Sugestões de futuros trabalhos é apresentada no sentido de complementar a tese desenvolvida.
• Processamento de espécimes constituídos das fases individuais do laminado híbrido TiGra, ou seja, metálica-Ti e compósita PEEK/Gra, e comparação experimental e analítica (e.g., empregando-se a Regra das Misturas) ao comportamento mecânico translaminar, sob carregamentos quase-estático e dinâmico (impacto), do LMF-TiGra ora caracterizado;
• Realização de uma análise fratográfica mais aprofundada e detalhada quanto aos micromecanismos de fratura envolvidos
REFERÊNCIAS
ABDULLAH, M.R.; CANTWELL, W.J. The impact resistance of fiber-metal laminates based on glass fiber reinforced polypropylene. Polymer Composites, v.27, n.6, p.700- 708, 2006.
ABDUSSALAM, S.R.; AYARI, M.L. Experimental study of fracture toughness and energy in composite materials. Mechanical of Composite Materials, v.34, n.13, p.243- 249, 1998.
ABRATE, S. Impact on laminated composite materials: recent advances. Applied
Mechanics Review, v.47, n.11, p.517-544, 1991.
ACHACAR, J.A.; RODRIGUES, J. Introdução à estatística para ciência e tecnologia. São Paulo: Editora USP, 2000.
AGARWAL, B.D.; BROUTMAN, L.J. Analysis and performance of fiber composites. 2nd ed., Hoboken, NJ, USA: John Wiley & Sons Inc., 1990. 578p.
ALDERLIESTEN, R.C. Fatigue and damage tolerance of Glare, Applied Composite
Materials, v.10, p.223-242, 2003.
ALDERLIESTEN, R.C. Fatigue and damage tolerance issues of Glare in aircraft structures. Internatonal Journal of Fatigue, v.28, p.1116-1123, 2006.
ALVES, M.; CHAVES, C.; BIRCH, R.S. Impact on aircraft, In: 17th Brazilian Congress on Mechanical Engineering, São Paulo, SP, 2003.
AMERICAN SOCIETY FOR TESTING AND MATERIALS. Designation ASTM D6110-
04 - Standard test method for determining the Charpy impact resistance of notched
specimens of plastics. West Conshohocken: United States. 2005.
AMERICAN SOCIETY FOR TESTING AND MATERIALS. Designation ASTM D7264-
07 - Standard test method for flexural properties of polymer matrix composite
materials. West Conshohocken: United States. 2007.
AMERICAN SOCIETY FOR TESTING AND MATERIALS. Designation ASTM E23-04
- Standard test methods for notched bar impact testing of metallic materials. West
AMERICAN SOCIETY FOR TESTING AND MATERIALS. Designation ASTM E399-
97 - Standard test method for plane-strain fracture toughness of metallic materials.
West Conshohocken: United States. 2005.
AMERICAN SOCIETY FOR TESTING AND MATERIALS. Designation ASTM E1820
- Standard test methods for measurement of ftacture toughness. West
Conshohocken: United States. 2005.
ANDERSON, T.L. Fracture mechanics: fundamentals and application. 2nd ed. Boca Raton, FL, USA: CRC Press, 688p, 1995.
ANGAMUTHU, K.; GUHA, B.; ACHAR, D.R.G. Investigation of dynamic fracture toughness (JId) behavior of strength mismatched Q & T steel weldments using
instrumented Charpy impact testing. Engineering Fracture Mechanics, v.64, n.4, p.417-432, 1999.
ASKELAND, D.R. The science and engineering of materials. 3rd ed. Boston, MA, USA: PWS Publishing Company., 812p, 1994.
ATAS, C. An experimental investigation on the impact response of fiberglass/aluminum composites. Journal of Reinforced Plastics and Composites, v.4, p.45-52, 2007.
