5. DISCUSSION
5.1.2 Moderating effects of priming
A seguir são apresentadas algumas sugestões e propostas de atividades de pesquisa que podem enriquecer e dar continuidade ao trabalho desenvolvido neste mestrado.
Avaliar o desgaste de ferramentas de corte na usinagem de aços ferríticos com grãos ultrafinos;
Comparar os resultados de microestrutura, microdureza e formação do cavaco com resultados de ensaios de fadiga e força de corte;
Avaliar a viabilidade do emprego da estrutura de grãos ultrafinos em aços baixo carbono na produção de moldes;
Verificar o encruamento ou possíveis mudanças de fase na camada superficial afetada pelo processo de fresamento com o uso de difratometria;
Comparar o comportamento do perfil de microdureza do material nomeado “como recebido” pelo processo de fresamento com outros processos de usinagem;
Estudar a usinabilidade e a integridade superficial dos aços ferríticos com grãos ultrafinos no processo de microfresamento;
Investigar a influência do tamanho de grão do material da peça nos processos de microusinagem;
Comparar os resultados experimentais de formação de cavaco com os gerados por modelos computacionais;
Realizar ensaios mecânicos, tais como Charpy e Tração, a fim de obter dados de propriedades mecânicas que complementem a avaliação da usinabilidade do material de grãos ultrafinos.
REFERÊNCIAS
ABDALLA, A. J. et al. Formação da fase bainítica em aços de baixo carbono. Revista Brasileira de Aplicações de Vácuo, Bauru, v. 25, n. 3, p.175-181, out. 2006.
ABDALLA, A. J. et al. Tratamentos térmicos para a formação de bainita em aços multifásicos de baixo carbono. In: CONGRESSO BRASILEIRO DE ENGENHARIA E CIÊNCIAS DOS MATERIAIS, 17., 2006, Foz do Iguaçu. Anais... [S.I.: s.n], 2006. v. 1, p. 7009-7020. ABUKHSHIM, N. A.; MATIVENGA, P. T.; SHEIKH, M. A. Heat generation and temperature prediction in metal cutting: A review and implications for high speed machining. International Journal of Machine Tools and Manufacture, Oxford, v. 46, n. 7-8, p. 782-800, June 2006. ABUKHSHIM, N. A.; MATIVENGA, P. T.; SHEIKH, M. A. Investigation of heat partition in high-speed turning of high strength alloy steel. International Journal of Machine Tools and Manufacture, Oxford, v. 45, n. 15, p. 1687-1695, Dec. 2005.
AÇO com tratamento termomecânico substitui metal altamente ligado. Máquinas e Metais, São Paulo, v. 19, n. 510, p. 22-24, 2008.
AMARO, J. P. M. et al. Desenvolvimento de aços baixa-liga de construção mecânica com usinabilidade melhorada. In: CONGRESSO ANUAL DA ABM, 37., 1982, Rio de Janeiro. Anais... [S.I.: s.n.], 1982. p. 271-281.
AMERICAN SOCIETY FOR TESTING AND MATERIALS. ASTM E112-96: Standard test methods for determining average grain size. West Conshohocken, 2004. 26 p.
AMERICAN SOCIETY FOR TESTING AND MATERIALS. ASTM E92-92: Standard test method for Vickers hardness of metallic materials. West Conshohocken, 2001. 9 p. AMERICAN SOCIETY FOR TESTING AND MATERIALS. ASTM E562: Standard test method for determining volume fraction by systematic manual point count. West Conshohocken, 2001. 7 p.
ASTAKHOV, V. P. On the inadequacy of the single-shear plane model of chip formation. International Journal of Mechanical Sciences, v. 45, n. 11, p. 1649-1672, Nov. 2005. BÄKER, M. Finite element simulation of high-speed cutting forces. Journal of Materials Processing Technology, Amsterdam, v. 176, n. 1-3, p. 117-126, June 2006.
BÄKER, M. The influence of plastic properties on chip formation. Computational Materials Science, New York, v. 28, n. 3-4, p. 556-562, Nov. 2003.
