3.1 System features and institutional structures
3.1.3 Admissions
O cardanol foi obtido com sucesso a partir do Líquido da Casca da Castanha de Caju (LCC) e caracterizado pelas técnicas CG/EM, IV e RMN de 1H e 13C. Em seguida foi empregado como precursor para a síntese de cinco novos compostos como potenciais biolubrificantes.
Todos os compostos foram obtidos com sucesso através do uso de metodologias ambientalmente sustentáveis: condições livres de solvente, livres de catalisador e/ou utilizando irradiação de microondas. As estruturas químicas dos produtos obtidos foram confirmadas pelas técnicas de CG/EM, IV e RMN de 1H e 13C.
A análise de TGA indicou que as modificações químicas na estrutura do cardanol levaram à obtenção de produtos com maiores estabilidades termo-oxidativas, os quais apresentaram valores de T(onset) acima de 220 °C. Vale ressaltar que esses valores de Tonset foram iguais e/ou maiores que a maioria daqueles apresentados na literatura.
Semelhante aos resultados de DSC, todas as modificações químicas realizadas na estrutura do cardanol propiciaram a obtenção de biolubrificantes com maior estabilidade oxidativa. Os menores valores de OOT dos biolubrificantes insaturados (1 e 5) indicaram que esses compostos apresentaram uma menor resistência a este processo, o que corrobora com os dados obtidos a partir da TGA.
Os estudos reológicos destacaram que as diferentes modificações estruturais influenciaram diretamente nas viscosidades dos biolubrificantes. Os produtos das reações de epoxidação (2 e 6), por exemplo, apresentaram um aumento na viscosidade, quando comparados aos seus precursores (1 e 5, respectivamente), indicando que a presença do anel oxirano promoveu um maior número de interações moleculares que contribuíram para o aumento da viscosidade destes compostos.
REFERÊNCIAS
ABDULLAH, B.M.; ZUBAIRI, S.I.; HURI, H.Z.; HAIRUNISA, N.; YOUSIF, E.; BASU, R.C. Polyesters Based on Linoleic Acid for Biolubricant Basestocks: Low-Temperature, Tribological and Rheological Properties. Plos One, p. 1-15, 2016.
American Society for Testing and Materials. ASTM D2270-10: Calculating viscosity index
from kinematic viscosity at 40 and 100ºC. 2010
ANASTAS, P.; WARNER, J. Green Chemistry: Theory and Practice. 1. ed. New York: Oxford University Press, 1998.
ARAVIND, A.; JOY, M. L.; NAIR, K. P. Lubricant properties of biodegradable rubber tree seed (Hevea brasiliensis Muell. Arg) oil. Industrial Crops and Products, v. 74, p. 14–19, nov. 2015. Disponível em:<http://linkinghub.elsevier.com/retrieve/pii/S0926669015300236>. ARUMUGAM, S.; SRIRAM, G.; SUBADHRA, L. Synthesis, chemical modification and tribological evaluation of plant oil as bio-degradable low temperature lubricant. Procedia
Engineering, v. 38, p. 1508–1517, 2012.
BALACHANDRAN, V. S.; JADHAV, S. R.; VEMULA, P.K.; JOHN, G. Recent advances in cardanol chemistry in a nutshell: from a nut to nanomaterials. Chemical Society Reviews. v. 42, n. 2, 2013.
BALGUDE, D.; SABNIS, A. S. CNSL: an environment friendly alternative for the modern coating industry. Journal of Coatings Technology Research, v. 11, n. 2, p. 1–15, 2014. Banković-Ilić, I. B; Stamenković, O. S.; Veljković, V. B. Biodiesel production from non- edible plant oils. Renewable and Sustainable Energy Reviews, 16(6), p. 3621-3647, 2012. BART, J. C. J.; GUCCIARDI, E.; CAVALLARO, S. Biolubricant product development.