ATTFC - COMMITTEE ON AERONAUTICAL TECHNOLOGIES. Aeronautics and Space Engineering Board. Commission on Engineering and Technical System, National Research Council. Aeronautical Technologies for the Twenty-First Century, Washington, D.C.: National Academy Press, 1992. 314p. Disponível em: <http://books.nap.edu/books/ 0309047323/html>. Acesso em: Julho 2008.
AVIATION SAFETY, 1985. Disponível em: <http://aviation-safety.net/database /record.php?id=19850812-1>. Acesso em: Setembro 2007.
AVIATION SAFETY, 1992. Disponível em: <http://aviation-safety.net/ database/ record.php?id=20020525-0>. Acesso em: Setembro 2007.
BEUMLER, T. Fiber metal laminates - a family concept, In: 9th International Fatigue
BEUMLER T. Controlling the damage with fiber metal laminate structures, In: First
International Conference on Damage Tolerance of Aircraft Structures, Delft,
Netherlands, 2007.
BLANCO, N.; PINHO, S.T.; ROBINSON, P. Design and analysis of a compact tension (CT) specimen for intralaminar fracture toughness characterization of woven composite laminates. Disponível em: <http://extra.ivf.se/eccm13_programme
/abstracts/810.pdf>. Acesso em: Dezembro de 2008.
BOTELHO, E.C.; SILVA, R.A.; PARDINI, L.C.; REZENDE, M.C. A review on the development and properties of continuous fiber/epoxy/aluminum hybrid composites for aircraft structures. Materials Research, v.9, p.247-256, 2006.
BURIANEK, D.A.; SPEARING, S.M. Delamination growth from face sheet seams in cross-ply titanium/graphite hybrid laminates. Composite Science & Technology, v.61, n.2, p.261-269, 2001.
BURIANEK, D.A.; SPEARING, S.M. Fatigue damage in titanium-graphite hybrid laminates. Composite Science & Technology, v.62, n.5, p.607-617, 2002.
BURIANEK, D.A.; SPEARING, S.M. Modeling of facesheet crack growth in titanium- graphite hybrid laminates. Part II: Experimental results. Engineering Fracture
Mechanics, v.70, n.6, p.799-812, 2003.
BURZIC, Z. et al. The effect of fiber orientation on impact toughness and fracture properties of carbon fiber-epoxy composite,Institute for Materials Testing, Belgrade, 1990.
BURZIC, Z. The effect of fiber orientation on impact toughness and fracture properties of carbon fiber-epoxy composite, In: Charpy Centenary Conference, Poitiers, France, v.2, p.53-59, 2001.
CAMPBELL, J.P.; VENKATESWARA, R.; RITCHIE, R.O. The effect of microstructure on fracture toughness and fatigue crack growth behaviour in γ-titanium aluminide based intermetallics. Metallurgical & Materials Transactions A, v.30, p.563-577, 1999.
CARRILLO, J.G.; CANTWELL, W.J. Scaling effects in the low velocity impact response of fiber-metal laminates, Journal of Reinforced Plastics and Composites, v.27, n.9, p.893-907, 2008.
CASTRODEZA, E.M.; IPINA, J. E. P.; BASTIAN, F. L. Experimental techniques for fracture instability toughness determination of unidirectional fiber metal laminates.
Fatigue & Fracture of Engineering Materials & Structures, v.25, n.11, p.999-1008,
2002a.
CASTRODEZA, E.M.; TOUÇA J.M.R.; IPINA, J. E. P.; BASTIAN, F. L. Determination of CTODc in fibre metal laminates by ASTM and Schwalbe Methods. Materials Research, v.5, n.2, p.119-124, 2002b.
CHAN, K.S.; SHIH, D.S. Fatigue and fracture behavior of a fine-grained lamellar TiAl alloy. Metallurgical & Materials Transaction A., v.28, p.79-91, 1997a.
CHAN, K.S.; DAVIDSON, D.L.; ANTON, D.L. Fracture toughness and fatigue crack growth in rapidly quenched Nb-Cr-Ti in situ composites. Metallurgical & Materials Transactions A, v.28, p.1797-1808, 1997b.