BÄKER, M.; RÖSLER, J.; SIEMERS, C. The influence of thermal conductivity on segmented chip formation. Computational Materials Science, New York, v. 26, p. 175-182, Jan. 2003. BALDISSERA, M. R. et al. Análise por elementos finitos do processo ECAP (Prensagem em Canais Equiangulares) do aço VMB 300. In: CONGRESSO BRASILEIRO DE ENGENHARIA E CIÊNCIAS DOS MATERIAIS, 17., 2006, Foz do Iguaçu. Anais... [S.I.: s.n.], 2006. v. 1, p. 6434-6443.
BAPTISTA, A. L. B. Aspectos metalúrgicos na avaliação da usinabilidade de aços. Revista Escola de Minas, Ouro Preto, v. 55, n. 2, p. 103-109, abr. 2002.
BARBOSA, P. A.; COSTA, E. S.; MACHADO, A. R. Usinabilidade de ferro fundido austemperado e nodular perlítico em furação. In: SIMPÓSIO DO PROGRAMA DE PÓS- GRADUAÇÃO EM ENGENHARIA MECÂNICA, 17., 2007, Uberlândia. Anais eletrônicos... Uberlândia: FEMEC/UFU, 2007. Disponível em:
<http://www.posgrad.mecanica.ufu.br/posmec/17/PDF/29.pdf>. Acesso em: 19/01/2010. BELADI, H. et al. The evolution of ultrafine ferrite formation through dynamic strain-induced transformation. Materials Science and Engineering A, Salt Lake City, v. 371, n. 1-2, p.343-352, Apr. 2004.
BLACK, J. T. Mechanics of chip formation. In: DAVIS, J. R. (Ed.). Metals handbook: machining. 9. ed. Ohio: ASM, 1989. v. 16, p. 7-12.
BLÜMKE, R.; SAHM, A.; MÜLLER, C. Influence of heat treatment on chip formation in high- speed milling. In: SHULZ, H. (Ed.). Scientific Fundamentals of HSC. Munich: Druckhaus, 2001. p. 43-52.
BRZUSZEK, R. K. et al. Microstructural evolution of ultra fine grained C-Mn steel warm rolling and intercritical annealed. Materials Research, São Carlos, v. 5, n. 3, p. 343-348, July 2002.
CAMARGO, R. Verificação da usinabilidade dos aços inoxidáveis austeníticos através
do processo de furação. 2008. 100 f. Dissertação (Mestrado) – Departamento de
Engenharia de Fabricação) – Faculdade de Engenharia Mecânica, Universidade Estadual de Campinas, Campinas, 2008.
CARVALHO, R. N. et al. Possibilidade de produção de grão ultrafino na laminação de tubos sem costura. [S.l.: s.n., 2007]. Disponível em:
<http://www.abmbrasil.com.br/cim/download/2simposio_aco_ronaldobarbosa.pps>. Acesso em: 09 dez. 2009.
CHIAVERINI, V. Aços e ferros fundidos. 7. ed. São Paulo: ABM, 1998. 599 p. CHRISTOFFEL, K. High-speed machining from a tool manufacturer’s perspective. In: SEMINÁRIO INTERNACIONAL DE ALTA TECNOLOGIA-MANUFATURA AVANÇADA, 6., 2001, Piracicaba. Anais... Piracicaba: UNIMEP, 2001. p. 121-151.
CHOI, J. et al. Formation of ultrafine ferrite by strain-induced dynamic transformation in plain low carbon steel. Iron Steel Institute Japan International, Tokyo, v. 43, n. 5, p. 746-754, May 2003.
CONSALTER, L. A.; GUEDES, L. C.; PUREY, J. A. Usinabilidade de ferros fundidos. Fundição e Matérias Primas, São Paulo, n. 84, p. 39-45, 1987.
COSTA, A. L. M. et al. Chapas de aço do tipo “IF” com estrutura ultra-refinada obtidas por laminação severa. Tecnologia em Metalurgia e Materiais, São Paulo, v. 2, n. 1, p. 64-69, July 2005.
CUNHA, L. B. Influência da adição de cobre nos ferros fundidos nodulares
hipereutéticos sobre a usinabilidade e propriedades mecânicas. 1985. 248 f. Tese (Doutorado) - Universidade Estadual de Campinas, Campinas, 1985.
