O presente estudo deu origem a discussões que poderão, num futuro bem próximo, incentivar pesquisadores a analisarem outras variáveis dos procedimentos laboratoriais protéticos. Neste sentido, sugere-se os seguintes pontos temáticos para futuros trabalhos:
¾ Analisar, em saliva artificial, as ligas de níquel-cromo que passaram por refusões, visando simular as condições orais;
¾ Realizar outros ensaios mecânicos para análise da adesão metal/porcelana; ¾ Variar a temperatura inicial de sinterização da porcelana;
Referências
ALEXANDRE, V.G. Avaliação comparativa da desadaptação marginal das coroas
metalo-cerâmicas de ligas áuricas, não-áuricas e titânio após a primeira e última fases de queima da porcelana. Monografia (Especialista em Prótese Dental) -
Pontifícia Universidade Católica, Rio de Janeiro, 2000.
AL-HIYASAT, A.S.; DARMANI, H. The effects of recasting on the citotoxity of base metal alloys.J Prosthet Dent. v.93, n. 2, p. 158-63, Feb 2005.
AMEER, M.A.; KHAMIS, E.; Al-MOTLAQ, M. Electrochemical behaviour of recasting Ni- Cr and Co-Cr non-precious dental alloys. Corrosion Science, v. 46, p.2825-36, 2004.
AMERICAN WELDING SOCIETY. Welding Handbook, 7th ed., v. 2, 1978.
ANUSAVICE, K.J.; RINGLE, R.D.; FAIRHURST; C.W. Adherence controlling elements in ceramo-metal system. I Precious alloys. J Dent Res, v 56, n 9, 1053-61 p, 1979.
ANUSAVICE, K.J. Materiais Dentários de Phillips. 10ª ed. Guanabara Koogan, Rio de Janeiro, 1998.
BARAN, G.R. Phase changes in base metal alloy along metal porcelain interfaces. J Dent
Res, n. 58, p. 2095-104, 1979.
BARGHI, N.; MCKEEHAN-WHITMER, M; ARANDA, R. Comparison of fracture strenght of porcelain-veneered-to-high noble and base metal alloys. J Prosthet Dent, v.57, n. 1,
p. 23-26, Jan 1987.
BERTOLOTTI, R. L.; MOFFA, J. P. Creep rate of porcelain bonding alloys as a function of temperature. J Dent Res, v. 59, n. 12, p. 2062-2065, Dec 1980.
BESSING, C. Evaluation of the castability of four different alternative alloys by measuring the marginal sharpness. Acta Odontol Scand, v. 44, n. 3, p. 165-172, 1986.
BEZZON, O.L.; RIBEIRO, R.F.; ROLLO, J.M.D.A.; CROSARA, S. Castability and resistance of ceramometal bonding in Ni-Cr and Ni-Cr-Be alloys. J Prosthet Dent,
v.85, n. 3, p. 299-304. March 2001.
BONFANTE, G. Seleção de cor e ajuste funcional e estético em prótese metalocerâmica. In: PEGORARO, L. F. Prótese fixa. São Paulo : Artes Médicas: 1998, v. 7, cap.10,. 255- 267 p.
BUMGARDNER, J. D.; LUCAS, L.C. Surface analysis of nickel-cromium dental alloys.
BUSATO, A.L.S. et al. Dentística: restaurações em dentes anteriores. São Paulo: Artes Médicas, 1997. p 481.
CENTRO.... <Disponível em: http://www.morrodacruz.com.br/entendendo/ent2.php> . Acesso em: 6 Março. 2006.
CHAN, D.C.; BLACKMAN, R.; KAISER, D.A.; CHUNG, K. The effect of sprue design on marginal accurancy of titanium casting. J. Oral Reabilil, v 25, n 6, p. 424-429, 1998.
CHAVES FILHO, A. R. Estudo comparativo da resistência à compressão entre coroa
metalocerâmica fraturada e reparada com resina composta, com coroa metalocerâmica íntegra e dente natural permanente. Tese (doutorado em dentística)
- Faculdade de São Paulo, 2001.
CHIDAMBARAM, P.R., EDWARDS, G.R.; OLSON, D.L. Metal & Mater Tran A 25, p. 2083, 1994.
CRAIG, R.G. Restorative Dental Materials. 10th ed. St Louis: Mosby,. 408-36 p, 1996.
CRAIG, R.G.; O' BRIEN, W.J., POWERS, J.M. Materiales dentales. Barcelona: Harcourt
Brace, 6ª ed. Cap. 14, 266 - 279 p. 1999.
CRUICKSHANKS-BOYD, D. W. Alternatives to gold porcelain bonding alloys. Dental
Update, v. 8, n. 3, p. 111-119, Mar. 1981.