CHAN, K.S.; SHIH, D.S. Fundamental aspects of fatigue and fracture in a TiAl sheet alloy. Metallurgical & Materials Transactions A, v.29, p.73-84, 1998.
COBB, T.Q. et al. Optimization of surface treatment and adhesion selection for bond durability in Ti-15-3 laminates. Journal of Adhesion, v.71, n.2-3, p.115-141, 1999. CORTÉS, P.; CANTWELL, W.J. Interfacial Fracture Properties of Carbon Fiber Reinforced PEEK/Titanium Fiber-Metal Laminates. Journal of Materials Science
Letters, v.21, n.23, p.1819-1823, 2002.
CORTÉS, P.; CANTWELL, W.J. The tensile and fatigue properties of carbon fibre reinforced PEEK/titanium fibre-metal laminates. Journal Reinforced Plastic and
Composites, v.23, n. 15, p.1615-1624, 2004.
CORTÉS P., CANTWELL W.J. The impact properties of high-temperature fiber-metal laminates, Journal of Composite Materials, v.41, n.5, p.613-632, 2007.
COSTA, A. F. B.; EPPRECHT, E. K.; CARPINETTI, L. C. R. Controle estatístico de
qualidade. São Paulo: Editora Atlas, 34p, 2004.
DATTA, S.; KRISHNA, A.V.; RAO, R.M.V.G.K. Low velocity impact damage tolerance studies on glass-epoxy laminates - effects of material, process and test parameters.
Journal of Reinforced Plastics and Composites, v.23, p.327-345, 2004.
DAVIDSON, D.L.; Chan, K.S. The fatigue and fracture resistance of a Nb-Cr-Ti-Al alloy. Metallurgical & Materials Transactions A, v.30, p.2007-2015, 1999.
DAVIDSON, D.L.; CHAN, K.S.; LOLOEE, R.; CRIMP, M.A. Fatigue and fracture toughness of a Nb-Ti-Cr-Al-X single-phase alloy at ambient temperature. Metallurgical & Materials Transactions A, v.31, n.4, p.1075-1084, 2000.
DOT/FAA/AR-03/37 - U.S. Department of Transportation, Federal Aviation Administration, Office of Aviation Research and Development, Advanced Aircraft
Materials - Engine Debris Penetration Testing, Final Report, Washington, D.C.
20591, 2005.
DROP TOWER: Disponível em: <http://www.mpmtechnologies.com/Drop- Tower.htm>. Acesso em: Dezembro 2007.
EL-HAJJAR, R.F.; HAJ-ALI, R.M. A quantitative thermoelastic stress analysis method for pultruded composites. Composites Science and Tecnology, v. 63, n. 7, p. 967- 978, 2003.
EL-HAJJAR, R.F.; HAJ-ALI, R.M.; ZUREICK, A.H. Fracture toughness and crack growth in FRP pultruded composites. In: 16th Engineering Mechanics Conference, Seattle, 2003.
FAA: Disponível em: <http://www.faa.gov>. Acesso em: Abril 2007.
FATT, M.S.H. Ballistic impact of Glare fiber-metal laminates. Composite Structure. v.61, p.73-88, 2003.
FERNÁNDEZ-CANTELI, A.; ARGUELLES, A.; VINA, J.; RAMULU, M.; KOBAYASHI, A.S. Dynamic fracture toughness measurements in composites by instrumented Charpy testing: influence of aging. Composite Science & Technology, v.62, n.10-11, p.1315-1325, 2002.
FINK, A.; KOLESNIKOV, B. Hybrid titanium composite material improving composite structure coupling. Institute of Composite Structures and Adaptive Systems, 38104 Braunschweig, Germany, 2005.
FSF-FLIGHT SAFETY FUNDATION Ineffective tail-strike repair preceded Boeing 747 breakup. Accident Prevention, v.62, n.5, 2005.