DEWES, R. C.; ASPINWALL, D. K. A review of ultra high-speed milling of hardened steels. Journal of Materials Processing Technology, Amsterdam, v. 69, n. 1-3, p. 1-17, 1997. DINIZ, A. E.; COPPINI, N. L. Estudo do processo de furação de aços inoxidáveis
austeníticos. Metalurgia e Materiais, São Paulo, v. 41, n. 349, p. 881-886, dez. 1986. DINIZ, A.; MARCONDES, F. C.; COPPINI, N. L. Tecnologia da usinagem dos materiais. 2. ed. São Paulo: Artliber, 2000. 244 p.
DOLINŠEK, S.; EKINOVIĆ, S.; KOPAĈ, J. A contribution to the understanding of chip formation mechanism in high-speed cutting of hardened steel. Journal of Materials Processing Technology, Amsterdam, v. 157-158, p. 485-490, Dec. 2004.
DOLINŠEK, S.; ŠUŠTARŠIĈ, B.; KOPAĈ, J. Wear mechanisms of cutting tools in high- speed cutting processes. Wear, v. 250, n. 1-12, p. 349-356, Oct. 2001.
EGHBALI, B.; ABDOLLAH-ZADEH, A. The influence of thermomechanical parameters in ferrite grain refinement in a low carbon Nb-microalloyed steel. Scripta Materialia,
Amsterdam, v. 51, n. 1, p. 41-45, July 2005.
FACCIO, I. Investigação sobre o acabamento superficial de usinagens com altíssimas velocidades de corte. 2002. 126 f. Dissertação (Mestrado) – Departamento de Engenharia Mecânica, Escola Politécnica, Universidade de São Paulo, São Paulo, 2002.
FACCIO, I.; BATALHA, G. F. Novos desenvolvimentos em usinagem em alta velocidade. In: WORKSHOP NOVOS DESEMVOLVIMENTOS EM ENGENHARIA DE FABRICAÇÃO, 1., 2004, São Paulo. Anais... São Paulo: EPUSP, 2004.
FERRARESI, D. Fundamentos da usinagem dos metais. São Paulo: Edgard Blücher, 1970. 754 p.
FERREIRA, J. L; MELO, T. M. F., RIOS, P. R. Efeitos de parâmetros termomecânicos em mecanismos dinâmicos de refino de grão em aços C-Mn-Nb e C-Mn. Tecnologia em Metalurgia e Materiais, São Paulo, v. 3, n. 4, p. 29-35, abr. 2007.
FLOM, D. G.; KOMANDURI, R. High-speed machining. In: DAVIS, J. R. (Ed.). Metals handbook: machining. 9. ed. Ohio: ASM, 1989. v. 16, p. 597-606.
GAO, M. et al. Laser-TIG welding of ultra-fine grained steel. Journal of Materials Processing Technology, Amsterdam, v. 209, n. 2, p.785-791, Jan. 2009.
GONZALES, G. S. et al. Ensaios de usinabilidade acelerados do tipo Mathon, aplicação na caracterização de aços de usinagem fácil. In: CONGRESSO BRASILEIRO DE
ENGENHARIA MECÂNICA, 6., 1981, Rio de Janeiro. Anais... [S.I.: s.n.], 1981.
GONZALES, G. S.; CUPINI, N. L. Influência do grau de encruamento após trefilação em ensaios de usinabilidade por torneamento no aço SAE 12L14. In: CONGRESSO ANUAL DA ABM, 45., 1990, Rio de Janeiro. Anais... [S.I.: s.n.], 1990. p. 343-357.
GORNI, A. A. Produção industrial de aços com grão ultra-fino através de laminação a quente. [S.l.: s.n., 2007]. Disponível em:
<http://www.abmbrasil.com.br/cim/download/2simposio_aco_antonioaugusto.pps>. Acesso em: 09 dez. 2009.
GORNI, A. A.; SILVEIRA, J. H. D.; REIS, J. S. S. Estudo avalia o desenvolvimento de
chapas de aço com grão ultra-fino. Corte e Conformação de Metais, São Paulo, v. 3, n. 27, p.78-105, jul. 2007.
