• No results found

Mechanical and microstructual investigation of 3D-printed Alloy 625

N/A
N/A
Protected

Academic year: 2022

Share "Mechanical and microstructual investigation of 3D-printed Alloy 625"

Copied!
2
0
0

Laster.... (Se fulltekst nå)

Fulltekst

(1)

1 2 3 1 2 3

193,2 179 181 204 188,1 190,2

Gjenn.snitt STD.Avvik L.D.Gjen.Snitt Gjenn.snitt STD.Avvik L.D.Gjen.Snitt

184,4 7,7 180,0 194,1 8,6 189,2

1 2 3 1 2 3

147,2 148,6 149,1 179,3 167,3 176,2

Gjenn.snitt STD.Avvik L.D.Gjen.Snitt Gjenn.snitt STD.Avvik L.D.Gjen.Snitt

148,3 1,0 174,3 6,2

1 2 3 1 2 3

163,6 160,2 167 184,9 186,1 196,3

Gjenn.snitt STD.Avvik Gjenn.snitt STD.Avvik L.D.Gjen.Snitt

163,6 3,4 189,1 6,3 185,5

1 2 3 1 2 3

126,4 128,4 132,9 154,7 153,1 151,7

Gjenn.snitt STD.Avvik L.D.Gjen.Snitt Gjenn.snitt STD.Avvik L.D.Gjen.Snitt

129,2 3,3 153,2 1,5

1 2 3

156 155,1 154,8

Gjenn.snitt STD.Avvik L.D.Gjen.Snitt

155,3 0,6

Digital avlesning

SI SII

AI AII

A_ A=

LI LII

L=

(2)

1 2 3 1 2 3

196 182 184 208 190 193

Gjenn.snitt STD.Avvik L.D.Gjen.Snitt Gjenn.snitt STD.Avvik L.D.Gjen.Snitt

187,3 7,6 183 197 9,6 191,5

1 2 3 1 2 3

150 152 152 182 170 170

Gjenn.snitt STD.Avvik L.D.Gjen.Snitt Gjenn.snitt STD.Avvik L.D.Gjen.Snitt

151,3 1,2 174 6,9 170

1 2 3 1 2 3

166 163 170 188 189 199

Gjenn.snitt STD.Avvik L.D.Gjen.Snitt Gjenn.snitt STD.Avvik L.D.Gjen.Snitt

166,3 3,5 192 6,1 188,5

1 2 3 1 2 3

130 132 135 158 156 154

Gjenn.snitt STD.Avvik L.D.Gjen.Snitt Gjenn.snitt STD.Avvik L.D.Gjen.Snitt

132,3 2,5 156 2,0

1 2 3

160 158 158

Gjenn.snitt STD.Avvik L.D.Gjen.Snitt

158,7 1,2

Analog avlesning

LI LII

L=

SI SII

AI AII

A_ A=

Referanser

RELATERTE DOKUMENTER

The objective of this research is to distinguish 3D- printing technologies and applied materials in them that improve transparency in the façade to decrease

Horgar A (2018) Comparative study of mechanical properties and microstructure of components made by casting and wire + arc additive manufacturing of eutectic Al-12Si alloy.

The aim of the paper is to provide a material model of the alloy adopted able to reproduce its mechanical response to deformations imposed at room temperature

The present study aims at tailoring mechanical and transport prop- erties for 3D-printed PCL scaffolds through different structure designs for soft biological tissue applications..

Therefore, the aims of this study was to evaluate 3D printed scaffolds for bone tissue engineering (BTE) using two modified 3D printed scaffolds with different pore

Within the IPY-legacy project LOTEVA-GS, a unique hydrographical time series is being established by an annually repeated zonal transect across the Greenland Gyre centre

Our work was focused on microwave lens design using gradient index materials utilizing 3D printed objects with variable density dielectric materials, as described in sections 3.1

Stage and age after Solemdal (unpubl.).. Area of investigation north of R ~ s t in 1987 and 1988, Hatched and cross hatched area of spawning intensity investigation at Tromsa-