FREITAS, M.;REIS, L. Failure mechanisms on composite specimens subjected to compression after impact, Composite Structures, v.42, p.365-373, 1998.
FU, S.Y.; LAUKE, B.; MADER, E.; HU, X.; YUE, C.Y. Fracture resistance of short- carbon-fiber-reinforced polypropylene under Charpy impact load and its dependence on processing. Journal of Materials Processing Technology, v.89-90, p.501-507, 1999.
GATTI, M.C.A., Silva, R.V. da, Tarpani, J.R. Análise térmica do laminado PEEK/carbono submetido a diferentes rotas de processamento. Revista Matéria, vol.11, n.3, p. 332-339, 2006.
GRAVILLE, B.A.; ROTHWELL, A.B. Effect of Niobium on HAZ toughness using the instrumented Charpy test. Metal Construction, p.455-456, Oct. 1977.
GUALBERTO, A.R.M. Propriedades Mecânicas residuais de laminados híbridos metal-fibra submetidos a impacto único e repetido. In: Congresso da Associação Brasileira de Metalurgia e Materiais, Vitória, ES, 2007.
GUALBERTO, A.R.M.; GATTI, M.C.A.; TARPANI J.R. Resistência e tolerância a impacto transversal de baixa energia de um laminado híbrido metal/fibra. Revista
Matéria, v. 14, p. 795-813, 2009.
GUNNINK, J.W. Glare Technology Development 1997-2000. Applied Composite
Materials, v. 54, p.201-219, 2002.
GWEON, S.Y. Damage in carbon-fibre composites due to repetitive low-velocity impact loads. Journal Materials Science, v.27, p.2035-2047, 1992.
HALLl, R.B.; HAGER, J.W. Perfomance limits for stiff ness-oritical graphitics foam structures. Part I: Comparison with high-modulus foams, refractory alloys and graphite-epoxy composite. Journal of Composite Materials, v.30, n.17, p.1922-1937, 1996.
HARARIPRASAD, S.; SASTRY, S.M.L.; JERINA, K.L. Fatigue crack growth rates and fracture toughness of rapidly solidified Al-8.5 pct Fe-1.2 pct V-1.7 pct Si alloys.
HEBSUR, M.G. Impact resistance of lightweight hybrid structures for gas turbine engine fan containment applications. Journal Materials Engineering, v.12, p.470-479, 2003.
HONG, S. On the relationship between impact energy and delamination area.
Experimental Mechanics, v.55, p.115-120, 1989.
HOSKIN, B.C.; BAKER, A.A. Composite materials for aircraft structures. American Institute of Aeronautics and Astronautics (Education Series), 630p, 1986.
HOSSEINZADEH, R. Damage behavior of fiber reinforced composite plates subjected to drop weight impacts. Composite Science & Technology, v.66, p.61-68, 2006.
ICACA - COMMITTEE ON AIRCRAFT CERTIFICATION SAFETY MANAGEMENT. Aeronautics and Space Engineering Board. Commission on Engineering and Technical System, National Research Council, Improving the Continued
Airworthiness of Civil Aircraft: A Strategy for the FAA’s Aircraft Certification Service -,
86p, 1998. Disponível em: <http://www.nap.edu/catalog.php?record_id=6265>. Acesso em: Julho 2006.
ISHIKAWA, T. et al. Some experimental findings in compression-after-impact (CAI) tests of CF/PEEK (APC-2) and conventional CF/epoxy flat plates. Composites
Science & Technology, v.55, p.349-363, 1995.
JANG, B.P. Repeated impact failure of continuous fiber reinforced thermoplastic and thermoset composites. Journal Composite Materials, v.25, p.1171-1203, 1991.
JANG-kYO, K. Application of carbon/PEEK composite, 2nd International Bhurban
Conference on Apllied Sciences and Technology, Bhurban, Pakistan, June 16-21,
2003.