HAN, B. Q.; YUE, S. Processing of ultrafine ferrite steels. Journal of Materials Processing Technology, Amsterdam, v. 136, n. 1-3, p. 100-104, May 2003.
HAWKINS, D. N.; SHUTTLEWORTH, A. A. The effect of warm rolling on the structure and properties of low-carbon steel. Journal of Mechanical Working Technology, Amsterdam, v. 2, n. 4, p. 333-345, Feb. 1979.
HAYASHI, T.; SAITO, M.; TSUZAKI, K.; NAGAI, K. Formation of equiaxial fine ferrite grain structures through warm forging of low carbon martensite. In: INTERNATIONAL
CONFERENCE ON RECYSTRALLIZATION AND RELATED PHENOMENA (Rex99), 1999, Tsukuba. Proceedings... Tsukuba, Japan: The Japan Institute of Metals, 1999. p. 333-338. HELLENO, A. L.; SCHÜTZER, K. Fatores que influenciam a usinagem de moldes e matrizes com altas velocidades. Revista de Ciência & Tecnologia, Piracicaba, v. 12, n. 23, p. 7-14, jan. 2004.
HELLENO, A. L; SCHÜTZER, K. Usinagem de moldes de matrizes com velocidades na faixa de transição para HSC (High-Speed Cutting). In: CONGRESSO BRASILEIRO DE
ENGENHARIA DE FABRICAÇÃO – COBEF, 2., 2003, Uberlândia. Anais... Uberlândia: UFU, 2003.
HICKSON, M. R. et al. The production of ultrafine ferrite in low-carbon steel by strain-induced transformation. Metallurgical and Materials Transactions A, Pittsburgh, v. 33, n. 4, p. 1019-1026, Apr. 2002.
HORITA, Z.; FUJINAMI, T.; LANGDON, T. G. The potential for scaling ECAP: effect of sample size on grain refinement and mechanical properties. Materials Science and Engineering A, Amsterdam, v. 318, n. 1-2, p. 34-41, Nov. 2001.
HURLEY, P. J.; HODGSON, P. D. Formation of ultra-fine ferrite in hot rolled strip: potential mechanisms for grain refinement. Materials Science and Engineering A, Amsterdam, v. 302, n. 2, p. 206-214, Apr. 2001.
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION. ISO 3685: Tool-life testing with single-point turning tools: test method: scope. Geneva, 1993. 48 p.
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION. ISO 14577-1: Metallic materials - Instrumented indentation test for hardness and materials parameters: test method: scope. Geneva, 2002. 25 p.
KAHLES, J. F.; FIELD, M.; HARVEY, S. M. Survey: production uses & development work on high speed machining. American Machinist, New York, v. 123, n. 3, p. 117-121, Mar. 1979. KISHAWY, H. A. et al. Effect of coolant strategy on tool performance, chip morphology and surface quality during high speed machining of A356 aluminum alloy. International Journal of Machine Tools and Manufacture, Oxford, v. 45, n. 2, p. 219-227, Feb. 2005.
KISHAWY, H. A.; BECZE, C. E. Morphology of chips formed high speed milling of die and mold tools steel using ball end mills. Transactions of NAMRI/SME, Dearborn, v. 30, p. 183- 190, 2002.
KLOCKE, F.; HOPPE, S. Mechanisms of chip formation in high speed cutting. In: SCHULZ, H. (Ed.). Scientific Fundamentals of HSC. Munich: Druckhaus, 2001. p. 1-10.
KOMANDURI, R. High-speed machining. Mechanical Engineering, New York, p. 64-76, 1985.
LANGDON, T. G. et al. Using equal-channel angular pressing for refining grain size. Journal of the Minerals, Metals and Materials Society, Boston, v. 52, n. 4, p. 30-33, Apr. 2000. LEZANSKI, P.; SHAW, M. C. Tool face temperature in high speed milling. ASME Journal of Engineering for industry, v. 112, p. 132-135, 1990.
LI, Q.; CUI, X.; CHEN, H. Effect of deformation-induced transformation process on ferrite grain size and volume fraction in steel 12CR1MOV. International Journal of Modern Physics B, Singapore, v. 23, n. 5-6, p.1197-1202, Sep. 2009.