Biolubricants: science and technology , Woodhead Publishing: 473-526, 2013.
BNDES. Potencial de diversificação da industria química Brasileira, Relatório 3 - Óleos
lubrificantesBain CompanySão Paulo, 2014.
BORUGADDA, V. B.; GOUD, V. V. Improved thermo-oxidative stability of structurally modified waste cooking oil methyl esters for bio-lubricant application. Journal of Cleaner
Production, v. 112, p. 4515–4524, jan. 2016. Disponível em:
<http://linkinghub.elsevier.com/retrieve/pii/S0959652615007751>.
CAMPANELLA, A.; RUSTOY, E.; BALDESSARI, A.; BALTAN??S, M. A. Lubricants from chemically modified vegetable oils. Bioresource Technology, v. 101, n. 1, p. 245–254, 2010. Disponível em: <http://dx.doi.org/10.1016/j.biortech.2009.08.035>.
CAVALCANTE, I. M.; ROCHA, N. R. C.; MAIER, M. E.; LIMA, A. P. D.; NETO, D. M. A.; BRITO, D. H. A.; PETZHOLD, C. L.; SCHANZ, M. T. G. F.; RICARDO, N. M. P. S. Synthesis and characterization of new esters of oleic acid and glycerol analogues as potential lubricants. Industrial Crops and Products, v. 62, p. 453-459, 2014.
CHAO, M.; LI, W.; WANG, X. Influence of antioxidant on the thermal-oxidative degradation behavior and oxidation stability of synthetic ester. Thermochimica Acta, v. 591, p. 16–21, 2014. Disponível em: <http://dx.doi.org/10.1016/j.tca.2014.07.011>.
CLAYDEN, J.; GREEVES, N.; WARREN, S.; WOTHERS, P. Organic Chemistry. The
American Naturalist, v. 40, n. d, p. 1990–1992, 2001. Disponível em:
<http://books.google.com/books?id=Dy5-vEst37oC&pgis=1>.
CORREIA, S. J.; DAVID, J. P.; DAVID, J. M.; Metabólitos Secundários de Espécies de Anacardiaceae. Química Nova, v. 29, n. 6, p. 1287-1300, 2006.
DE SOUZA, V. H. R.; SILVA, S. A.; RAMOS, L. P.; ZAWADZKI, S. F. Synthesis and characterization of polyols derived from corn oil by epoxidation and ozonolysis. JAOCS,
Journal of the American Oil Chemists’ Society, v. 89, n. 9, p. 1723–1731, 2012.
DEKA, N.; MARIOTTE, A.-M.; BOUMENDJEL, A. Microwave mediated solvent-free acetylation of deactivated and hindered phenols. Green Chemistry, v. 3, n. 5, p. 263–264, 2001.
DELGADO, M. A.; GARCÍA-RICO, C.; FRANCO, J. M. The use of rosemary extracts in vegetable oil-based lubricants. Industrial Crops and Products, v. 62, p. 474–480, 2014. Disponível em: <http://dx.doi.org/10.1016/j.indcrop.2014.09.021>.
DODOS, G. S.; KARONIS, D.; ZANNIKOS, F.; LOIS, E. Renewable fuels and lubricants from Lunaria annua L. Industrial Crops and Products, v. 75, p. 43–50, nov. 2015. Disponível em: <http://linkinghub.elsevier.com/retrieve/pii/S092666901530128X>.
FAO. Disponível em: < http://www.fao.org/faostat/en/#data/QC>. Acesso em: 3 jan. 2017. FAO. Disponível em: <http://faostat3.fao.org/faostat-gateway/go/to/browse/Q/QC/E>.
Acesso em: 25 abr. 2016.
FONTANA, A.; GUERNELLI, S.; ZACCHERONI, N.; ZAPPACOSTA, R.; GENOVESE, D.; DE CRESCENTINI, L.; RIELA, S. Micellization properties of cardanol as a renewable co-surfactant. Org. Biomol. Chem., v. 13, n. 35, p. 9214–9222, 2015.
