Estudo, via TEM, dos precipitados formados nos aços IF durante resfriamento contínuo; Verificação da eficiência do modelo proposto neste trabalho identificado como Ferrita-
Tempo para a caracterização da cinética de transformação de fases austenita/ferrita em outros tipos de aços;
Determinação das temperaturas críticas durante resfriamento contínuo de outros tipos de aços e verificar a eficiência do ajuste com o modelo empírico proposto neste trabalho que relaciona as temperaturas críticas (oC) e a taxa de resfriamento (oC/s);
Utilização dos dados quantitativos gerados neste trabalho para simular física e computacionalmente o efeito de procedimentos de soldagem sobre a microestrutura e propriedades mecânicas de juntas soldadas de aços IF.
85
REFERÊNCIAS BIBLIOGRÁFICAS
ALMEIDA, G. M. R.; DAFÉ, S. S. F.; OLIVEIRA, F. L.; COTA, A. B. Modelagem da
formação não isotérmica da austenita em um aço de baixo carbono. Escola de Minas,
Ouro Preto, v.63, n.2, p.293-298, 2010.
ANDRÉS, C. G.; CABALLERO, F. G.; CAPDEVILA, C.; ÁLVAREZ, L. F. Application of
dilatometric analysis to the study of solid-solid phase transformations in steels. Materials Characterization, v.48, p.101-111, Maio/2002.
ASTM E3-11 (2017), Standard Guide for Preparation of Metallographic Specimens, ASTM International, West Conshohocken, PA, 2017, www.astm.org
ASTM E384-17, Standard Test Method for Microindentation Hardness of Materials, ASTM International, West Conshohocken, PA, 2017, www.astm.org
AVRAMI, M. J. Chem. Phys. 7 (1939) 1103.
BAYRAKTAR, E.; CHEVALIER, J. P.; KAPLAN, D.; DEVILLERS, L. Effect of Alloying
Elements on the Damage of Interstitial Free Steels. In: Proceedings of the SEM Annual
Conference, 2009, Albuquerque New Mexico USA. Society for Experimental Mechanics Inc, 2009.
BAYRAKTAR, E.; KAPLAN, D.; DEVILLERS, L.; CHEVALIER, J.P. Grain growth
mechanism during the welding of interstitial free (IF) steels. Journal of Materials
Processing Technology, v.189, p.114–125, 2007.
BENGOCHEA, R.; LÓPEZ, B.; GUTIERREZ, I. Microstructural Evolution during the
Austenite-to-Ferrite Transformation from Deformed Austenite. Metallurgical and
Materials Transactions A, v.29A, p.417-426, 1998.
BHADESHIA, H. K. D. H. Phase Transformations during Spot Welding of Interstitial-Free
Steel. In: Proceedings of the International Conference on Interstitial-free Steels,
Jamshedpur, India. 11p, 2010.
CABALLERO, F. G.; CAPDEVILA, C.; ANDRÉS, C. G. Modelling of Kinetics of Austenite
Formation in Steels with Different Initial Microstructures. ISIJ International, v.41, n.10,
86 CALLISTER, W. D. Jr. Materials Science and Engineering: Na Introduction. 7º Edição. New
York: Jonh Wiley & Sons, 2007. 705p.
CASARIN, Samuel José. Caracterização da Temperabilidade de um Aço C-Mn Microligado
ao Boro, através de Dilatometria e Curvas de Transformação de Fases por Resfriamento Contínuo. 1996. 181p. Tese (Doutorado em Ciência e em Engenharia de
Materiais) – EESC/IFSC/IQSC, USP, São Paulo, 1996.
CHEN, X.; XIAO, N.; CAI, M.; LI, D.; LI, G.; SUN, G.; ROLFE, B.F. A Modified Approach
to Modeling of Diffusive Transformation Kinetics from Nonisothermal Data and Experimental Verification. The Minerals, Metals & Materials Society and ASM
International. DOI: 10.1007/s11661-016-3608-2. 2016.
CORRÊA JÚNIOR, Joani Gebelhu. Efeito do processamento termomecânico na resistência à
fadiga de um aço IF. 2012. 107p. Dissertação (Mestrado em Engenharia de Materiais)
– REDEMAT/UFOP, Ouro Preto/MG, 2012.