LIMIDO, J. et al. SPH method applied to high speed cutting modelling. International Journal of Mechanical Sciences, Elmsford, v. 49, n. 7, p. 898-908, Sep. 2007.
LONGBOTTOM, J. M.; LANHAM, J. D. A review of research related to Salomon’s hypothesis on cutting speeds and temperatures. International Journal of Machine Tools and
LUIZ, N. E.; GALVANINI, L. T. B.; MACHADO, A. R. Tecnologias de melhoria da
usinabilidade dos aços: uma revisão. In: COLÓQUIO DE USINAGEM, 9., 2003, Uberlândia. Anais eletrônicos… Uberlândia: UFU, 2003. Disponível em:
<http://www.ifm.org.br/fase1/congresso/inscritos/teste2.php> Acesso em: 19/01/2010. LUO, Y. Chip formation analysis for high speed cutting. Journal of Advanced
Manufacturing Systems, Singapore, v. 2, n. 2, p. 247-254, 2003.
MABROUKI, T.; RIGAL, J. F. A contribution to a qualitative understanding of thermo-
mechanical effects during chip formation in hard turning. Journal of Materials Processing Technology, Amsterdam, v. 176, n. 1-3, p. 214-221, Jun. 2006.
MACHADO, A. R. et al. Teoria da usinagem dos materiais. São Paulo: Editora Blucher, 2009. 384 p.
MATSUMOYO, H.; MINATOGAWA, J.; GALLEGO, J. Influência da microestrutura na usinabilidade dos aços inoxidáveis AISI 630 com e sem adição de cálcio. Revista Matéria, Rio de Janeiro, v. 10, n. 2, p. 213-221, jun. 2005.
McGEE, F. J. Study: methods for aluminum work pieces. American Machinist, New York, v. 123, n. 3, p. 121-126, 1979.
MESQUITA, R. A.; BARBOSA, C. A. Desenvolvimento de aço com usinabilidade melhorada e aços endurecíveis por precipitação para moldes de plástico. Tecnologia em Metalurgia e Materiais, São Paulo, v. 1, n. 4, p. 11-15, abr.-jun. 2005.
MILITZER, M.; BRECHET, Y. Phenomenological model for deformation-induced ferrite transformation. Metallurgical and Materials Transactions A, Pittsburgh, v. 40, n. 10, p. 2273-2282, Oct. 2009.
MOON, J. et al. Orowan strengthening effect on the nanoindentation hardness of the ferrite matrix in microalloyed steels. Materials Science and Engineering A, Amsterdam, v. 487, n. 1-2, p. 552-557, Jul. 2008.
MÜLLER, C.; BLÜMKE, R. Influence of heat treatment and cutting on chip segmentation of age hardenable aluminium alloy. Materials Science and Technology, Westerville, v. 17, n. 6, p. 651-654, Jun. 2001.
NEVES, É. G. et al. Comportamento mecânico de um aço C-Mn de grão ultra-fino produzido por torção a quente e recozimento intercrítico. In: REUNIÃO ANUAL DA SBPC, 58., 2006. Florianópolis. Anais eletrônicos... São Paulo: SBPC/UFSC, 2006. Disponível em:
<http://www.sbpcnet.org.br/livro/58ra>. Acesso em: 17/09/2008.
NING, Y.; RAHMAN, M.; WONG, Y. S. Investigation of chip formation in high-speed end milling. Journal of Materials Processing Technology, Amsterdam, v. 113, n. 1-3, p. 360- 367, June 2001.
NOVASKI, O. et al. Aspectos técnicos do fresamento na zona de transição entre as velocidades convencionais e a alta velocidade. In: CONGRESSO BRASILEIRO DE
ENGENHARIA DE FABRICAÇÃO-COBEF, 1., 2001, Curitiba. Anais... Curitiba: UFPR, 2001. NUNES, J. M. et al. Influência da interpolação na trajetória da ferramenta no fresamento a altas velocidades de superfícies complexas. Tecnologia em Metalurgia e Materiais, São Paulo, v. 4, n. 4, p. 37-42, abr.-jun. 2008.
