAIMI, S. K. A., BRYARS, L. S. Toughness Measurement - the Need to Think Again. Cement and Concrete Composites, Vol. 18, pp. 281 - 297, 1996.
BENTUR, A. Introduction: overview of early age cracking. In: Fiber Reinforced Concretes, RILEM TC 181-EAS: Final Report, Edited by Bentur, A., pp.307 – 314, 2003b.
BENTUR, A., introduction: overview of early age cracking. In: Early Age Cracking in Cementitious Systems, RILEM TC 181 - EAS: Final Report, Edited by Bentur, A., pp.27 – 36, 2003.
BEZERRA, E. M., JOAQUIM, A. P., SAVASTANO JR., H. JOHN, V. M. The effect of different mineral additions and synthetic fiber contents on properties of cement based composites. Cement and Concrete Composites, Vol. 28, pp. 555 – 563, 2006.
BISSONNETTE, B., PIERRE, P., PIGEON, M. Influence of key parameters on drying shrinkage of cementitious materials. Cement and Concrete Research, Vol. 29, pp. 1655 – 1662, 1999.
BLEDZKI, A. K. e GASSAN, J. Composites reinforced with cellulose based fibres. Progress in Polymer Science. Vol. 24, pp. 221 – 274, 1999.
BOGHOSSIAN E. A. e WEGNER, L. D. Use of flax fibres to reduce plastic shrinkage cracking in concrete. Cement and Concrete Composites, Vol. 30 p. 929 – 937, 2008.
CABRERA, J. G e NWAUBANI, S. O. Experimental Methods for the Preparation of Palm Fruit and other Natural Fibres for Use in Reinforced Cement Composites. In: Sobral H. S., editor. Proceedings 2nd International Symposium on Vegetable Plants and Their Fibres as Building Materials London: Chapman and Hall; p. 334 – 42 (RILEM Proceedings, 7), 1990.
CANOVAS, Hormigon, Colegio de Ingenieros de Caminos, Canales y Puertos, Servicio de Publicaciones,663 p., 2004.
CARNEIRO, B. S., ANGÉLICA, R. S. SCHELLER, T., CASTRO, E. A. S., NEVES, R. F. Caracterização mineralógica e geoquímica e estudo das transformações de fase do caulim duro da região do Rio Capim, Pará. Cerâmica, Vol. 49, pp. 237 - 244, 2003.
CHEN, J. J., THOMAS, J. J., JENNINGS, H. M. Decalcification shrinkage of cement paste. Cement and Concrete Research, Vol. 36 pp. 801 – 809, 2006.
CINCOTTO, M. A., AGOPYAN V., JOHN V. M. Optimization of rice husk ash production. In: Sobral HS, editor. Proceedings 2nd International Symposium on Vegetable Plants and Their Fibres as Building Materials London: Chapman and Hall; p. 334–42 (RILEM Proceedings, 7), 1990.
COHEN, M. D., OLEK, J., DOLCH, W. L. Mechanism of Plastic Shrinkage Cracking in Portland Cement and Portland Cement - Silica Fume Paste and Mortar. Cement and Concrete Research. Vol. 20, pp. I03 - I19, 1990.
CREPALDI, I. C., MURADIAN, L. B. A., RIOS, M. D. G., PENTEADO, M. V. C., SALATINO, A. Composição nutricional do fruto de licuri (syagrus coronata (Martius) Beccari). Revista Brasil. Bot., São Paulo, Vol. 24, n. 2, pp.155 - 159, jun. 2001.
D’ALMEIDA, J. R. M., AQUINO, R. C. M. P., MONTEIRO, S. N. Tensile mechanical properties, morphological aspects and chemical characterization of piassava (Attalea funifera) fibers. Composites: Part A Vol. 37, pp. 1473 – 1479, 2006. DAVIES, P., MORVAN, C., SIRE, O., BALEY, C. Structure and properties of fibres from sea-grass (Zostera marina). J. Mater Sci. Vol. 42, pp. 4850 – 4857, 2007.
DRUMOND, M. A. Licuri syagrus coronata (Mart.) Becc. EMBRAPA - Empresa Brasileira de Pesquisa Agropecuária - Embrapa Semi-Árido. Documentos. 2007.
ELENGA, R. G., DIRRAS, G. F., MANIONGUI, G. J., DJEMIA, P., BIGET, M. P. On the microstructure and physical properties of untreated raffia textilis fiber. Composites: Part A Vol. 40, pp. 418 – 422, 2009.
FABBRI, B., GUALTIERI, S., LEONARDI, C. Modifications induced by the thermal treatment of kaolin and determination of reactivity of metakaolin. Applied Clay Science, Vol. 73, pp. 2 – 10, 2013.