COSTA e SILVA, A. L. V.; AVILLEZ, R. R. Avaliação de Precipitados em Aços Baixo
Carbono e IF (Interstitial Free) através da Termodinâmica Computacional.
Contribuição apresentada no 56º Congresso da ABM, Belo Horizonte/MG, 2001. DEARDO, A. J. Physical Metallurgy of Interstitial-Free Steels: Precipitates and Solutes, in IF
Steel 2000, ISS, Warrendale, PA, 2000, p.125-136.
DIAS, F. M. S.; FONSECA, F. A. V.; HAUEGEN, C. G.; LINS, J. F. C.; CAMPOS, M. F.
Textura e Comportamento Mecânico de Aços IF Estabilizados ao Ti e Nb-Ti. Tecnologia
em Metalurgia, Materiais e Mineração, São Paulo, v.9, n.4, p.294-301, 2012.
DINIZ, Eduardo de Oliveira. Análise da Influência do Nióbio na Microestrutura e
Propriedades Mecânicas da Barra Chata Temperada e Revenida para Aplicação em Feixes de Mola. 2005. 73p. Dissertação (Mestrado em Engenharia Metalúrgica) –
Escola de Engenharia/UFMG, Belo Horizonte/MG, 2005.
FARAHAT, A. I. Z. Dilatometry determination of phase transformation temperatures during
heating of Nb bearing low carbon steels. Journal of Materials Processing Technology,
v.204, Novembro/2007. p.365-369. Disponível em:
87 FARIA, G.L.; GODEFROID, L.B.; CÂNDIDO, L.C.; PENNA, R.V. Avaliação do Efeito da
Temperatura de Austenitização sobre a Temperatura de Início de Transformação Martensítica em Aços Eutetóides de Aplicação Ferroviária. 22º CBECiMat - Congresso
Brasileiro de Engenharia e Ciência dos Materiais. Novembro/2016, Natal, RN, Brasil. FERRO, P.; FABRIZI, A.; NILSSON, J.O. Intermetallic Phase Precipitation in Duplex
Stainless Steels: Considerations on the Use of Johnson-Mehl-AvramiKolmogorov Equation. Research and Reports on Metals 1:2, 2017.
FONSECA, M. A.; ALVES, W. B.; LACERDA, J. C. Estampabilidade dos Aços IF e AA para
Aplicação Automotiva. In: Congresso Brasileiro de Engenharia de Fabricação, 5º, Belo
Horizonte/MG, 2009.
FOSSAERT, C.; REES, G.; BHADESHIA, H.K.D.H. The effect of niobium on the
hardenability of microalloyed austenite. Metallurgical and Materials Transactions A,
vol. 26A, no. 1, pp. 21–30, Jan. 1995.
GAO, Q.; WANG, Y.; GONG, M.; QU, F.; LIN, X. Non-isothermal austenitic transformation
kinetics in Fe-10Cr-1Co alloy. Applied Physics A – Material Science & Processing.
DOI 10.1007/s00339-015-9585-2. 2016.
GHOSH, S.; DASHARATH, S.M.; MULA, S. Simulation Kinetics of Austenitic Phase
Transformation in Ti+Nb Stabilized IF and Microalloyed Steels. Journal of Materials
Engineering and Performance. DOI 10.1007/s11665-018-3358-y. 2018.
GHOSH, S.; SINGH, A. K.; MULA, S.; Effect of critical temperatures on microstructures and
mechanical properties of Nb-Ti stabilized IF steel processed by multiaxial forging.
Materials and Design, v.100, p.47-57, 2016.
GÓMEZ, M.; MEDINA, S. F.; CARUANA, G. Modelling of Phase Transformation Kinetics
by Correction of Dilatometry Results for a Ferritic Nb-microalloyed Steel. ISIJ
International, v.43, n.8, p.1228-1237, 2003.
GOULD, B.J.E.; KHURANA, S.P.; LI, T. Predictions of Microstructures when Welding
Automotive Advanced High-Strength Steels. Welding Research, p.111-116, Maio/2006.
GRAJCAR et al., 2016 GRAJCAR, A.; ZALECKI, W.; BURIN, W.; KOZŁOWSKA, A. Phase
88
Bainitic Steels. Metals 2016, 6, 248; doi:10.3390/met6100248. Disponível em:
www.mdpi.com/journal/metals.