OKITSU, Y.; TAKATA N.; TSUJI, N. A new route to fabricate ultrafine-grained structures in carbon steels without severe plastic deformation. Scripta Materialia, Amsterdam, v. 60, n. 2, p. 76-79, Jan. 2009.
OLIVEIRA JR., G. G. Fatores metalúrgicos que condionam a usinabilidade das ligas de alumínio. In: CONGRESSO ANUAL DA ABM, 42., 1987, Salvador. Anais... [S.I.: s.n.], 1987. p. 203-216.
PALMAI, Z. Cutting temperature in intermittent cutting. International Journal of Machine Tools and Manufacture, Oxford, v. 27, n. 2, p. 261-274, 1987.
PARENT-SIMONIN, S. Mesure de l’ usinabilité dês malleábles a partir de I’ essai Renault- Mathon. Founderie, [S.l.]., v. 31, n. 356, p. 165-174, 1976.
PARK, K. T. et al. Thermal stability and mechanical properties of ultrafine grained low carbon steel. Materials Science and Engineering A, Amsterdam, v. 293, n. 1-2, p. 165-172, Nov. 2000.
PAULO, R. G. R. Avaliação da integridade superficial e usinabilidade de engrenagens forjadas utilizando fresamento com alta velocidade de corte. 2008. 169 f. Dissertação (Mestrado) - Departamento de Engenharia Mecânica, Faculdade de Engenharia de Ilha Solteira, Universidade Estadual Paulista, Ilha Solteira, 2008.
PAWADE, R. S.; JOSHI, S. S.; BRAHMANKAR, P. K. Effect of machining parameters and cutting edge geometry on surface integrity of high-speed turned Inconel 718. International Journal of Machine Tools and Manufacture, Oxford, v. 48, n. 1, p. 15-28, Jan. 2008. PIMENTEL, M. F.; PRADO, E. L.; MIYADA, K. Avaliação da usinabilidade dos aços de corte fácil através da elaboração de curvas de usinabilidade (curvas de Taylor) com uso de ferramentas de corte de aço rápido. In: CONGRESSO ANUAL DA ABM, 59., 2004, São Paulo. Anais... [S.I.: s.n.], 2004.
RAO, B.; SHIN, Y. C. Analysis on high-speed face-milling of 7075-T6 aluminum using carbide and diamond cutters. International Journal of Machine Tools and Manufacture, Oxford, v. 41, n. 12, p. 1763-1781, Sep. 2001.
RODRIGUES, A. R. Estudo da geometria de arestas de corte aplicadas em usinagem com altas velocidades de corte. 2005. 227 f. Tese (Doutorado) - Escola de Engenharia de São Carlos, Universidade de São Paulo, São Carlos, 2005.
RODRIGUES, J. R. P. et al. Investigação da usinabilidade de aços e ligas não-ferrosas. Pesquisa em Foco, São Luiz, v. 17, n. 2, p. 53-59, 2009.
RODRIGUEZ-BARACALDO, R. et al. Microstructural evolution and mechanical response of nanocrystalline and ultrafine-grained steel obtained by mechanical milling. Materials
Science and Engineering A, Amsterdam, v. 493, n. 1-2, p. 215-220, Oct. 2008.
SAITO, Y. et al. Ultra-fine grained bulk aluminum produced by accumulative roll-bonding (ARB) process. Scripta Materialia, Amsterdam, v. 39, n. 9, p. 1221-1227, Oct. 1998. SANTOS A. V. et al. Como os conceitos HSM/HSC podem revolucionar a indústria metal- mecânica. In: SANDIVIK. Usinagem em altíssimas velocidades. São Paulo: Érica, 2003. p. 29-30.
SCHULTZ, H. High speed milling of aluminium alloys. In: WINTER ANNUAL MEETING OF THE ASME, 1984, New Orleans. Proceeddings… [S.I.: s.n.], 1984. p. 241-244.
SCHULZ, H, ABELE, E.; SAHM, A. High-speed machining-fundamentals and industrial application. In: SEMINÁRIO INTERNATIONAL DE ALTA TECNOLOGIA-MANUFATURA AVANÇADA, 6., 2001, Piracicaba. Anais… Piracicaba: UNIMEP, 2001, p. 25-44.
