Interlaboratory study of ice adhesion using different techniques

Using the values of ridging parameters defined in section 3.2 (assuming they are constant for the entire area), and in combination with ice concentration and level ice thickness

Polysiloxane soft coatings generally show lower ice adhesion strength than smooth surfaces and can reach an ultra-low ice adhesion strength due to the DI mechanism.. The θ rec

As part of enhancing the EU’s role in both civilian and military crisis management operations, the EU therefore elaborated on the CMCO concept as an internal measure for

1) Analysis of the Mid-Sound Stations: Table 4.1 gives the computed PSD of time series C1, E1 and H1 at three different frequencies. The PSD of the z-component at 0.001 Hz is

The SPH technique and the corpuscular technique are superior to the Eulerian technique and the Lagrangian technique (with erosion) when it is applied to materials that have fluid

Figure 7: Numerical average water Sherwood number with standard deviation as a function of the Schmidt number in water with different maximum mesh resolution in one

Summary of test results for refrozen brash ice and level ice under different strain rates, number of samples tested, avarage maximum compressive strength,

Figure 5 shows the reflection coefficient calculated using OASES for the water-ice interface with 2 m smooth sea-ice (Case b in Table III) and for a sea-ice layer with 0.6 m