FARIAS FILHO, J., TOLEDO FILHO, R. D., LIMA, P. R. L. Efeito da argila calcinada sobre a durabilidade de argamassas reforçadas com fibras curtas de sisal. Revista Brasileira de Engenharia Agrícola e Ambiental Vol. 14, n.10, pp.1109 – 1114, 2010.
GARCÉS, P., PÉREZ C. M., GARCÍA-ALCOCEL, E., PAYÁ, J., MONZÓ, J., BORRACHERO, M. V. Mechanical and physical properties of cement blended with sewage sludge ash. Waste Management, Vol. 28, p. 2495 – 2502, 2008.
GHAVAMI, K., TOLEDO FILHO, R. D., BARBOSA. P. N. Behaviour of Composite Soil Reinforced with Natural Fibres. Cement and Concrete Composites, Vol. 21, pp. 39 - 48, 1999.
HOLT, E. Contribution of mixture design to chemical and autogenous shrinkage of concrete at early ages. Cement and Concrete Research, Vol. 35, pp. 464 – 472, 2005.
HOSSAIN, A. B., and WEISS, J. The role of specimen geometry and boundary conditions on stress development and cracking in the restrained ring test. Cement and Concrete Research Vol. 36: 189 – 199, 2006.
HOSSAIN, A. B., WEISS. J. Assessing residual stress development and stress relaxation in restrained concrete ring specimens. Cement and Concrete Composites, Vol. 26, pp. 531 – 540, 2004.
HOSSEINPOURPIA, R., VARSHOEE, A., SOLTANI, M., HOSSEINI, P., TABARI, Z. H. Production of waste bio-fiber cement-based composites reinforced with nano-SiO2 particles as a substitute for asbestos cement composites. Construction and Building Materials, Vol. 31, pp.105 – 111, 2012.
HUA, C., ACKER, P., EHRLACHER, A. Analyses and models of the autogenous shrinkage of hardening cement paste. Cement and Concrete Research, Vol. 25. No. 7, pp. 1457 - 1468,1995.
HULL, D. e CLYNE, T. W. An introduction to composite materials. 2a ed. New York, Cambridge University Press, 326p. 1996.
JOHN, V. M., CINCOTTO, M. A., SJOSTROM, C., AGOPYAN, V., OLIVEIRA, C. T. A. Durability of slag mortar reinforced with coconut fibre. Cement and Concrete Composites Vol. 27, pp. 565 – 574, 2005.
JOHNSTON, C. D. Effects on Flexural Performance of Sawing Plain Concrete and of Sawing and Other Methods of Altering the Degree of Fiber Alignment in Fiber- Reinforced Concrete. Concrete, and Aggregates, CCAGDP, Vol. 11, No. 1, pp. 23 - 29, 1989.
JUAREZ, C., DURAN, A., VALDEZ P., FAJARDO, G. Performance of ‘‘Agave
lecheguilla’’ natural fiber in Portland cement composites exposed to severe
environment conditions. Building and Environment, Vol. 42, pp. 1151 – 1157, 2007. KAKALI, G., PERRAKI, T., TSIVILIS, S., BADOGIANNIS, E. Thermal treatment of kaolin: the effect of mineralogy on the pozzolanic activity. Applied Clay Science, Vol. 20, pp. 73 – 80, 2001.
KAWABATA, C. Y., COUTINHO, J. S., SAVASTANO JUNIOR, H. Caracterização de Cinzas de Resíduos Agroindustriais. In: Encontro Nacional sobre Aproveitamento de Resíduos na Construção, ENARC2009, Anais A1-006, ANTAC, Feira de Santana, Brasil, 2009.
KAWASHIMA, S. e SHAH, S. Early-age autogenous and drying shrinkage behavior of cellulose fiber-reinforced cementitious materials. Cement and Concrete Composites, Vol. 33, pp. 201 – 208, 2011.
KIM, J. K. e MAI, Y. M. Engineered Interfaces in Fiber Reinforced Composites. 1a ed. Oxford, Elsevier, 1998.
LEÃO, M. A. Fibras de Licuri: Um reforço vegetal alternativo de compostos poliméricos. Dissertação de mestrado, Universidade federal do rio grande do Norte, Natal, Rio Grandedo Norte, 2008.
LIM, J. W., KOH, D., KHIM, J. S. G., LE, G . V., TAKAHASHI, K. Presventive measures to eliminate asbestos-related diseases in Singapore. Safety and Health at Work, Vol. 2, No. 3, 2011.
LIMA, P. R. L. e TOLEDO FILHO, R. D. Uso de metacaulinita para incremento da durabilidade de compósitos à base de cimento reforçados com fibras de sisal. Ambiente Construído, Porto Alegre, Vol. 8, n. 4, pp. 7 - 19, out./dez. 2008.
MATHEWS, F. L. e RAWLINGS, R. D. Composite Materials: Engineering and Science. 1a ed. London, Chapman and Hall, 470 p., 1994.