GUNABALAPANDIAN, K.; SAMANTA, S.; SINGH, S. B. Investigation of Austenitization
in Low Carbon Microalloyed Steel During Continuos Heating. Metallurgical and
Materials Transactions A. DOI: 10.1007/s11661-017-4014-0. 2017.
HUA, M.; GARCIA, C. I.; DEARDO, A. J. Phase Transformations During
Thermal/Mechanical Proceessing of Steel, eds. E.B. Hawnolt and S. Yue, CIM,
Vancouver, BC, p.285-290, 1995.
JOHNSON, W.A.; MEHL, R.F. Trans. AIME 135 (1939) 416.
KARGUL, T. Investigations of temperatures of phase transformations of low-alloyed
reinforcing steel within the heat treatment temperature range. Archives of Metallurgy
and Materials, v.62, n.2, p.891-897, 2017.
KIM, S.; LEE, J, BARLAT, F.; LEE, M. Transformation kinetics and density models of
quenching and partitioning (Q&P) steels. Acta Materialia, v.109, p.394-404, 2016.
KLINKENBERG, C.; HULKA, K.; BLECK, W. Niobium Carbide Precipitation in
Microalloyed Steel. Materials Technology – Microalloyed Steels, v.75, n.11, p.744-758,
2004.
KOISTINEN, P.P.; MARBURGER, R.E. A General Equation Prescribing the Extent of The
Austenite-Martensite Transformation In Pure Iron-Carbon Alloys And Carbon Steel.
Acta Metallurgical, v.7, pp.59-60,1959.
KOLMOGOROV, A.E. Akad. Nauk SSSR Izv. Ser. Mat. 1 (1937) 355.
KONG et al., 2015 KONG, L.; LIU, Y.; LIU, J.; SONG, Y.; LI, S.; ZHANG, R.; LI, T.; LIANG, Y. The influence of chromium on the pearlite-austenite transformation kinetics of the
Fe-Cr-C ternary steels. Journal of Alloys and Compounds, v.648, p.494-499, 2015.
KOZESCHKIN, E., BUCHMAYR. R., “MatCalc – a simulation tool for multi-component thermodynamics, diffusion and phase transformation kinetics. In Mathematical Modelling of Weld Phenomena”, London Institute of Materials, v.5, p.349-361, 2001.
89 KRAUSS, G.; WILSHYNSKY, D.O.; MATLOCK, D.K., International Symposium on
Interstitial Free Steel Sheet: Processing, Fabrication and Properties, Ed. by L.E.
Collins and D.L. Baragar, p.1, CIM, Ottawa, Canada, 1991.
LASCOSQUI, P. S. B.; RODRIGUES, F. J. S. Desenvolvimento de aços ultra baixo carbono
estabilizados ao ti na CST Arcelor Brasil para aplicação automobilística. Congresso
Anual da Associação Brasileira de Metalurgia e Materiais, anais do 62º Congresso Anual da Associação Brasileira de Metalurgia e Materiais - São Paulo, 2007.
LAU, F. Curie Temperature of Iron. The Physics Factbook: An encyclopedia of scientific essays. 2002. Disponível em: https://hypertextbook.com/facts/2002/FeliciaLau.shtml. LEI, H. Curie Temperature of Iron. The Physics Factbook: An encyclopedia of scientific
essays. 2005. Disponível em: https://hypertextbook.com/facts/2002/FeliciaLau.shtml. LI, H.; GAI, K.; HE, L.; ZHANG, C.; CUI, H.; LI, M. Non-isothermal phase-transformation
kinetics model for evaluating the austenization of 55CrMo steel based on Johnson- Mehl-Avrami equation. Materials and Design, v.92, p.731-741, 2016.
LINO, R.; GUADANINI, L.G.L.; SILVA, L.B.; NETO, J.G.C.; BARBOSA, R. Effect of Nb
and Ti addition on activation energy for austenite hot deformation. Journal of Materials
Research and Technology. 2018. Disponível em:
https://doi.org/10.1016/j.jmrt.2017.11.002.
LIPS, K.; YANG, X.; MOLS, K.; The Effect of coiling temperature and continuous annealing
on the properties of bake hardenable IF Steels, Steel research, 67, n.9, p.357-363, 1996.