SCHULZ, H. High-speed milling machines. In: SEMINÁRIO INTERNACIONAL DE ALTA TECNOLOGIA – USINAGEM COM ALTÍSSIMA VELOCIDADE DE CORTE, 1., 1996, Santa Bárbara d’Oeste. Anais... Santa Bárbara d’Oeste: UNIMEP, 1996.
SCHULZ, H. Scientific fundamentals of HSC. Munich: Carl Hanser, 2001. 202 p. SCHULZ, H. The history of high-speed machining. Revista Ciência e Tecnologia, Piracicaba, v. 7, n. 13, p. 9-18, jun. 1999.
SCHÜTZER, K. Tecnologia HSC está completando 70 anos. [S.I.: s.n., 200?] Disponível em: <http://www.usinagem–brasil.com.br>. Acesso em: 3 de out. 2001.
SCHÜTZER, K.; SCHULZ, H. Histórico da usinagem com altíssima velocidade até os dias atuais. In: SANDIVIK. Usinagem em altíssimas velocidades. São Paulo: Érica, 2003. Cap. 1, p. 13-28.
SCHÜTZER, K.; SOUZA, A. F. Introdução do processo HSC na indústria brasileira. In:
SEMINÁRIO INTERNACIONAL DE ALTA TECNOLOGIA, 4., 1999, Santa Bárbara d’Oeste.
Anais... Santa Bárbara d’Oeste: SCPM, 1999.
SHAW, M. C. Metal cutting principles. New York: Oxford Science, 1997. 594 p.
SHOKOUHI, A.; HODGSON, P. D. Effect of transformation mechanism (static or dynamic) on final ferrite grain size. Materials Science and Technology, Westerville, v. 25, n. 1, p. 29-34, Jan. 2009.
SILVA NETO, O. V. Obtenção de grãos ferríticos ultrafinos em aços baixo-carbono
através do processamento subcrítico. 2006. 112 f. Tese (Doutorado) – Centro de
Ciências Exatas e de Tecnologia, Universidade Federal de São Carlos, São Carlos, 2006. SILVA NETO, O. V.; BALANCIN, O. Efeito da precipitação de cementita na formação de contornos de angulo e refino de grão ferrítico em aço baixo carbono. Acta Microscopica, Caracas, v. 16, n. 1-2, p. 31.37, Dec. 2007.
SILVA, L. R. Estudo da geometria da aresta de corte de ferramentas aplicadas ao torneamento de superligas à base de níquel com alta velocidade de corte. 2002. 211 f. Tese (Doutorado) – Escola de Engenharia de São Carlos, Universidade de São Paulo, São Carlos, 2002.
SILVA, R. B. et al. Investigação da usinabilidade do ferro fundido nodular: primeira parte. In: SIMPÓSIO DO PROGRAMA DE PÓS-GRADUAÇÃO EM ENGENHARIA MECÂNICA, 15., 2005, Uberlândia. Anais eletrônicos... Uberlândia: FEMEC/UFU, 2005. Disponível em: <http://www.posgrad.mecanica.ufu.br/posmec/15/pdf/POSMEC052.pdf>. Acesso em: 19/01/2010.
SMITH, G. T. Ultra-high speed machining: the problems associated with spindle designs, tooling and machined parts when milling. In: JOINT INTERNATIONAL CONFERENCE, FLEXIBLE AUTOMATION AND INFORMATION MANAGEMENT, 1992, Falls Church. Anais… Falls Church: Virginia Polytechnic and State University, 1992. p. 947-961. SOUZA, A. F. Contribuições ao fresamento de geometrias complexas aplicando a
tecnologia de usinagem com altas velocidades. 2004. 171 f. Tese (Doutorado) – Escola
de Engenharia de São Carlos, Universidade de São Paulo, São Carlos, 2004.
STOLYAROV, V. V. et al. Ultrafine-grained Al-5 wt.% Fe alloy processed by ECAP with backpressure. Materials Science and Engineering A, Amsterdam, v. 357, n. 1-2, p. 159- 167, Sep. 2003.
SUN, Z. Q. et al. Deformation enhanced transformation and dynamic recrystallization of ferrite in a low carbon steel during multipass hot deformation. Materials Science and Engineering A, Amsterdam, v. 334, n. 1-2, p. 201-206, Sep. 2002.
