• Refinar a metodologia de quantificação das fases para poder separar e quantificar ferrita acicular de bainita em amostras deformadas e adicionar mais parâmetros para quantificação de fases em amostras na condição sem deformação.
• Refinar a metodologia de validação utilizando a regra das misturas, realizando mais medidas de dureza em diversas regiões da amostra para obter o erro desta metodologia.
84
8. Referências Bibliográficas
American Society for Testing and Materials. Standard Test Methods for Determining
Volume Fraction by Systematic Manual Point Count. ASTM E 562. 2006.
BASU, B.; TRIPATHI, S. M.; MODAK, V. V. Thermomechanically-controlled Processing
for Producing Ship-building Steels. Defence Science Journal, [s.l.], v. 55, n. 1, p.91-101, 1
jan. 2005. Defence Scientific Information and Documentation Centre.
BHADESHIA, H. K. D. H. Bainite in Steels- Transformations, Microstructure and
Properties. Book- Institute of Materials, [s.l.], 2ed, 2001.
BHADESHIA, H. K. D. H.; HONEYCOMBE, R. W. Steels: Microstructure and
Properties. 3. ed. [s.l.]: Butterworth-heinemann, 2006. 360 p.
BOUQUEREL, J. et al. Microstructure-based model for the static mechanical behaviour
of multiphase steels. Acta Materialia, [s.l.], v. 54, n. 6, p.1443-1456, abr. 2006.
CAMPOS, S. S. et al. Efeitos da Composição Química Sobre a Resistência Mecânica de
Aços Microligados Comerciais Processados em Laminador para Tiras a Quente. In:
SULMAT 2000 Congresso em Ciência de Materiais, 12-16, dez.2000, Joinville.
CASTRO, J. P. V. Caracterização Microestrutural e Mecânica do Aço API 5L X80 com
Distintos Projetos de Liga. 2015. 64 f. Dissertação (Mestrado) - Curso de Engenharia
Metalúrgica e de Materiais, Universidade Federal de Minas Gerais, Belo Horizonte, 2015. CHIOU, C.S. et al. The effect of prior compressive deformation of austenite on toughness
property in an ultra-low carbon bainitic steel. Materials Chemistry and Physics, [s.l.], v.
69, n. 1-3, p.113-124, 2001.
CHOI, B.W. et al. A nanoindentation study on the micromechanical characteristics of
API X100 pipeline steel. Metals And Materials International, [s.l.], v. 15, n. 3, p.373-378,
jun. 2009.
CUDDY, L. J. Grain Refinement of Nb Steels by Control of Recrystallization during Hot
Rolling. Metallurgical Transactions A, [s.l.], v. 15, n. 1, p.87-98, jan. 1984.
DeARDO, A. J. Fundamental Metallurgy of Niobium in Steel. Proceedings of the International Symposium Niobium 2001, Dec. 2-5, 2001, Florida, USA.
DÍAZ-FUENTES, M. et al. Analysis of different acicular ferrite microstructures in low-
carbon steels by electron backscattered diffraction. Study of their toughness behavior. Metallurgical And Materials Transactions A, [s.l.], v. 34, n. 11, p.2505-2516, 26
mar. 2003.
DINIZ, E. O. Análise da Influência do Nióbio na microestrutura e Propriedades
Mecânicas da Barra Chata Temperada e Revenida para Aplicações em Feixes de Mola.
2005. 85 f. Dissertação (Mestrado)- Curso de Pós-graduação em Engenharia Metalúrgica, Materiais e de Minas, Universidade Federal de Minas Gerais, Belo Horizonte, 2005.
85 FEREIDUNI, E.; BANADKOUKI, S.S.G. Reliability/unreliability of mixture rule in a low
alloy ferrite–martensite dual phase steel. Journal of Alloys and Compounds, [s.l.], v. 577,
p.351-359, nov. 2013.
GONG, J. et al. Compositional dependence of hardness of (Ce,Y)-TZP/Al2O3
composites. Materials Science And Engineering: A, [s.l.], v. 372, n. 1-2, p.207-212, maio
2004.
GORNI, A. A.; SILVEIRA, J H D. Resfriamento Acelerado De Chapas Grossas: O Futuro
Chegou. Revista Metalurgia & Materiais, [s.l.], v. 63, n. 564, p.103-105, mar. 2006.
GRAY, J. M. Welding of niobium microalloyed linepipe steels: 50 years of history and
experience. Proceedings of the International Seminar on Welding of High Strength Pipeline
Steels 2012, Dez. 2-5, 2013, Araxá, Brasil, 21p.
GRIMPE, F., et al. Development, production and application of heavy plates in grades up
to X120. In: 1st international conference Super-High Strength Steels, Rome, Italy, 2005, pp
2–4.
HILLERT, M. Thermodynamics of the massive transformation. Metallurgical Transactions A, [s.l.], v. 15, n. 3, p.411-419, mar. 1984.
HULKA, K.; GRAY, J. M. High Temperature Processing of Line Pipe Steels. Proceedings of the International Symposium Niobium 2001, Dez. 2-5, 2001, Flórida, USA, 26p.