JIAN, F.; FULIAN, D.; CHENGZHONG, W. Experimental study on the material dynamic fracture properties by instrumented Charpy impact test with single specimen method. Journal Physique IV, France, v.110, n.1, p. 551-557, 2003.
KALTHOFF, J.F. Characterization of the dynamic failure behaviour of a glass- fiber/vinyl-ester at different temperatures by means of instrumented Charpy impact testing. Composites Part B, v.35, n.6-8, p.657-663, 2004.
KOBAYASHI, T. Analysis of impact properties of A533 steel for nuclear reactor pressure vessel by instrumented Charpy test. Engineering Fracture Mechanics, v.19, n.1, p.49-65, 1984.
KOBAYASHI, T.; YAMAMOTO, I.; NIINOMI, M. On the accuracy of measurement of dynamic elastic-plastic fracture toughness parameters by the instrumented Charpy test. Engineering Fracture Mechanics, v.26, n.1, p.83-94, 1987.
KOBAYASHI, T.; YAMAMOTO, I.; NIINOMI, M. Introduction of a new dynamic fracture toughness evaluation system. Journal of Testing & Evaluation, v.21, n.3, p.145-153, 1993.
KUANG K.S.C., CANTWELL W.J. Detection of impact damage in thermoplastic- based fiber-metal laminates using optical fiber sensors, Journal of Materials Science
Letters, v.21, n.17, p.1351-1354, 2002.
LALIBERTÉ, J.F Applications of fiber-metal laminates. Polymer Composite, v.21, p.558-567, 2000.
LANDES, J.D.; BEGLEY J.A. Test results from J-integral studies – attempt to establish a JIc testing procedure. Fracture analysis, ASTM STP560, p.170-186, 1974.
LANGDON, G.S. Failure characterisation of blast-loaded fibre-metal laminate panels based on aluminium and glass-fibre reinforced polypropylene. Composite Science &
Technology, v.67, p.1385-1405, 2007a.
LANGDON, G.S. Behaviour of fibre-metal laminates subjected to localised blast loading: part I-experimental observations. Int. Journal Impact Engineering, v.34, p.1202-1222, 2007b.
LI, E.; JOHNSON, W.S. An investigation into the fatigue of a hybrid titanium composite laminate. Journal of Composites & Technological Research, v.20, n.1, p.3- 12, 1998.
LIN, C. Perforation of composite plates and sandwich panels under quasi-static and projectile loading. Journal Composite Materials, v.40, p.1801-1840, 2006.
LIU, D.; RAJU, B.B.; DANG, X. Size effects on impact response of composite laminates. International Journal of Impact Engineering, v.21, n.10, p.837-854, 1998.
LIU, Y.; LV, L.; SUN, B.; HU, H.; GU, B. Dynamic response of 3D biaxial spacer weft- knitted composite under transverse impact. Journal of Reinforced Plastics and
Composites, v.25, n.15, p.16-1641, 2006.
LIU, Y.; GU, B. Transverse impact damage and energy absorption of three- dimensional orthogonal hybrid woven composite: experimental and FEM simulation.
Journal of Composite Materials, v.42, n.17, p.1763-1786, 2008.
MAHANTA, B.B.; CHAKRABORTY, D.; DUTTA, A. Accurate prediction of delamination in FRP composite laminates resulting from transverse impact.
Composites Science and Technology, v.64, n.15, p.2341-2351, 2004a.
MAHANTA, B.B. et al. Reliable computation of contact force in FRP composite laminates under transverse impact Shock and Vibration, v.11, n.2, p.129-142, 2004b. MAHMOOD, T.T. et al. Dynamic strain-aging and neutron irradiation effects on mechanical and fracture properties of A533B class 1 PV steel and 2.25Cr-1Mo steel.
Journal of Testing & Evaluation, v.18, n.5, p.332-337, 1990.
MARTIN, R; EVANS, D. Reducing costs in aircraft: the metals affordability initiative consortium. Journal of the Minerals, Metals and Materials – JOM, v.52, n.3, p.24-28, 2000.