DEKON, S.F.C.; VIEIRA, L.F.; BONFANTE, G. Avaliação da resistência de união metalocerâmica em função de diferentes tempos de oxidação prévia. Revista de Odontologia da Universidade de São Paulo, v. 13, n. 1, p. 57-60, Jan/Fev 1999.
DORSCH, P. Stresses in metal ceramic systems as a function of thermal history. Ceramic
Forum International Ber. Dt. Keram Ges, v. 58, p. 1-7, 1981.
EARNSHAW, R. Further measurements of casting shrinkage of dental cobalt-chromium alloys.Br Dent J., London, v. 109, n. 6, p.238-42, Sep. 1960.
EDWIN, J.R. Ceramo-Metal Restoration State of the Science. Dental Clinics of North
America, v. 21, n. 4, Oct. 1977.
EICHNER, K. Applications of metal alloys in dentristry – a review. Int dent J, v. 33, n. 1, p. 1-10, Mar. 1983.
FERNANDES NETO, A.J. Efeito da refundição na resistência de união com a porcelana
em uma liga de níquel-cromo. Dissertação (Mestrado) - Faculdade de Odontologia de
Bauru, Universidade de São Paulo, 1982.
FISHER, J. Ceramic bonding to a dental gold-titanium alloy. Biomaterials, v 23, 1303-11 p, 2002.
GARBIN, C.A.; PÉRES, C.A.S.; MARCOS, J.L.N.; PACHECO, A.O. Ligas do Sistema Cobre-alumínio: Avaliação de Propriedades Microestruturais. Revista Brasileira de Prótese Clínica e Laboratorial. v. 5, n. 27, 2003.
HADIAN, A.M.; Joining of silicon nitride-to-silicon nitride and to molybdenium foi high-
temperature applications. PhD Thesis, McGill University, Montreal, Canada, 1993,
apud: NASCIMENTO, R.M.; MARTINELLI, A.E.; BUSCHINELLI, A.J.A. Review Article: Recent advances in metal-ceramic brazing. Cerâmica, v. 49, p. 178-198, 2003 HAMMAD, I.A.; GOODKING, R.J.; GERBERICH, W.W.; A shear test of bond streght of
ceramometals. J Prosthet Dent, v. 58, n 4, p.431-7, 1987.
HAMMAD, I.A.; TALIC, Y.F. Designs of bond stregth tests for metal-ceramic complexes: a review of the literature. J Prosthet Dent, v. 75, n. 6, p. 602-8, June 1996.
HEGEDUS, C.; DAROCZI, L.; KOKENYESI, V.; BEKE, D.L. Comparative microestrutural study of the diffusion zone between Ni-Cr alloy and different dental ceramics. J. Dent Res, v. 81, p.334-7, 2002.
HESBY, D.A.; KOBES, P.; GARVER. D.G.; PELLEU. G.B. Physical properties of a repeatedly used nonprecious metal alloy. J Prosthet Dent, v. 44, n. 3, p. 291-93, Sept
1980.
HINMAN, R.W. et al. A technique for characterizing casting behaviour of dental alloys. J.
Dent. Res.,v. 64, p. 134-8 , 1985.
HOBO, S.; SHILLINGBURG, H.T. Porcelain fused to metal. Tooth preparation and
copping desing. J Prosthet dent, v 30, n 1, 28-36 p, 1973.
HORASAWA, N.; MAREK, M. The effect of recasting on corrosion of a silver-palladium alloy.Dental Materials. v. 20, p. 352-357, 2004.
HOWE, J.A.; Inter Mater Ver, v. 38, n. 5, p.257, 1993, apud: NASCIMENTO, R.M.; MARTINELLI, A.E.; BUSCHINELLI, A.J.A. Review Article: Recent advances in metal-ceramic brazing. Cerâmica, v. 49, p. 178-198, 2003.
HUANG, H.H et al. Effect of chemical composition of Ni-Cr dental casting alloys on the bonding characterization between porcelain and metal. Journal of Oral Reabilitation.
v. 32, p. 206-12, 2005.
HUGGET, E.F. Aleaciones metálicas para bases de prótesis. In: O’Brien, W.J.; Ryge, G. Materiales dentales y su seleccion. Buenos Aires: panamericana, p. 215-24, 1980.
JOHNSTON, J.F.; DYKEMA, R.W.; CUNNINGHAM, D.M. Porcelain veneers fused to cast gold crowns. J Amer Dent Ass, v. 57, p. 48-53, 1958.