MEHTA, P. K. e AÏTCIN, P. C. Principles Underlying Production of High- Performance Concrete. Cement, Concrete and Aggregates, CCAGDP, Vol. 12, No. 2, pp. 70 - 78, 1990.
MEHTA, P. K. e MONTEIRO, P. J. M. Concreto: Estrutura, Propriedades e Materiais. IBRACON, São Paulo, 674 pp., 2004.
MIN - Ministério da Integração Nacional. Cartilha - Nova delimitação do semiárido brasileiro. Brasília. 2005.
MITCHELL, B. S. An Introduction to Materials Engineering and Science
for Chemical and Materials Engineers. 2a ed. New Jersey, John Wiley & Sons, Inc., Publication, 968 p. 2004.
MUHUA, T., JINPING, L., KERU, W. The toughness of nylon fibre mats
Laminated mdf cement composites. Cement and Concrete Research, Vol. 24, No. 6, pp. 1185 - 1190, 1994.
NEVILLE, A. M. Propriedades do concreto. 2ª ed. Editora Pini, São Paulo, 8728 p. 1997.
NUNES, N. L. e AGOPYAN, V. Influência do fator de forma da fibra na tenacidade a flexão e tenacidade em concretos reforçados com fibras de aço. Boletin Técnico, série BT/PCC, n. 225, Escola Politécnica da Universidade de São Paulo, São Paulo, 1998.
OLIVEIRA, A. M. R. S. Caracterização da fibra do licuri (syagrus coronata (martius) beccari) Para aplicações na construção civil. Dissertação de mestrado, Escola Politécnica da Universidade federal da Bahia, Salvador, Bahia, 2010.
PEÑA, N. R. G. Estudo da fissuração associada à retração em argamassas para reparo em estruturas de concreto. Dissertação de mestrado, Universidade de São Paulo, São Paulo, 107 p., 2006.
PERSSON, B. Eight-year exploration of shrinkage in high-performance concrete. Cement and Concrete Research, Vol. 32, pp. 1229 – 1237, 2002.
PERSSON, B. Self-desiccation and its importance in concrete technology. Materials and Structures, Vol. 30, pp. 293 - 305, June 1997.
RAMAKRISHNA, G., SUNDARARAJAN, T. Studies on the durability of natural fibres and the effect of corroded fibres on the strength of mortar. Cement and Concrete Composites, Vol. 27, pp. 575 – 582, 2005.
RILEM TC 162-TDF. Test and design methods for steel fibre reinforced concrete. Materials and Structures, Vol. 33, , pp 3 - 5, 2000.
ROY, A. CHAKRABORTY, S., KUNDU, S. P., BASAK,R. K., MAJUMDER, S. B. ADHIKARI, B. Improvement in mechanical properties of jute fibres through mild
alkali treatment as demonstrated by utilisation of the Weibull distribution model. Bioresource Technology, Vol. 107, pp. 222 – 228, 2012.
SABIR, B. B., WILD, S., BAI, J. Metakaolin and calcined clays as pozzolans for concrete: a review. Cemente and Concrete Composites. Vol. 23, pp. 441 – 454, 2001.
SAHA, P., MANNA, S., CHOWDHURY, S. R., SEN, R., ROY D., ADHIKARI, B. Enhancement of tensile strength of lignocellulosic jute fibers by alkali-steam treatment. Bioresource Technology, Vol. 101, pp. 3182 – 3187, 2010.
SALES, A. T. C. Retração, fluência e fratura em compósitos cimentícios reforçados com polpa de bambu. Tese de doutorado, Pontifícia Universidade Católica do Rio de Janeiro, Rio de Janeiro, 2006.
SANJUAN, M. A., TOLEDO FILHO, R. D. Effectiveness of crack control at early age on the Corrosion of steel bars in low modulus sisal and coconut Fibre- reinforced mortars. Cement and Concrete Research, Vol. 28, No 4, pp. 1597 – 1604, 1998.
SAVASTANO JR. H. e SANTOS, S. F. Introdução in: ISAIA, G. C. (org) Materiais de construção civil e princípios de ciência e engenharia dos materiais. São Paulo: IBRACON, 2010.
SAVASTANO JR., H. e AGOPYAN, V. Transition zone studies of vegetable fibre-cement paste composites. Cement and Concrete Composites. Vol. 21, pp. 49 - 57, 1999.
SAVASTANO JR., H., SANTOS, S. F., RADONJIC, M., SOBOYEJO, W. O. Fracture and fatigue of natural fiber-reinforced cementitious composites. Cement and Concrete Composites, Vol. 31, 232 – 243, 2009.
SAVASTANO JR., H., WARDEN, P. G., COUTTS, R. S. P. Brazilian waste fibres as reinforcement for cement-based composites. Cement and Concrete Composites, Vol. 22, pp. 379 – 384, 2000.