MASTERS, J.E. Translaminar fracture toughness of a composite wing skin made of stitched warp-knit fabric. NASA Contractor Report 201728, 30p. 1997.
McCARTHY, A. Modelling of bird strike on an aircraft wing leading edge made from fibre metal laminates: part 1-material modeling. Applied Composite Materias, v.11, p.295-315, 2004.
MINNETYAN L.; CHAMIS C.C. The C(T) specimen in laminated composite testing.
NASA Technical Memorandum 4712, 1996.
MINNETYAN L.; CHAMIS C.C. Prediction of composite laminate fracture:
micromechanics and progressive fracture. Disponível em:
<http://ntrs.nasa.gov/search.jsp?R=776873&id=7&as=false&or=false&qs=Ns3DHarv estDate%257c1%26N%3D4294802681>. Acesso em: Agosto 2007.
MOORE A.M.B.; SILVA, J.F.; VIEIRA, P. Mode II fracture toughness of glass fibre
reinforced composites. Portuguese Conference on Fracture, 8, Portugal, Vila Real,
20-22 February, 2002.
MOORE, D.R.; SEFERIS, J.C. Toughness characterization of carbon fibre/polyether ether ketone (CF/PEEK) laminates, Pure & Applied Chemistry, v.63, n.11, p.1609- 1625, 1991.
MRAAAI - COMMITTEE ON AERONAUTICAL TECHNOLOGIES. Aeronautics and Space Engineering Board. Commission on Engineering and Technical Systems, National Research Council. Materials Research Agenda for the Automotive and
Aircraft Industries –. Washington, D.C.: National Academy Press, 1993. 84p.
Disponível em: <http://books.nap.edu/openbook.php?record_id=2244&page=R1>. Acesso em: Agosto 2008.
MORITA, S.; HOSOI, K.; KOBAYASHI, T. Instrumented impact testing load of
polymers. Department of Production Systems Engineering, Toyohashi University of
Technology, Japan, 2002. p.441-8580.
MSPC: Disponível em: <http://www.mspc.eng.br/ciemat/cie_mat1A.asp# ens_impact>. Acesso em: Novembro 2007.
MURPHY, G.C. Processing for an improved impact resistant composite blade, AIAA-
1981-1356 SAE / ASME 17th Joint Propulsion Conference, Colorado Springs, CO,
9p, 1981.
NASA Contractor Report 187545. NASA HIGH-SPEED CIVIL TRANSPORT
STUDIES, 1991.
NASA Report to the Congress. Impact of the termination of NASA’s High speed
research program and the redirection of NASA’s advanced subsonic technology program, 2000.
NASA/TM-2000-210547. Research opportunities in advanced aerospace concepts.
Disponível em: <http://techreports.larc.nasa.gov/ltrs/pdf/2000/tm/>. Acesso em: Junho de 2007a.
NASA Facts Online. Disponível em: http://hsr.larc.nasa.gov/ Fact Sheets/HSR-
NTSB - NATIONAL TRANSPORTATION SAFETY BOARD - Order N°. EA- 4582, Washington, DC, 1997. Disponível em: <http://www.google.com.br/search?hl=pt- BR&q=faa+Airplane+Airworthiness+tail+strike&meta=>. Acesso em: Setembro 2007. e <http://www.google.com.br/search?hl=pt-BR&q=faa+Airplane+Airworthiness+ tail+ strike&start=10&sa=N>. Acesso em: Setembro 2009.
NMNGCT - COMMITTEE ON NEW MATERIALS FOR ADVANCED CIVIL AIRCRAFT. Aeronautics and Space Engineering Board. Commission on Engineering and Technical Systems, National Research Council. New Materials for Next-
Generation Commercial Transports, Washington, D.C.: National Academy Press,
1996. 88p. Disponível em: <http://books.nap.edu/books/0309053900/html p.88>. Acesso em: Agosto 2007.