KHAMIS, E.; SEDDIK, M.; Int Dental J v. 45, p.209, 1995, apud: AMEER, M.A.; KHAMIS, E.; Al-MOTLAQ, M. Electrochemical behaviour of recasting Ni-Cr and Co- Cr non-precious dental alloys. Corrosion Science, v. 46, p.2825-36, 2004.
KLOMP, J.T., G. De With, Mater & Manuf Proc., v. 8, n 2, p. 129, 1993, apud:
NASCIMENTO, R.M.; MARTINELLI, A.E.; BUSCHINELLI, A.J.A. Review Article: Recent advances in metal-ceramic brazing. Cerâmica, v. 49, p. 178-198, 2003.
KWOK, D.Y. et al. Measuring and interpreting contact angles: a complex issue. Colloids and Surfaces A: Physicochemical and Engeneering Aspects, v. 142, p 219-35, 1998.
LAND. C.H.; SOCKWELL, C.L.; SLUDER, T.B. Two years clinical evaluation of profile in posterior teeth. J. Dent. Res., n. 61, p. 215, 1982.
LANE, J.R. A survey of dental alloys. J. Am. Dent. Assoc., Chicago, v. 39, n. 4, p. 414-37, Oct 1949.
LEWIS, A.J., The effects of remelting on the mechanical properties of a nickel base partial denture casting alloy. Austral Dent J, Sidney, v. 20, n. 2, p. 89-93, Apr 1975.
MARTINELLI, A.E. Diffusion bonding of silicon carbide and silicon nitride to
molybdenum. PhD Thesis, McGill University, Montreal, Canada, 1996, apud:
NASCIMENTO, R.M.; MARTINELLI, A.E.; BUSCHINELLI, A.J.A. Review Article: Recent advances in metal-ceramic brazing. Cerâmica, v. 49, p. 178-198, 2003.
METALURGIA. <Disponível em: http://www.bibvirt.futuro.usp.br/textos/tem_outros/ cursprofissionalizante/tc2000/processos/65proc.pdf >. Acesso em: 3 Março. 2006. MOFFA, J.P. Alternative dental casting alloys. Dent Clin North Am, n. 27, p. 733-46, 1983.
MOFFA, J.P. et al. An evaluation of nonprecious alloys for the use with porcelain veneers. Part l: Physical properties. J. Prosthet. Dent., v. 30, n. 4, p. 424-31, Oct. 1973.
MOFFA, J.P. Physical and mechanical properties of gold and base metal alloys. Alternatives to gold alloys in dentistry. Bethesda: National Institutes of Health, Department of Education and Welfare, p. 81-93, 1977.
MOORHEAD, A.J.; KEATING, H. Welding J. v. 65, 1986.
NASCIMENTO, R.M. Metalização mecânica de Al2O3 para Brasagem Metal/Cerâmica, D. Eng. Thesis, Brasil, 2001, apud: NASCIMENTO, R.M.; MARTINELLI, A.E.; BUSCHINELLI, A.J.A. Review Article: Recent advances in metal-ceramic brazing. Cerâmica, vol 49, p. 178-198, 2003.
NASCIMENTO, R.M.; MARTINELLI, A.E.; BUSCHINELLI, A.J.A. Review Article: Recent advances in metal-ceramic brazing. Cerâmica, v. 49, p. 178-198, 2003.
NELSON, D.R.; PALIK, J.F.; MORRIS, H.F.; COMELLA, M.C. Recasting a nickel- chromium alloy. Reasearch and Education, v. 55, n. 1, p. 122-27, Jan ,1986.
NÓBREGA, M.C.; JOÃO, M; LA CROIX, S.P. Prensagem uniaxial de cerâmica dental. 2002.<Disponível em: http://www.odontologia .com.br/artigos.asp?id=162&idesp =3&ler=s>. Acesso em: 3 Março. 2006.
O’BRIEN, W.J.; KRING, J.E.; RYGE, G. Heat treatment of alloys to be used for the fused porcelain technique. J Prosthet Dent, St Louis, v. 14, n. 5, p. 955-60, Sept. 1964.
OLIVIERI, K.A.N.; NEISSER, M.P.; SOUZA, P.C.R.; BOTTINO, M.A. Mechanical properties and micro structural analysis of a NiCr alloy cast under different temperatures.Braz J Oral Sci. v. 3, n. 8, Jan/March 2004.
PANTALEÓN, D.S.; BATISTA, J.G.; BONFANTE, G. Características da infra-estrutura da restauração metalocerâmica através da técnica de fundição secundária. Odonto POPE,
Bauru, v.1, n. 4, p.219-34, 1997.
PAPAZOGLOU, E.; BRANTLEY, W.A.; JOHNSTON, W.M.; CARR, A.B. Effects of dental laboratory processing variables and in vitro testing medium on the porcelain adherence of high-palladium casting alloys. J Prosthet Dent, v. 79, n. 5, p.514-19, May 1998.