LIU, Z.; OLIVARES, R. O.; LEI, Y.; GARCIA, C.I.; WANG, G. Microstructural
characterization and recrystallization kinetics modeling of annealing cold-rolled vanadium microalloyed HSLA steels. Jornal of Alloys and Compounds, v.679, p.293-
301, 2016.
LOPES, M. M. B.; COTA, A. B. A Study of isochronal austenitization kinetics in a low carbono
steel. Escola de Minas, Ouro Preto, v.67, n.1, p.61-66, 2014.
MAALEKIAN, M.; RADIS, R.; MILITZER, M.; MOREAU, A.; POOLE, W.J. In situ
measurement and modelling of austenite grain growth in a Ti/Nb microalloyed steel.
90 MEDINA, S.F.; QUISPE, A.; VALLES, P.; BANOS, J.L. Recrystallization-Precipitation
Interaction Study of Two Medium Carbon Niobium Microalloyed Steels. ISIJ
International, v.39, p.913-922, 1999.
MILENIN, I.; PERNACH, M.; PIETRZYK, M. Application of the control theory for modelling
austenite-ferrite phase transformation in steels. Computer Methods in Materials
Science, v.15, n.2, p.1-9, 2015.
MILITZER, M.; HAWBOLT, E.B.; MEADOWCROFT, T.R. Microstructural model for hot
strip rolling of high-strength low-alloy steels. Metallurgical and Materials Transactions
31A, p.1247-1259, 2000.
MILITZER, M.; SUN, W.P.; HAWBOLT, E.B.; JONAS, J.J. Advances in Hot Deformation
Textures and Microstructures. The Minerals, Metals & Materials Society, p.157, 1994.
MOHRBACHER, H. Niobium Based Metallurgical Concepts and Strategies for the Production
of IF-HS and IF-BH Steel Grades. International Conference on Interstitial Free Steels:
Manufacturing Applications IFSTEEL-2010, Jamshedpur, India, 12p., 2010.
MUKHOPADHYAY, G.; BHATTACHARYA, S.; RAY, K.K. Strength assessment of spot-
welded sheets of interstitial free steels. Journal of Materials Processing Technology,
v.209, p.1995-2007, 2008.
OGATA, Paulo Henrique. Caracterização Microestrutural do Aço para Tubo API 5L-X65 em
Diferentes Regiões da Chapa como Laminada e após Austenitização e Resfriamento sob Diversas Taxas de Resfriamento. Dissertação (Mestrado em Engenharia Metalúrgica e
de Materiais) – Escola Politécnica/USP, São Paulo/SP, 2009.
PAWŁOWSKI, B.; Determination of Critical Points of Hypoeutectoid Steel. Archives of
Metallurgy and Materials, v.57, p.957-962, 2012.
PETKOV, P. Austenite Decomposition of Low Carbon High Strength Steels During Continuous
Cooling. The University of British Columbia. Master Degree, 2004.
RAO, S.S.; CHHIBBER, R.; ARORA, K.S.; SHOME, M. Resistance spot welding of
galvannealed high strength interstitial free steel. Journal of Materials Processing
91 REES, G.; PERDRIX, J.; MAURICKX, T.; BHADESHIA, H. The effect of niobium in solid
solution on the transformation kinetics of bainite. Materials Science & Engineering A:
Structural Materials: Properties, Microstructure and Processing, 194, p.179–186, 1995. REICHERT, J.M.; MILITZER, M. Quantifying the Effect of Nb and Mo and Transformation
Products Using Advanced EBSD Analysis. HSLA Steels 2015, Microalloying 2015 &
Offshore Engineering Steels 2015. The Chinese Society for Metals (CSM) and Chinese Academy of Engineering (CAE), 2015.
ROBINSON, I.D.G.; GARCIN, T.; POOLE, W.J. The Effect of Niobium on Austenite
Decomposition in Line Pipe Steels. Proceedings of 2016 11th International Pipeline
Conference IPC 2016, DRAFT, Calgary, Alberta, Canada. 2016.
SARAY, O.; PURCEK, G.; KARAMAN, I.; NEINDORF, T.; MAIER, H. J. Equal-channel
angular sheet extrusion of interstitial-free (IF) steel: Microstructural evolution and mechanical properties. Materials Science and Engineering A, v.528, p.6573-6583,
2011.