GOUD, V. V.; PRADHAN, N. C.; PATWARDHAN, A. V. Epoxidation of Karanja (Pongamia glabra) Oil by H2O2. JAOCS, v. 83, n. 7, p. 635-640, 2006.
HAINES, P. Principles of thermal analysis and calorimetry. Cambridge: Royal Society of Chemistry, 2002.
HORVÁTH, I. T.; ANASTAS, P. T. Innovations and Green Chemistry. Chemical Reviews, v. 107, n. 6, p. 2169–2173, jun. 2007. Disponível em:
<http://pubs.acs.org/doi/abs/10.1021/cr078380v>.
Ipiranga. Lubrificação Automotiva. Companhia Brasileira de Petróleo Ipiranga. Disponível
JUNIOR, a. C.; BARRETO, A.; ROSA, D.; MAIA, F.; LOMONACO, D.; MAZZETTO, S. Thermal and mechanical properties of biocomposites based on a cashew nut shell liquid matrix reinforced with bamboo fibers. Journal of Composite Materials, 2014. Disponível em: <http://jcm.sagepub.com/cgi/doi/10.1177/0021998314545182>.
KAPPE C. O. Microwave dielectric heating in synthetic organic chemistry. Chemical Society
Review, v. 37, p. 1127–1139, 2008.
KAPPE, C. O.; PIEBER, B.; DALLINGER, D. Microwave Effects in Organic Synthesis : Myth or Reality ?**. Microwave Chemistry. p. 1088–1094, 2013.
Rizvi, S.Q.A. A Comprehensive Review of Lubricant Chemistry, Technology, Selection, and Design. West Conshohocken: ASTM International, 2009.
KOTZEBUE, L. R. V.; RIBEIRO, F. W. M.; SOMBRA, V. G.; FEITOSA, J. P.A.; MELE, G.; MAZZETTO, S. E.; Lomonaco, D. Spectral and thermal studies on the synthesis and catalyzed oligomerization of novel cardanol-based benzoxazines. Polymer, v. 92, p. 189-200, 2016.
LEE, P. L.; WAN YUNUS, W. M. Z.; YEONG, S. K.; ABDULLAH, D. K.; LIM, W. H. Optimization of the epoxidation of methyl ester of palm fatty acid distillate. Journal of Oil
Palm Research, v. 21, n. DECEMBER, p. 675–682, 2009.
LI, W.; WANG, X. Bio-lubricants Derived from Waste Cooking Oil with Improved Oxidation Stability and Low-temperature Properties. Journal of Oleo Science, v. 64, n. 4, p. 367–374, 2015. Disponível em: <https://www.jstage.jst.go.jp/article/jos/64/4/64_ess14235/_article>. LOMONACO, D.; MAIA, F. J. N.; CLEMENTE, C. S.; MOTA, J. P. F.; JUNIOR, A. E. C.; MAZZETTO, S. E. Thermal studies of new biodiesel antioxidants synthesized from a natural occurring phenolic lipid. Fuel, v. 97, p. 552–559, 2012. Disponível em:
<http://dx.doi.org/10.1016/j.fuel.2012.01.059>.
Lozada, Z.; Suppes, G. J.; Tu Y-C.; Hsieh, F-H. Soy-based polyols from oxirane ring opening by alcoholysis reaction. J Appl Polym Sci, v. 113, p. 2552–2560, 2009.
MADANKAR, C. S.; DALAI, A. K.; NAIK, S. N. Green synthesis of biolubricant base stock from canola oil. Industrial Crops & Products, v. 44, p. 139–144, 2013. Disponível em: <http://dx.doi.org/10.1016/j.indcrop.2012.11.012>.