PEGORARO, L.F. Prótese fixa. São Paulo: Artes médicas, 2002.
PHILLIPS, R.W. Materiais dentários . Rio de Janeiro: Guanabara, 8a ed., cap. 31, 34p. 1982 PHILLIPS, R.W. Science of Dental Materials. 10th ed. Guanabara, 1998.
PHILLIPS, R.W. Science of Dental Materials. 9th ed. St Louis, Mosby, 469 p,1993.
PRESTON, J.D.; Perspectives in dental ceramics. Proceedings of the fourth international
symposium on ceramics. Chicago, USA: Quintessence. 415-431 p, 1988.
RIBEIRO, R.F. Avaliação de alguns efeitos de refundições sobre ligas de cobalto-cromo,
acrescidas ou não de liga virgem. Dissertação (mestrado) - Faculdade de Odontologia
de Ribeirão Preto da Universidade de São Paulo, Nov 1993.
RIBEIRO, R.F. Avaliação do comportamento de ligas de cobalto-cromo submetidas a
diferentes condições de reaproveitamento. Tese (doutorado) - Faculdade de
Odontologia de Ribeirão Preto da Universidade de São Paulo, Maio, 1998.
ROLLO, J.M.D.A.; ROSSITTI, S.M. Restauração metalocerâmica: um estudo comparativo da compatibilidade térmica de ligas Ni-Cr e porcelanas odontológicas. Rev Odontol Univ São Paulo, v.13, n.1, São Paulo, Jan./Mar1999.
SANTOS, C.N.; KATO, M.T.; CONTI, P.C. Avaliação das condutas adotadas por profissionais na utilização de coroas metalo-cerâmicas. J. Appl. Oral Sci. v.11, n. 4,
SCOLARO, J. Resistência de união entre 3 sistemas cerâmicos de uso odontológico com
uma liga de paládio-prata. Monografia (especialização em Prótese Dental) - Pontifícia
Universidade Católica, Rio de Janeiro, 2000.
SHELL, J.S.; NIELSEN, J.P. Study between bond gold alloys and porcelain. New Rochelle, J. F. Jelenko, 1963.
SHILLINGBURG, H. T.; HOBO, S.; WHITSETT, L. D. Fundamentos de prostodoncia fija. Chicago: Quintessence, 324 p, 1981.
SILVA FILHO, C.E.; MUENCH, A.; Propriedades mecânicas, físicas e de corrosão, e custo relativo de uma liga com baixo conteúdo de ouro (46%). Rev. Odontol Univ S Paulo,
v. 3, p. 390-3, 1989.
SILVER, M.; KLEIN, G.; HOWARD, M.C. Platinum-porcelain restauration. J Prosthet
Dent, v.6, n.5, 695-705 p, 1956.
SUGANUMA, K. Mater Res Soc Symp Proc. v. 314, p.51, 1993.
TAGGARD, W.H. A new and accurate method of making gold inlay. Dent. Cosmos, Chicago, v. 49, n. 11, p.1117-21, Nov. 1907.
TRUSHKOWSKY, R. Porcelain fracture: causes, prevention, and repair techniques. J. Mass
Dent Soc, Boston, v. 41, n. 1, p.29-34, 1992.
TSETSEKOU, A.; PAPADOPOULOS, T.; ADAMOPOULOS, O. Microestructure effect on the properties of a commercial low-fusing dental porcelain. Journal of materials science: materials in medicine, v. 3, p. 407-416, 2002.
VAN NOORT, R. Introduction of dental materials. 3th ed, London: Mosby, 1994.
WATAHA, J.C. Alloys for prosthodontic restoration. J Prosthet Dent. v. 87, n. 4, p. 351-62. April, 2002.
WEISS, P.A. New design parameters utilizing the properties of nickel-chromium superalloys.
Dent Clin North Amer, v. 21, n. 4, p. 769-89, Oct 1977.
WILWERDING, T. History of Dentristry. <Disponível em: http://cudental. creighton.edu/htm/history2001.pdf>. Acesso em: 11 Fev. 2006.
WU, Y.; MOSER, J.B.; JAMESON, L.M.; MALONE, W.F.P. The effect of oxidation heat treatment on porcelain bond strength in selected base metal alloys. J Prosthet Dent.,
v.66, n.4, p.439-44, Oct. 1991.
YAMAMOTO, M. Metal ceramics: principles and methods of Makoto Yamamoto. Chicago: Quintessence, 15-202 p. 1985a.
YAMAMOTO, M. Metal ceramics: principles and methods of Makoto Yamamoto. Chicago,