ISASTI, N. et al. Modeling of CCT Diagrams and Ferrite Grain Size Prediction in Low
Carbon Nb–Mo Microalloyed Steels. ISIJ International, [s.l.], v. 55, n. 9, p.1963-1972,
2015.
KANG, J. et al. Phase Analysis of Steels by Grain-averaged EBSD Functions. ISIJ International, [s.l.], v. 51, n. 1, p.130-136, 2011.
KIM Y. M. et al. Transformation behavior and microstructural characteristics of
acicular ferrite in linepipe steels. Mater Sci Eng A 478(1):361–370. 2008.
KLINKENBERG, C. Niobium in Microalloyed Structural and Engineering
Steels. Materials Science Forum, Vancouver, vol. 539-543, jul. 2006.
KRAUSS, G.; THOMPSON, S. W. Ferritic Microstructures in Continuously Cooled Low-
and Ultralow-carbon Steels. ISIJ International, [s.l.], v. 35, n. 8, 1995.
KRAUSS, G. Steels: processing, structure and performance. Asm International, 2006. 605 p.
LAN, L. et al. Phase transformation, microstructure, and mechanical properties of X100
pipeline steels based on TMCP and HTP concepts. Journal of Materials Science, [s.l.], v.
86 LEE, Y. K. et al. Continuous Cooling Transformation Temperatures and
Microstructures of Niobium Bearing Microalloyed Steels. Materials Science Forum. Vols.
475-479. 2005.
MEYER, L. History of Niobiun as a Microalloying Element. Proceedings of the International Symposium Niobium 2001, Dez. 2-5, 2001, Flórida, USA, 19p.
MEYRICK, G. Steel: Physical Metallurgy of Steel Notes. [S.l.: s.n.], 2001. 174 p.
MINGARD, K.P. et al. Grain size measurement by EBSD in complex hot deformed metal
alloy microstructures. Journal of Microscopy, [s.l.], v. 227, n. 3, p.298-308, set. 2007.
MIRANDA, L. S. Estudo da Influência de Variáveis de Laminação em uma Linha de
Tiras a Quente Convencional nas Propriedades Mecânicas de um Aço Alto Nióbio da Classe API 5l x70. 2010. 91 f. Dissertação (Mestrado) - Curso de Pós-graduação em
Engenharia Metalúrgica, Materiais e de Minas, Universidade Federal de Minas Gerais, Belo Horizonte, 2010.
NISHIOKA, K.; ICHIKAWA, K. Progress in thermomechanical control of steel plates
and their commercialization. Science and Technology of Advanced Materials, [s.l.], v. 13,
n. 2, p.1-20, abr. 2012.
NOVIKIV, V. Concise Dictionary of Materials Science: Structure and Characterization
of Pollycristalline Materials. Flórida. 2003. 272p. CLC Press.
OGATA, P. H. Caracterização Microestrutural do Aço para Tubo API 5L- X65 em
Diferentes Regiões da Chapa como Laminada e Após Austenitização e Resfriamento sob Diversas taxas de resfriamento. 2009. 122 folhas. Dissertação (Mestrado)- Engenharia
Metalúrgica e de Materiais. Escola Politécnica da Universidade de São Paulo. São Paulo. 2009.
OUCHI, C. Advances in Physical Metallurgy and Processing of Steels. Development of
Steel Plates by Intensive Use of TMCP and Direct Quenching Processes. ISIJ
International, [s.l.], v. 41, n. 6, p.542-553, 2001.
PARK, G. T. et al. Effect of microstructure on the hydrogen trapping efficiency and
hydrogen induced cracking of linepipe steel. Corrosion Science, [s.l.], v. 50, n. 7, 2008.
Elsevier BV.
RANDLE, V. Electron backscatter diffraction: Strategies for reliable data acquisition
and processing. Materials Characterization, [s.l.], v. 60, n. 9, p.913-922, set. 2009.
RAMÍREZ, M. F. G. Estudo da Transformação Durante o Resfriamento Contínuo e da
Microestrutura do Aço Microligado X80 Utilizado na Construção de Tubos para Transporte de Petróleo e Gás Natural. 2008. 159 folhas. Dissertação (Mestrado)-
Engenharia Metalúrgica e de Materiais. Escola Politécnica da Universidade de São Paulo. São Paulo. 2008.
87 RETHINAM, A. et al. Grain refinement of C-Mn steel through thermo-mechanical
processing. Journal of Engineering, Design and Technology, [s.l.], v. 13, n. 2, p.282-297, 5
maio 2015.
RYDE, L. Application of EBSD to analysis of microstructures in commercial
steels. Materials Science and Technology, [s.l.], v. 22, n. 11, p.1297-1306, nov. 2006.
SHRESTHA, S. L. et al. An automated method of quantifying ferrite microstructures
using electron backscatter diffraction (EBSD) data. Ultramicroscopy, [s.l.], v. 137, p.40-
47, fev. 2014.
SICILIANO, F. Materiais para Gasodutos: Aços de Alta Resistência para Dutos de
Transporte de Gás e Petróleo - Tendências Atuais. Metalurgia & Materiais. São Paulo:
Vol. 64, Nº. 588, Mai. 2008.
