• No results found

A new flotation machine for macrofossils and archaeological objects

N/A
N/A
Protected

Academic year: 2022

Share "A new flotation machine for macrofossils and archaeological objects"

Copied!
1
0
0

Laster.... (Se fulltekst nå)

Fulltekst

(1)

51

AmS-Varia 37 A new flotation machine for macrofossils and small archaeological objects

A new flotation machine for macrofossils and small archaeological objects

SVERRE BAKKEVIG

Bakkevig, S. 2000: A new flotation machine for macrofossils and small archaeological objects. AmS-Varia 37, 51, Stavanger. ISSN 0332-6306, ISBN 82-7760-082-8, UDK 902.2.

At Museum of Archaeology, Stavanger, a new flotation machine has been constructed. The AMS-machine (Advanced Macrofossil Separation) is able to treat wet as well as dry soil samples and the machine is specially developed for the soil conditions in regions with a humid climate. In one single process of less than 15 minutes both macrofossils and small archaeological finds are gently separated from soil samples of about 4 litres. The main part of the AMS- machine is an inclined, water-filled and slowly rotating tube, length about 2 metres, with continuous water supply in the lower and closed part. When a soil sample is put in the ample tube, the water-flow first conducts floating organic material into a sieve below the higher and open end of the tube. In the next step, with the tube less inclined, wet and heavy organic material follows. Finally, with the tube in level, cleaned material like gravel and eventually small fragments of archaeological objects like shells, bones, flint, pottery and metal is gradually deposited into a coarser sieve, which allows sand and gravel to pass through. As the machine does not need constant attention, the operator is free to do other work meanwhile, or eventually operate two machines at the same time. After processing a soil sample, the tube is automatically cleaned by water, thus eliminating the risk of contaminating one sample with traces of the previous. During testing at the excavation sites in Rogaland, the capacity has been about 60 litres a day, and many interesting finds of charred cereals, weed seeds, coprolites, pottery-fragments, etc. have been detected. As the machine runs on electricity and uses pure water, the method is not harmful to the environment and does not affect material for 14C analysis. The Museum of Archaeology, Stavanger has made an application for patent, and in co-operation with a local producer the AMS-machine will be marketed towards relevant institutions.

Sverre Bakkevig, Arkeologisk museum i Stavanger, PO Box 478, N-4002 STAVANGER, NORWAY. Telephone:

(+47)51846000. Telefax: (+47) 51846199. E-mail: [email protected]

Referanser

RELATERTE DOKUMENTER

The dense gas atmospheric dispersion model SLAB predicts a higher initial chlorine concentration using the instantaneous or short duration pool option, compared to evaporation from

In the present case, UDFs are used both for extracting information from the turbulent velocity field for input to the model and for calculating the evaporation rate; the

It ex- amines quality of care issues amidst expanding coverage (43), the role of private health-services in the ‘public good’ (44), politics (5), solidarity and obligation (36,

Catalogued material from the northern sector (pottery and objects) is listed here by the proveniences: squares, and stratigraphical units. The stratigraphical situations are

ping spatial subareas. The processor structure is hierarchical, with small objects located in the leaf node processors and the larger objects in intermediate

Previously, we used the monitors to capture alpha mattes (where alpha also captured transparency) and we only estimated the surface re- flectance field using the overhead light

Figure 3: Evaluation of the distance between two fragments: extraction of the distance maps for the two fragments by projecting them onto a plane and evaluation of the distance d u v

We employ distance field volume representations, texture based volume rendering and procedural texturing techniques with Shader Model 2.0 flexible programmable graphics hardware..