PAIVA, et al. Avaliação da temperatura de transição vítrea de compósitos poliméricos reparados de uso aeronáutico. Polímeros, v.16, n.1. São Carlos Jan/Mar, 2006.
PELLENKOFT, F. Experimental and analytical investigations on the crack initiation and crack propagation behaviour of mechanically fastened FML joints, In: First
International Conference on Damage Tolerance of Aircraft Structures, Delft, The
Netherlands, 2007.
RICE, J.R. A Path independent Integral and the approximate analysis of strain concentration by notches and cracks. Journal of Applied Mechanics, v.5, p.379-386, 1973.
ROB PHOTOS: Disponível em: <http://w1.rob.com/pix/oops?page=1-1000>. Acesso em: Novembro 2007.
ROEBROEKS, G.H.J.J. Fiber-metal laminates - recent developments and applications. Fatigue, v.16, p.33-42, 2002.
ROMAN, I.; HAREL, H.; MARON, G. Stress intensity factor measurements in composite laminates with various notch configurations. Polymer Composites, v.2, n.4, p.199-203, 2004.
ROOIJEN, R.V., Property optimization in fibre metal laminates. Applied Composite
Materials, v.11, p.63-76, 2004.
SENATOROVA, O.G. Features of Al laminate behavior at fatigue loading. Materials
SERVER, W.L. General yielding of Charpy v-notch and pre-cracked charpy specimens. Journal of Engineering Materials and Technology, v.100, p.183-188, 1978.
SHIN, C.S.; WANG, C.M. A comparison of as-fatigue and re-consolidation residual properties for notched quasi-isotropic [0/45/90/-45]2S and cross-ply [0/90]4S
AS4/PEEK composite laminates. Composites: Part A, v.33, p.1519-1528, 2002. SHTERENLIKHT, A.; HASHEMI, H.S. Assessment of an instrumented Charpy impact machine. International Journal of Fracture, v.132, n.1, p.81-97, 2005.
SOARES; H. N. Monitoramento por raios-x de trincas de fadiga em juntas rebitadas
de um laminado híbrido metal fibra Glare. 118p., Dissertação de Mestrado - Escola
de Engenharia de São Carlos, Instituto de Física de São Carlos, Instituto de Química de São Carlos, Universidade de São Paulo, São Paulo, 2007.
SAIB - SPECIAL AIRWORTHINESS INFORMATION BULLETIN, FAA Aircraft Certification Service, Washington, DC, U.S Department of Transportation, Federal Aviation Administration, N° CE 04-34, 2003. Disponível em: <http://www.google.com.br/search?hl=pt-BR&q=faa+Airplane+Airworthiness+tail+ strike&meta=>. Acesso em: Setembro 2007. e <http://www.google.com. br/search?hl=pt-BR&q=faa+Airplane+Airworthiness+tail+ strike&start=10&sa=N>. Acesso em: Setembro 2009.
SAIB - SPECIAL AIRWORTHINESS INFORMATION BULLETIN, FAA Aircraft Certification Service, Stabilizer: True Flight (Grumman American) AA-5, Washington, DC, U.S Department of Transportation, Federal Aviation Administration, N° CE 09- 37, 2009. Disponível em: <http://www.google.com.br/search?hl=pt- BR&q=faa+Airplane+Airworthiness+tail+strike&meta=>. Acesso em: Setembro 2007. e <http://www.google.com.br/search?hl=pt-BR&q=faa+Airplane+Airworthiness+tail+ strike&start=10&sa=N>. Acesso em: Setembro 2009.
SMITH, W.F. Princípios de Ciências e Engenharia de Materiais, Editora Mc Graw Hill, 3 ed. 1998.