SUTTER, G. Chip geometries during high-speed machining for orthogonal conditions. International Journal of Machine Tools and Manufacture, Oxford, v. 45, n. 6, p. 719-726, May 2005.
SUTTER, G. et al. An experimental technique for the measurement of temperature fields for the orthogonal cutting in high speed machining. International Journal of Machine Tools and Manufacture, Oxford, v. 43, n. 7, p. 671-678, May 2003.
SUTTER, G.; RANC, N. Temperature fields in a chip during high-speed orthogonal cutting: an experimental investigation. International Journal of Machine Tools and Manufacture, Oxford, v. 47, n. 10, p. 1507-1517, Aug. 2007.
TAO, N. R. et al. An investigation of surface nanocrystallization mechanism in Fe induced by surface mechanical attrition treatment. Acta Materialia, Oxford, v. 50, n. 18, p. 4603-4616, Oct. 2002.
TESSLER, M. B.; BARBOSA, C. A. A usinabilidade dos aços inoxidáveis. Metalurgia e Materiais, São Paulo, v. 49, n. 413, p. 32-41, 1993.
TOH, C. K. Cutter path strategies in high-speed rough milling of hardened steel. Materials & Design, Surrey, v. 27, n. 2, p. 107-114, 2006.
TOH, C. K. Static and dynamic cutting force analysis when high speed rough milling hardened steel. Materials and Design, Surrey, v. 25, n. 1, p. 41-50, Feb. 2004.
TÖNSHOFF, H. K. et al. High-speed or high-performance cutting: a comparison of new machining technologies. Production Engineering, Cleveland, v. 8, n. 1, p. 5-8, 2001. TSUCHIDA, N. et al. Effect of ferrite grain size on tensile deformation behavior of a ferrite- cementite low carbon steel. Materials Science and Engineering A, Amsterdam, v. 488, n. 1-2, p. 446-452, Aug. 2008.
TSUJI, N. Ultrafine grained steels managing both high strength and ductility. Journal of Physics: Conference Series, Bristol, v. 165, 2009. Não paginado.
VIGNEAU, J. Obtendo alta produtividade na usinagem de ligas de titânio e superligas. Máquinas e Metais, São Paulo, n. 380, p. 16-31, 1997.
WANG, T. S. et al. A novel process to obtain ultrafine-grained low carbon steel with bimodal grain size distribution for potentially improving ductility. Materials Science and Engineering A, Amsterdam, v. 485, n. 1-2, p. 456-460, June 2008.
WANG, Z. G.; WONG, Y. S.; RAHMAN, M. High-speed milling of titanium alloys using binderless CBN tools. International Journal of Machine Tools and Manufacture, Oxford, v. 45, n. 1, p. 105-114, Jan. 2005.
WENG, Y. Ultra-fine grained steels. Beijing: Metallurgical Industry Press; New York: Springer Berlin Heidelberg, 2009. 569 p.
XIANGHUA, L. et al. High performance low cost steels with ultrafine grained and mult-
phased microstructure. Science in China Series E: Technological Sciences, Springer, v. 52, n. 8, p. 2245-2254, Aug. 2009.
YANAGIMOTO, J. et al. Control of ultrafine microstructure by single-pass heavy deformation and cold forging of metal. Journal of Materials Processing Technology, Amsterdam, v. 209, n. 2, p. 679-685, Jan. 2009.
YOKOTA, T.; FUJIOKA, M.; NIIKURA, M. Grain structure of Fe-0.3mass%C-9mass%Ni steel processed through ’ transformation caused by spontaneous reverse transformation. Iron Steel Institute Japan International, Tokyo, v. 45, n. 5, p. 736-742, Jan. 2005.
ZHENG, C. et al. On the ferrite refinement during the dynamic strain-induced transformation: a cellular automaton modeling. Scripta Materialia, Amsterdam, v. 58, n. 10, p. 838-841, May 2008.
ZHUANG, L. Effect of thermomechanical controlled processing on mechanical properties of 490 MPa grade low carbon cold heading steel. Journal of Iron and Steel Research International,Beijing, v. 16, n. 3, p. 43-48, May 2009.