Transfer function for maximum bending stress in the floater for 2 tori Transfer function for the maximum bending stress in the floater for 1 torus and 2 tori

Overall, this study demonstrates that (1) MPC is an adequate control strategy to include stress monitoring; (2) both linear and nonlinear formulations can limit the maximum

Additionally, the three point bending model did not have a stress concentration where the fracture initiated, and the stress values obtained from this study would therefore not be

creative way, as the timeline becomes a large structure ‘floating’ and bending through several rooms. 2, arrow 1) The display has organic shapes that function as integrated cases,

Transfer function for maximum relative vertical motion between the floater center line and the first order surface with respect to the circular wave. frequency for

The Water Ice Subsurface Deposit Observation on Mars (WISDOM) ground-penetrating radar has been designed to provide infor- mation about the nature of the shallow subsurface over

The DTF4 yields high quality point target responses at low squint with 3-look azimuth resolution 0.3 m while the DTF5 has to be used at larger squint with large Doppler

The advanced blast simulator (ABS) used at Defence Research and Development Canada (DRDC) – Suffield Research Centre has four sections: the driver, expansion/transition

gradient. Moreover Appendix D shows that the distances for the gradients in each point can be different depending on how steep the gradients in the [\ and 45 ° -direction are.