SPIEGEL, M.R. Estatística. São Paulo: Editora Mc Graw Hill do Brasil Ltda, 1970. STICKLER, P.B. Composite materials for commercial transport-issues and future research direction, 17th ASC Technical Conference, C.T. Sun Ed., Seattle, 2002. STORK-FORK-FOKKER: Disponível em: <http://www.storkaerospace.com/fokker/ page.html?ch=DEF&id=5801>. Acesso em: Outubro 2007.
SWAIN, R.E.; BAKIS, C.E.; REIFSNIDER, K.L. Effect of interleaves on the damage mechanisms and residual strength of notched composite laminates subjected to axial fatigue loading. Composite materials: fatigue and fracture, ASTM STP1156, p.552- 574, 1993.
TARPANI, J.R. et al. Fadiga após múltiplos impactos em laminados carbono-epóxi.
Tecnologia em Metalurgia e Materiais, v.2, n.4, p.63-70, 2006a.
TARPANI, J.R Fadiga após múltiplos impactos em laminados carbono-epóxi. Tecnologia em Metalurgia e Materiais, Associação Brasileira de Metalurgia e Materiais (ABM), v.2, p.63-70, 2006b.
TARPANI, J.R. et al. Mechanical performance of carbon-epoxy laminates - part I: quasi-static and impact bending properties. Materials Research, v.9, n.2, p.119-124, 2006c.
TARPANI, J.R. et al. Mechanical performance of carbon-epoxy laminates - part II: quasi-static and fatigue tensile properties. Materials Research, v.9, p.125-134, 2006d.
TARPANI, J.R. Low-to-medium cycle fatigue life of Glare-5 and aluminum alloy 2024- T3. In: 9th International Fatigue Congress, Atlanta-GA, USA, 2006d.
TARPANI, J.R. Tenacidade ao impacto Charpy de materiais de construção aeronáutica, Tese de Livre-Docência, Escola de Engenharia de São Carlos, Universidade de São Paulo, 2008.
TITA, V. A Study of the Dynamic Behavior for Low Velocity Impact on Thin Composite Laminates, In: XII International Symposium on Dynamic Problems of
Mechanics, Ilhabela-SP, Brazil, 2007.
TOUÇA, J.M.R.; BASTIAN, F.L. Fratura de materiais compósitos utilizados no reparo de dutos. Petro & Química, v.253, p.99-102, 2003.
TOUÇA, J.M.R.; CASTRODEZA, E.M.; BASTIAN, F.L. Tenacidade à fratura de materiais compósitos de matriz polimérica para reparo de dutos de aço. In: 61° Congresso da Associação Brasileira de Metalurgia e Materiais, Rio de Janeiro,
TOUÇA, J.M.R.; CASTRODEZA, E.M.; BASTIAN, F.L. Estudo do comportamento em fratura de materiais compósitos para reparo de dutos de aço. Tecnologia em
Metalurgia e Materiais, v.3, n.2, p.50-54, 2006b.
TOWERS O.L., GARWOOD S.J. Maximum load toughness. International Journal of
Fracture, v.16, p.85, 1980.
TRONSKAR, J.P. Measurement of fracture initiation toughness and crack resistance.
Engineering Fracture Mechanics, v.69, n.3, p.321-338, 2002.
TZENG, J.; EMERSON, R.; MOY, P. Composite Flywheel development for energy storage. Army Research Laboratory ARL-TR-3388, 2005.
UNDERWOOD, J.H, KORTSCHOT M.T. Notch-tip damage and translaminar fracture toughness measurements from carbon-epoxy laminates. Report Number A101.082, US Army Armament Research, Development and Engineering Center, Watervliet, N.Y., 19 p, 1994.
UNDERWOOD, J.H, KORTSCHOT M.T., LLOYD W.R., EIDINOFF H.L., WILSON, D.A. Translaminar fracture toughness test methods and results from interlaboratory tests of carbon/epoxy laminates. Report Number A427.492, US Army Armament Research, Development and Engineering Center, Watervliet, N.Y., 12 p, 1995.
USSCA - COMMITTEE ON HIGH SPEED RESEARCH. Aeronautics and Space