MAIA, F. J. N.; CLEMENTE, C. D. S.; OLIVEIRA, T. M. B. F.; LOMONACO, D.; OLIVEIRA, T. I. S.; ALMEIDA, M. O.; DE LIMA-NETO, P.; CORREIA, A. N.;
MAZZETO, S. E. Electrochemical and computational studies of phenolic antioxidants from cashew nut shell liquid. Electrochimica Acta, v. 79, p. 67–73, 2012. Disponível em: <http://dx.doi.org/10.1016/j.electacta.2012.06.086>.
MANG, T.; DRESEL, W. Lubricants and lubrication. 2007.
MATOS, P. R. R. (2011). Utilização de Óleos Vegetais com Bases Lubrificantes.
Departamento de Química. Brasília - DF, Universidade de Brasília. Dissertação de Mestrado: 102 p.
MAZZETTO, S. E.; LOMONACO, D.; MELE, G.; SALENTO, U.; ARNESANO, V. Óleo Da Castanha De Caju: Oportunidades E Desafios No Contexto Do Desenvolvimento E Sustentabilidade Industrial. Quim. Nova, v. 32, n. 3, p. 732–741, 2009.
MCNUTT, J.; HE, Q. S. Development of biolubricants from vegetable oils via chemical modification. Journal of Industrial and Engineering Chemistry, v. 36, p. 1–12, abr. 2016. Disponível em: <http://dx.doi.org/10.1016/j.jiec.2016.02.008>.
MELLO, R.; ALCALDE-ARAGONÉS, A.; GONZÁLEZ NÚÑEZ, M. E.; ASENSIO, G. Epoxidation of Olefins with a Silica-Supported Peracid. The Journal of Organic Chemistry, v. 77, n. 15, p. 6409–6413, 3 ago. 2012. Disponível em:
<http://pubs.acs.org/doi/abs/10.1021/jo300533b>.
Ministério de Minas e Energia. Disponível em: <http://www.mme.gov.br/>. Acesso em: 14
maio. 2016.
MOBARAK, H. M.; MOHAMAD, E. N.; MASJUKI, H. H.; KALAM, M. A.; MAHMUD, K. A. H. Al; HABIBULLAH, M.; ASHRAFUL, A. M. The prospects of biolubricants as
alternatives in automotive applications. Renewable and Sustainable Energy Reviews, v. 33, p. 34–43, 2014. Disponível em: <http://dx.doi.org/10.1016/j.rser.2014.01.062>.
MOHAPATRA, S.; NANDO, G. B. Cardanol: a green substitute for aromatic oil as a plasticizer in natural rubber. Rsc Advances, v. 4, n. JANUARY, p. 15406–15418, 2014. Disponível em: <<Go to ISI>://WOS:000334276600013>.
MOSAROF, M. H.; KALAM, M. A.; MASJUKI, H. H.; ARSLAN, A.; MONIRUL, I. M.; RUHUL, A. M.; SHAHIR, S. A.; KHUONG, L. S. Analysis of thermal stability and
lubrication characteristics of Millettia pinnata oil. Royal Society of Chemistry, RSC Adv., v. 6, p. 81414–81425, 2016.
MUSTHAFA, M. M. Synthetic lubrication oil influences on performance and emission characteristic of coated diesel engine fuelled by biodiesel blends. Applied Thermal
Engineering, v. 96, p. 607–612, 2016. Disponível em:
<http://dx.doi.org/10.1016/j.applthermaleng.2015.12.011>.
NAGENDRAMMA, P.; KAUL, S. Development of ecofriendly / biodegradable lubricants: An overview. Renewable and Sustainable Energy Reviews, 16(1), p. 764– 774, 2012. OLIVEIRA, D. L. V. (2011). Desenvolvimento tecnológico de produtos e processos
dedicados à biomassa da castanha de caju. Departamento de Química Orgânica e Inorgânica. Fortaleza - CE, Universidade Federal do Ceará. Tese de Doutorado: 115 f.
