Characterization of method Uncertainty for Axial Pile Design

The effectiveness of FRCM composites to increase the axial capacity and elastic modulus of concrete cylinders was evaluated in this paper by means of uniaxial concentric

The pile foundations are particularly sensitive to permafrost temperatures and an increase in ground temperature along an existing pile is very likely to reduce its bearing capacity

The objectives of this paper include: (1) to describe single pile and tripod-pile centrifuge model tests under different loading conditions; (2) to observe the lateral responses of

In the presented paper, the axial and lateral behaviors of non-welded composite piles were investigated based on pile load test results. Recently, a composite

6: Top: Bore sight gain vs frequency, bottom: example H-plane radiation diagrams for 10, 14 and 18GHz (red = no lens, green = lens mounted at antenna aperture, blue =

The simultaneous data have been used to calculate spatial rain rate correlation and derive a prediction method based on separation distance and orientation with respect to

It expands the beam area in terms of the peak irradiance and truncates the expansion after the linear term which leads to the wrong statement that the peak irradiance at the

ABSTRACT This paper proposes a method for calculating a health indicator (HI) for low-speed axial rolling element bearing (REB) health assessment by utilizing the latent