SHAHRIARI, B.; VAFAEI, R.; SHARIFI, E.M.; FARMANESH, K. Continuous cooling
transformation behavior and the kinetics of bainite formation in a bainitic-martensitic steel. International Journal of Materials Research, v.108, p.715-724, 2017.
SINGH, S. B.; KRISHNAN, K.; SAHAY, S. S. Modeling non-isothermal austenite to ferrite
transformation in low carbon steels. Materials Science and Engineering A, v.445-446,
p.310-315, 2007.
STARLING, James N. A. The Evolution of Solute Carbon during Continuous Annealing of
Interstitial-Free Steel and its Effects on Bake Hardenability. 1998. 130p. Dissertação
(Mestrado em Engenharia em Ciências da Engenharia) – Department of Materials and Metallurgical Engineering/Queen’s University, Kingston, Ontario, Canada, 1998. SUH, D. W.; OH, C. S.; HAN, H. N.; KIM, S. J. Dilatometric Analysis of Phase Fraction
during Austenite Decomposition into Banded Microstructure in Low-Carbon Steel.
Metallurgical and Materials Transactions A, v.38A, p.2963-2973, Dezembro/2007. SUH, D. W.; OH, C. S.; HAN, H. N.; KIM, S. J. Dilatometric analysis of austenite
92 v.55, Fevereiro/2007. p.2659-2669. Disponível em: www.sciendedirect.com. Acesso em: Novembro/2016.*
TANG, Z.; STUMPF, W. The role of molybdenum additions and prior deformation on acicular
ferrite formation in microalloyed Nb–Ti low-carbon line-pipe steels. Materials
Characterization, v.59, n.6, p.717–728, 2008.
THOMAS, M.H.; MICHAL, G.M. in: Proc. Int. Conf. on Solid–Solid Phase Transformations, TMS AIME, Warrendale, PA, 1981, p.469.
TITHER, G.; GARCIA, C.I.; HUA, M. and DEARDO, A.J. Precipitation Behavior and Solute
Effects in Interstitial-Free Steels Sheets. International Forum for Physical Metallurgy of
IF Steels, ISIJ, Tokyo, p. 293-322, 1994.
TOKUNAGA, Y. e KATO, H. Nippon Steel, Intemal Report, 1986.
TOMELLINI, M. Kolmogorov-Johnson-Mehl-Avrami kinetics for non-isothermal phase
transformations ruled by diffusional growth. Journal of Thermal Analysis and
Calorimetry. DOI 10.1007/s10973-013-3607-0. 2014.
UENISHI, A.; TEODOSIU, C. Solid solution softening at high strain rates in Si- and/or Mn-
added interstitial free steels. Acta Materialia, v.51, p.4437-4446, 2003.
VERMA, A.; SUNDARARAMAN, M.; SINGH, J.B.; NALAWADE, S.A. A new mthod for
determining the Curie temperature using a dilatometer. Measurement Science and
Technology, v.21, n.10, 10p, 2010.
WILSON, E.A.; MEDINA, S.F. Application of Koistinen and Marburger’s athermal equation
for volume fraction of martensite to diffusional transformations obtained on continuous cooling 0·13%C high strength low alloy steel. Materials Science and Technology, v.16,
p.630-633, 2000.
WU, Y.; ZHAO, X.; HE, C.; ZHANG, Y.; ZUO, L.; ESLING, C. Effect of High Magnetic Field
Annealing on Microstructure and Texture at the Initial Stage of Recrystallization in a Cold-Rolled Interstitial-Free Steel. Materials Transactions, v.48, n.11, p.2809-2815,
93 YAN, W.; SHAN, Y.Y.; YANG, K. Effect of TiN Inclusions on the Impact Toughness of Low-
Carbon Microalloyed Steels. Metallurgical and Materials Transactions A, v.37A,
p.2147-2158, 2006.
ZHANG, L.P.; DAVIS, C.L.; STRANGWOOD, M. Effect of TiN Particles and Microstructure
on Fracture Toughness in Simulated Heat-Affected Zones of a Structural Steel.
Metallurgical and Materials Transactions A, v.30A, p.2089-2096, 1999.
ZHAO, J. Z.; MESPLONT, C.; DE COOMAN, B. C. Kinetics of Phase Transformations in
Steels: A New Method for Analysing Dilatometric Results. ISIJ International, v.41,