PADMAJA, K. V.; RAO, B. V. S. K.; REDDY, R. K.; BHASKAR, P. S.; SINGH, A. K.; PRASAD, R. B. N. 10-Undecenoic acid-based polyol esters as potential lubricant base stocks.
Industrial Crops and Products, v. 35, n. 1, p. 237–240, 2012. Disponível em: <http://dx.doi.org/10.1016/j.indcrop.2011.07.005>.
PANCHAL, T. M.; PATEL, A.; CHAUHAN, D. D.; THOMAS, M.; PATEL, J. V. A
Sustainable Energy Reviews, v.70, p. 65–70, 2017.
PANHEKAR, D.; KALAMBE, A.; SATPUTEB, S. Efficient acylation of phenols and amines under solvent free and catalyst free conditions. Journal of Chemical , Biological and
Physical Sciences, v. 3, n. 4, p. 2557–2561, 2013.
Portal Brasil. Disponível em: <http://www.brasi.gov.br/>. Acesso em: 3 janeiro 2017.
PRILESCHAJEW, N. Prileschajew, N. Ber. Dtsch. Chem. Ges., v. 42, p. 4811, 1909. QUINCHIA, L.A.; DELGADO, M.A.; REDDYHOFF, T.; GALLEGOS, C.; SPIKES, H.A. Tribological studies of potential vegetable oil-based lubricants containing environmentally friendly viscosity modifiers. Tribology International, v. 69, p. 110–117, 2014.
RABELLO, M. Aditivação de polímeros. 1. ed. [s.l: s.n.]
REDA, S. Y. Evaluation of antioxidants stability by thermal analysis and its protective effect in heated edible vegetable oil. Ciência e Tecnologia de Alimentos, v. 31, n. 2, p. 475–480, 2011.
RODRIGUES, L. K. O. (2013). Utilização do Éster de Soja como Biolubrificante. Engenharia Mecânica. Universidade Federal do Rio Grande do Norte. Dissertação de Mestrado: 111f. RUBIO, M.; RAMÍREZ-GALICIA, G.; JOVANY LÓPEZ-NAVA, L. Mechanism formation of peracids. Journal of Molecular Structure: THEOCHEM, v. 726, n. 1-3, p. 261–269, 2005.
RUGGIERO, A.; D’AMATO, R.; MEROLA, M.; VALÁŠEK, P.; MÜLLER, M. On the Tribological Performance of Vegetal Lubricants: Experimental Investigation on Jatropha Curcas L. oil. Procedia Engineering, v. 149, p. 431–437, 2016.
SALIH, N.; SALIMON, J.; YOUSIF, E. The physicochemical and tribological properties of oleic acid based triester biolubricants. Industrial Crops and Products, v. 34, n. 1, p. 1089– 1096, 2011. Disponível em: <http://dx.doi.org/10.1016/j.indcrop.2011.03.025>.
SALIH, N.; SALIMON, J.; YOUSIF, E. Synthetic biolubricant basestocks based on
environmentally friendly raw materials. Journal of King Saud University - Science, v. 24, n. 3, p. 221–226, 2012. Disponível em: <http://dx.doi.org/10.1016/j.jksus.2011.02.003>.
SALIMON, J.; SALIH, N. Chemical Modification of Oleic Acid Oil for Biolubricant Industrial Applications. Australian Journal of Basic and Applied Sciences, v. 4, n. 7, p. 1999–2003, 2010.
SALIMON, J.; SALIH, N.; YOUSIF, E. Biolubricants: Raw materials, chemical modifications and environmental benefits. European Journal of Lipid Science and
Technology, v. 112, n. 5, p. 519–530, 2010.
SALIMON, J.; SALIH, N.; YOUSIF, E. Biolubricant basestocks from chemically modified ricinoleic acid. Journal of King Saud University - Science, v. 24, n. 1, p. 11–17, 2012. Disponível em: <http://linkinghub.elsevier.com/retrieve/pii/S1018364710001230>.