SILVA, E. C. Correlação entre os métodos tradicionais de quantificação de fases e o
método que utiliza o sistema de análise de imagens em aços ao carbono comum. 1997.
130 f. Tese (Doutorado) - Curso de Ciência e Engenharia de Materiais, Universidade de São Paulo, São Carlos, 1997.
STALHEIM. D. G. The Use of High Temperature Processing (HTP) Steel for High Strength
Oil and Gas Transmission Pipeline Applications. Proceedings of the Joint International
Conference of HSLA Steels, 2005, Nov., 2005, Sanya, China, 6p.
STALHEIM, D. G.; BARNES, K. R.; McCUTCHEON, D.B. Alloy designs for high
strength oil and gas transmission linepipe steels. Proceedings of the International
Symposium on Microalloyed Steel for the Oil and Gas Industry, 2006, Jan. 23-26, 2006, Araxá, Brasil, 35p.
SUBRUMANIAN, S. V.; ZUROB, H. S.; ZHU, G. Recrystallization Control to Obtain
Uniform Fine Grain Size in Hot Rolling of HTP Steel. Proceedings of the International
Symposium on Microalloyed Steel for the Oil and Gas Industry, 2006, Jan. 23-26, 2006, Araxá, Brasil, 16p.
SUIKKANEN, P. Development and Processing of Low Carbon Bainitic Steels. 2009. 486 f. Tese (Doutorado)- Engenharia Mecânica, Faculdade de Tecnologia da Universidade de Oulu, Linnanmaa, 2009.
SUZUKI, S. Niobium in Structural Steels. Proceedings of Niobium Bearing Structural
Steels, 2010, Mar. 9-11, 2010, Nova Deli, Índia, 30p.
TURAZI, A. Estudo de Diferentes Rotas de Processamento para Refino de Grão e Seu
Efeito na Estampabilidade de Aços ARBL. 2008. 107 f. Dissertação (Mestrado) - Curso de
Pós Graduação em Ciência e Engenharia de Materiais, Universidade Federal de Santa Catarina, Florianópolis, 2008.
UNDERWOOD, E. E. Quantitative Metallography. In: American Society for Metals. Metals Handbook. 1995. 9 ed. v. 9. 123-134.
88 WANG, W.; SHAN, Y.; YANG, K. Study of high strength pipeline steels with different
microstructures. Materials Science And Engineering: A, [s.l.], v. 502, n. 1-2, p.38-44, fev.
2009.
WILSON, E. A. The γ→α Transformation in Low Carbon Irons. ISIJ International, [s.l.], v. 34, n. 8, p.615-630, 1994.
WRIGHT, S.I. Quantification of recrystallized fraction from orientation imaging scans. In Proceedings of the Twelfth International Conference on Textures of Materials, Szpunar, J.A. pp. 104–109, 1999. Ottawa, Ontario, Canada.
WRIGHT, S. I. et al. A Review of Strain Analysis Using Electron Backscatter
Diffraction. Microscopy And Microanalysis, [s.l.], v. 17, n. 03, p.316-329, 22 mar. 2011.
WU, J. et al. Image Quality Analysis: A New Method of Characterizing
Microstructures. ISIJ International, [s.l.], v. 45, n. 2, p.254-262, 2004.
WU, K.M. Three-dimensional analysis of acicular ferrite in a low-carbon steel containing
titanium. Scripta Materialia, [s.l.], v. 54, n. 4, p.569-574, fev. 2006.
YOSHIE, A.; SASAKI, J. Recent Development of Niobium Bearing Structural Steels for
Ships and Infrastructures in Nippon Steel. Proceedings of Niobium Bearing Structural
Steels, 2010, Mar. 9-11, 2010, Nova Deli, Índia, 17p.
ZAEFFERER, S. et al. EBSD as a tool to identify and quantify bainite and ferrite in low-
alloyed Al-TRIP steels. Journal of Microscopy, [s.l.], v. 230, n. 3, p.499-508, jun. 2008.
Wiley-Blackwell.
ZAJAC, S.; SCHWINN, V.; TACKE, K. H. Characterisation and Quantification of
Complex Bainitic Microstructures in High and Ultra-High Strength Linepipe Steels. Materials Science Forum, [s.l.], v. 500-501, 2005. Trans Tech Publications.
ZHAO, M. et al. Continuous cooling transformation of undeformed and deformed low
carbon pipeline steels. Materials Science And Engineering: A, [s.l.], v. 355, n. 1-2, p.126-
136, ago. 2003.
ZHAO, H. et al. A phase quantification method based on EBSD data for a continuously
cooled microalloyed steel. Materials Characterization, [s.l.], v. 123, p.339-348, jan. 2017.
ZHU, K. et al. T. Characterization and quantification methods of complex BCC matrix
microstructures in advanced high strength steels. Journal of Materials Science, [s.l.], v. 48,
n. 1, p.413-423, 25 ago. 2012.
ZHOU, W., WANG, Z. L. Scanning Microscopy for Nanotechnology: Techniques and