SAVASTANO JR., H., WARDEN, P. G., COUTTS, R. S. P. Potential of alternative fibre cements as building materials for developing areas. Cement and Concrete Composites, Vol. 25, pp.585 – 592, 2003.
SENISSE, J. A. L. Influência do consumo de água, da adição de microfibras de polipropileno e do tipo de cimento no fenômeno d retração por secagem em concretos empregados em pisos. Universidade Federal do Rio Grande do Sul, Tese de doutorado, Porto Alegre, 2010.
SHVARZMAN, A., KOVLER, K., GRADER, G. S., SHTER, G. E. The effect of dehydroxylation/amorphization degree on pozzolanic activity of kaolinite. Cement and Concrete Research, Vol. 33, pp. 405 – 416, 2003.
SIDDIQUE, R. e KLAUS, J. Influence of metakaolin on the properties of mortar and concrete: A review. Applied Clay Science, Vol. 43, pp. 392 – 400, 2009.
SUBRAMANIAN, K., KUMAR, P. S., JEYAPAL, P., VENKATESH, N. Characterization of ligno-cellulosic seed fibre from Wrightia Tinctoria plant for textile applications—an exploratory investigation. European Polymer Journal, Vol. 41, pp. 853 – 861, 2005.
SWAMMY, H. S. Vegetable Plants and their Fibres as Building Materials. In: Sobral H. S., editor. Proceedings 2nd International Symposium on Vegetable Plants and Their Fibres as Building Materials London: Chapman and Hall; p. 334 – 342 (RILEM Proceedings, 7), 1990.
TAYLOR, H. F. W. Cement chemistry. 2a ed. London, Thomas Telford Publishing, 459 p.1997.
TIRONI, A., TREZZA, M. A., IRASSAR, E. F., SCIAN. N. A. Thermal treatment of kaolin: effect on the pozzolanic activity. Procedia Materials Science, Vol. 1: pp.343 - 350, 2012.
TOLEDO FILHO, R. D. e SANJUAN, M. A. Effect of low modulus sisal and polypropylene fibre on the free and restrained shrinkage of mortars at early age. Cement and Concrete Research, Vol. 29, pp. 1597–1604, 1999.
TOLEDO FILHO, R. D., SANJUAN, M. A., ENGLAND, G. L., GHAVAMI, K. Free, restrained and drying shrinkage of cement mortar composites reinforced with vegetable fibres. Cement and Concrete Composites, Vol. 27, pp. 537 – 546, 2005.
TOLEDO FILHO, R. D., SCRIVENER, K., ENGLAND G. L., GAVAMI K. Durability of alkali-sensitive sisal and coconut fibres in cement mortar composites. Cement and Concrete Composites, Vol 22, pp. 127 - 143, 2000.
TOLEDO FILHO, R. D., SILVA F. A., FAIRBAIRN, E. M. R., MELO, J. A. F. Durability of compression molded sisal fiber reinforced mortar laminates. Construction and Building Materials, Vol. 23, pp. 2409–2420, 2009.
TOLEDO FILHO, R. D., SCRIVENER, K., ENGLAND, G. L., GAVAMI, K. Development of vegetable fibre–mortar composites of improved durability Cement and Concrete Composites, Vol. 25, pp. 185 – 196, 2003.
TONGAROONSRI, S. e TANGTERMSIRIKUL, S. Effect of mineral admixtures and curing periods on shrinkage and cracking age under restrained condition. Construction and Building Materials, Vol. 23, pp. 1050 – 1056, 2009.
TONOLI, G. H. D., RODRIGUES, U. P. F., SAVASTANO JR., H., BRAS, J., BELGACEM, M. N., ROCCO LAHR, F. A. Cellulose modified fibres in cement based composites. Composites: Part A, Vol.40, pp. 2046 – 2053, 2009.
TONOLI, G. H. D., SANTOS, S. F., JOAQUIM, A. P., SAVASTANO JR., H. Effect of accelerated carbonation on cementitious roofing tiles reinforced with lignocellulosic fibre. Construction and Building Materials, Vol 24, pp.193 – 201, 2010.
YODSUDJAI W. e WANGB, K. Chemical shrinkage behavior of pastes made with different types of cements. Construction and Building Materials Vol. 40, pp. 854 – 862, 2013.
ZHANG, J., GAO, Y., WANG, Z. Evaluation of shrinkage induced cracking performance of low shrinkage engineered cementitious composite by ring tests. Composites: Part B, Vol. 52, pp. 21 – 29, 2013.
ZHANG, J., ZAKARIA, M., HAMA, Y. Influence of aggregate materials characteristics on the drying shrinkage properties of mortar and concrete. Construction and Building Materials, Vol. 49, pp. 500 – 10, 2013b.