SCHRAMM, g. Reologia e reometria: fundamentos teóricos e práticos. 2. ed. [s.l: s.n.] SHARMA, R. V.; SOMIDI, A. K. R.; DALAI, A. K. Preparation and properties evaluation of biolubricants derived from canola oil and canola biodiesel. Journal of Agricultural and
Food Chemistry, v. 63, n. 12, p. 3235–3242, 2015.
SIDRA - Sistema IBGE de Recuperação Automática. Disponível em:
<https://sidra.ibge.gov.br/home/lspa/rio-grande-do-norte>. Acesso em: 3 janeiro 2017. SILVA, J. A. C. d.; HABERT, A. C.; FREIRE, D. M. G. A potential biodegradable lubricant from castor biodiesel esters. Lubrication Science, 25(1), p. 53 – 61, 2013.
SILVA, A. E.; SILVA, L. R. R.; CAMARGO,I. A.; AGOSTINI, D. L. S.; ROSA, D. S.; OLIVEIRA, D. L. V.; FECHINE, P. B. A.; MAZZETTO, S. E. Cardanol-based thermoset plastic reinforced by sponge gourd fibers (Luffa cylindrica). Polímeros, p. 1-9, 2016.
THANGAVELU, S. K.; AHMED, A. S.; ANI, F. N. Review on bioethanol as alternative fuel for spark ignition engines. Renewable and Sustainable Energy Reviews, v. 56, p. 820–835, abr. 2016. Disponível em: <http://dx.doi.org/10.1016/j.rser.2015.11.089>.
VALLE, C. P. (2015). Síntese e Caracterização de Ésteres Lubrificantes a partir da Modificação do Óleo da Mamona Ricinus Comunis e Óleo das Vísceras da Tilápia
(Orechromis Niloticus). Departamento de Química Orgânica e Inorgânica. Fortaleza - CE, Universidade Federal do Ceará. Dissertação de Mestrado: 114 p.
VOIRIN, C.; CAILLOL, S.; SADAVARTE, N. V.; TAWADE, B. V.; BOUTEVIN, B.; WADGAONKAR, P. P. Functionalization of cardanol: towards biobased polymers and additives. Polymer Chemistry, v. 5, n. 9, p. 3142–3162, 2014. Disponível em:
<http://xlink.rsc.org/?DOI=c3py01194a>.
YAO, L.; SATYAM BHUYAN, S.; HAMMOND, E. G.; WANG, T.; SUNDARARAJAN, S. Boundary Lubrication Properties of Fatty Acid Derivatives as Potential Biolubricants. The
Journal of American Oil Chemists' Society, 2009.
ZACCHERIA, F.; MARIANI, M.; PSARO, R.; BONDIOLI, P.; RAVASIO, N.
Environmentally friendly lubricants through a zero waste process. “Applied Catalysis B,
Environmental”, v. 181, p. 581–586, 2016. Disponível em:
<http://dx.doi.org/10.1016/j.apcatb.2015.08.032>.
ZHANG, Y.-Q.; LI, Y.-C.; ZHU, J.-H.; LI, Z.-F.; GUO, G.-Z.; CHEN, D.-P. Microwave- Assisted Acetylation of Phenols without Catalyst Under Solvent Free Condition. Asian
Journal of Chemistry, v. 26, n. 22, p. 7746–7748, 2014. Disponível em:
<http://www.asianjournalofchemistry.co.in/user/journal/viewarticle.aspx?ArticleID=26_24_5 9>.
ZULKIFLI, N. W. M.; AZMAN, S. S. N.; KALAM, M. A.; MASJUKI, H. H.; YUNUS, R.; GULZAR, M. Lubricity of bio-based lubricant derived from different chemically modi fi ed fatty acid methyl ester. Tribology International, v. 93, p. 555–562, 2016.